INSTANT DOWNLOAD (add to cart)
Complete workshop & service manual with electrical wiring diagrams for Case 580L, 580 Super L, 590L, 590 Super L. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This Case 580L, 580 Super L, 590L, 590 Super L service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
1,702+1,468 pages, bookmarked, Searchable, Printable, high quality PDF
EXCERPT:
MASTER CYLINDER
Removal
STEP 1
Park the machine on a level surface. Raise the loader and lock the support strut to hold the loader.
STEP 2
Apply the parking brake.
STEP 3
Open the hood.
STEP 4
Loosen the clamp for the exhaust pipe at the muffler.
Remove the exhaust pipe from the muffler.
STEP 5
Remove the tie strap (1 ). Disconnect the electrical connectors (2) for the air restriction indicator. Loosen
the clamp (3) on the air cleaner hose. Disconnect the hose from the air cleaner.
STEP 6
Remove the cap screws and flat washers that fasten the cover to the uprights. Remove the cover and air cleaner as an assembly.
STEP 7
Remove the bolts, flat washers, and insulator curtain that covers the master cylinders.
NOTE: See the illustration on page 6 for the following steps.
STEP 8
Remove any dirt from the master cylinder (1) and the area around the master cylinder (1).
…