2004-2010 Chevrolet Aveo Workshop Repair & Service Manual (8,275 Pages, Printable, iPad-ready PDF)
Complete digital workshop service and repair manual written for the Chevrolet Aveo; Production model years: 2004 2005 2006 2007 2008 2009 2010. All styles covered (all models, and engines). It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.
This QUALITY manual is 100% COMPLETE and INTACT, no MISSING/CORRUPT pages/sections to freak you out! Buy from responsible seller and get INSTANT DOWNLOAD now without wasting your hard-owned money on uncertainty or surprise; this manual is exactly as described.
Total Pages: 8,275 pages
File Format: PDF (Windows & Mac & Linux)
Delivery: instant download link displayed on checkout page & emailed to you after payment
Protection: DRM-free; without any restriction
This COMPLETE official full workshop service repair manual includes:
* Detailed sub-steps expand on repair procedure information
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Numbered instructions guide you through every repair procedure step by step.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.
* Numbered table of contents easy to use so that you can find the information you need fast.
* This manual also makes it easy to diagnose and repair problems with your machines electrical system.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!
EXCERPT (2004-2010 Chevrolet Aveo Service/Repair Manual):
DIAGNOSTIC STARTING POINT- ENGINE MECHANICAL
Begin the system diagnosis by reviewing the Symptoms-Engine Mechanical Symptoms-Engine Mechanical. Reviewing the description and operation information will help you determine the correct symptom diagnostic procedure when a malfunction exists. Reviewing the description and operation information will also help you determine if the condition described by the customer is normal operation. Refer to Engine Component Description in order to identify the correct procedure for diagnosing the system and where the procedure is located.
SYMPTOMS -ENGINE MECHANICAL
Strategy Based Diagnostics
1. Perform the Diagnostic System Check – Engine Controls in Engine Controls – 1.2L before using the symptom tables, if applicable.
2. Review the system operations in order to familiarise yourself with the system functions. Refer to Disassembled Views and Engine Component Description and Lubrication Description.
All diagnosis on a vehicle should follow a logical process. Strategy based diagnostics is a uniform approach for repairing all systems. The diagnostic flow may always be used in order to resolve a system condition. The diagnostic flow is the place to start when repairs are necessary.
• Inspect for aftermarket devices which could affect the operation of the engine.
• Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
• Check for the correct oil level, proper oil viscosity, and correct filter application.
• Verify the exact operating conditions under which the concern exists. Note factors such as engine RPM, ambient temperature, engine temperature, amount of engine warm-up time, and other specifics.
• Compare the engine sounds, if applicable, to a known good engine and make sure you are not trying to correct a normal condition.
Test the vehicle under the same conditions that the customer reported in order to verify the system is operating properly.
1. Remove the fuel pump fuse.
2. Start the engine. After it stalls, crank the engine for 10 seconds to rid the fuel system of fuel pressure.
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
3. Disconnect the negative battery cable.
4. Remove the air filter housing.
5. Remove the fuel rail. Refer to Fuel Rail Assembly Replacement in Engine Controls – 1.2L.
6. Disconnect the A/C pressure sensor connector.
7. Disconnect the power steering pump pressure sensor connector.
8. Disconnect the throttle cable bracket with the bolt.
9. Disconnect the manifold absolute pressure (MAP) sensor connector.
10. Remove the brake booster vacuum hose at the intake manifold.
11. Remove the exhaust gas recirculation (EGR) pipe and valve.
12. Remove the engine wiring harness from the intake manifold.
13. Remove the intake manifold retaining bolts and the nuts in the sequence shown.
14. Remove the intake manifold.
15. Remove the intake manifold gasket.
16. Remove the intake manifold subsidiary bracket bolts.
17. Remove the intake manifold subsidiary bracket.