Hyundai Veloster 2011-2016 Workshop Repair & Service Manual (3,000+ Pages, Printable PDF)

Hyundai Veloster 2011-2016 Workshop Repair & Service Manual (3,000+ Pages, Printable PDF)

Hyundai Veloster 2011-2016 Workshop Repair & Service Manual (3,000+ Pages, Printable PDF)


MHYDVLST1116OPES.PDF
Price: $14.99 USD
Please wait...

PREVIEW: Hyundai Veloster 2011-2016

This quality manual for Hyundai Veloster 2011-2016 is 100% complete and intact, no missing/corrupt pages/sections to freak you out! Buy from responsible seller and get instant download now without surprise; this manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

This is the same type of official service manual your local dealer will use when doing a repair. This manual for Hyundai Veloster 2011-2016 has detailed illustrations as well as step by step instructions. All pages are printable, so run off what you need and take it with you into the garage or workshop. These manuals are your number one source for repair and service information. They are specifically written for the do-it-yourself-er as well as the experienced mechanic. Using this repair manual is an inexpensive way to keep your vehicle working properly. Each manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with photos and illustrations, that guide the reader through each service and repair procedure.

Buy the best manual on the Internet from responsible merchant and get instant download without surprise.

INSTANT Delivery: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

PRINTABLE with Diagrams: Just print the manual out and start to work. You can also use the manual with your laptop in your garage.

Customer SATISFACTION: If there is any problem, just drop a quick email. Within hours the issue shall be taken care of.

REFUND Policy: We sell high quality products only. In case there is any problem with your purchase, a replacement link will be sent to you. If we are at fault, you get 100% refund.

EXCERPTS:

2013-14 TRANSMISSION Dual Clutch Transmission Control System – Veloster
Dual Clutch Transmission Control System – Veloster
DESCRIPTION AND OPERATION
DESCRIPTION
The Dual Clutch Transmission (DCT) control system measures required data to identify the state of the control target and computes the appropriate compensation value if adjustment is necessary. The actuator is controlled according to the computed compensation value to obtain desired output.
If transmission or driving-performance-related failure is detected, first perform self-diagnosis and basic transmission inspection (oil check).
Then use the diagnostic tool to inspect the transmission control system components.
COMPONENTS AND COMPONENTS LOCATION
COMPONENT LOCATION
Fig. 1: Identifying Dual Clutch Transmission, Control Module, Shift Lever
And Data Link Connector
Courtesy of HYUNDAI MOTOR AMERICA
DCT CONTROL MODULE (TCM)
DESCRIPTION AND OPERATION
Description
The Transmission Control Module (TCM) is like the brain for the DCT. It receives information from various sensors for a wide range of transmission controls to provide an optimal driving environment for the driver. The TCM is programmed for optimal operation in all driving conditions. If the TCM malfunctions, store the failure information in memory and provide the error information to a mechanic for fast and accurate repair.
REPAIR PROCEDURES
Inspection
TCM Inspection Procedure
1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground.
(Check the terminal connected to the chassis ground while using the back of the harness connector as the base point for TCM.)
Normal reading (resistance): Below 1ohms
2. Inspecting the TCM connector: Disconnect the TCM connector and visually inspect to see whether there is a bend on the ground terminal of the harness connector. Also visually check the connection pressure.
3. If no problem is found during inspection in step 1 and step 2, then the problem is with the TCM itself. In this case, replace the TCM and inspect the vehicle again.
4. Re-inspecting TCM: Install the TCM that was determined to have malfunctioned from step 3 in another vehicle. Reset the error code and then check the operation in that vehicle. If the vehicle operates without any problems, then inspect the first vehicle with the initial problem again.


MHYDVLST1116OPES.PDF
Price: $14.99 USD
Please wait...