Caterpillar 259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Factory Service & Shop Manual


MCAT216B259B3OPES.zip
Price: $29.99 USD
Please wait...

Complete workshop & service manual with electrical wiring diagrams for Caterpillar 259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This service & repair manual collection (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
├── KENR9408 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3 Skid Steer Loader, Multi-terrain Loader Hydraulic System & Compact Track Loader Hydraulic System)
│   ├── collage.pdf
│   └── main.pdf
├── UENR0248 – Disassembly & Assembly (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Engine Supplement)
│   ├── Air Cleaner – Remove and Install.pdf
│   ├── Alternator – Remove and Install.pdf
│   ├── Battery and Battery Cable – Separate and Connect.pdf
│   ├── Cab – Tilt.pdf
│   ├── Electric Starting Motor – Remove and Install.pdf
│   ├── Engine Enclosure – Remove and Install.pdf
│   ├── Engine – Install .pdf
│   ├── Engine – Remove .pdf
│   ├── Fuel Priming Pump and Primary Filter (Water Separator) – Remove and Install.pdf
│   ├── Gear Motor (Fan) – Assemble.pdf
│   ├── Gear Motor (Fan) – Disassemble.pdf
│   ├── Gear Motor (Fan) – Install.pdf
│   ├── Gear Motor (Fan) – Remove.pdf
│   ├── Muffler – Remove and Install.pdf
│   ├── Pump Mounting – Remove and Install.pdf
│   ├── Radiator and Hydraulic Oil Cooler – Install.pdf
│   ├── Radiator and Hydraulic Oil Cooler – Remove.pdf
│   ├── System Pressure – Release – Hydraulic.pdf
│   ├── Turbocharger – Remove and Install.pdf
│   ├── Water Pump – Remove and Install.pdf
│   └── Water Temperature Regulator – Remove and Install.pdf
├── UENR0249 – Specifications (259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders & 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders)
│   ├── Axle – Front.pdf
│   ├── Axle.pdf
│   ├── Axle – Rear.pdf
│   ├── Bogie Wheel.pdf
│   ├── Control Manifold and Solenoid (Parking Brake and 2-Speed).pdf
│   ├── Control Manifold and Solenoid (Parking Brake).pdf
│   ├── Control Manifold and Solenoid (Work Tool Positioner).pdf
│   ├── Control Manifold (High Flow).pdf
│   ├── Control Manifold (Quick Coupler).pdf
│   ├── Control Valve (Work Tool).pdf
│   ├── Coupler Cylinder.pdf
│   ├── Engine Enclosure.pdf
│   ├── Front Idler .pdf
│   ├── Gas Spring Group (Cab).pdf
│   ├── Gear Motor (Fan, Demand).pdf
│   ├── Gear Motor (Fan).pdf
│   ├── Gear Pump.pdf
│   ├── Hydraulic Accumulator (Pilot Oil).pdf
│   ├── Hydraulic Oil Filter.pdf
│   ├── Hydraulic Tank.pdf
│   ├── Idler Wheel.pdf
│   ├── Lift Arm Cylinder and Mounting.pdf
│   ├── Lift Cylinder .pdf
│   ├── Lift Cylinder.pdf
│   ├── Machine Frame and Mounting.pdf
│   ├── Motor Mounting (Hydrostatic).pdf
│   ├── Pilot Operated Hydraulic Control – Hydrostatic.pdf
│   ├── Pilot Operated Hydraulic Control.pdf
│   ├── Piston Motor (Hydrostatic).pdf
│   ├── Piston Pump (Hydrostatic).pdf
│   ├── Pump Mounting (Hydrostatic).pdf
│   ├── Quick Coupler.pdf
│   ├── Radiator and Hydraulic Oil Cooler (Fan).pdf
│   ├── Radiator and Hydraulic Oil Cooler.pdf
│   ├── Radiator and Oil Cooler Mounting.pdf
│   ├── Return Manifold.pdf
│   ├── ROPS Mounting .pdf
│   ├── Sprocket.pdf
│   ├── Tandem Drive.pdf
│   ├── Tilt Cylinder – Left Hand.pdf
│   ├── Tilt Cylinder – Right Hand.pdf
│   ├── Tire and Rim.pdf
│   ├── Track Adjuster and Recoil.pdf
│   ├── Track Drive – Left Hand.pdf
│   ├── Track Drive – Right Hand.pdf
│   ├── Track Idler.pdf
│   ├── Track Roller Frame Mounting.pdf
│   ├── Track Roller .pdf
│   ├── Track Tensioner.pdf
│   ├── Undercarriage – Left Hand.pdf
│   └── Undercarriage – Right Hand.pdf
├── UENR0250 – Systems Operation (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems)
│   ├── Control Manifold and Solenoid (Work Tool Positioner) – If Equipped.pdf
│   ├── Control Valve (Work Tool).pdf
│   ├── Gear Pump.pdf
│   ├── General Information.pdf
│   ├── Governor Control.pdf
│   ├── Hydrostatic System.pdf
│   ├── Piston Motor (Hydrostatic).pdf
│   ├── Piston Pump (Hydrostatic).pdf
│   ├── Tandem Drive and Axle.pdf
│   ├── Undercarriage.pdf
│   └── Work Tool Hydraulic System.pdf
├── UENR0250 – Testing & Adjusting (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems)
│   ├── Accumulator (Pilot) – Test and Charge.pdf
│   ├── Control Manifold and Solenoid (Work Tool Positioner) – If Equipped.pdf
│   ├── Hydraulic Oil Contamination – Test.pdf
│   ├── Hydraulic System Troubleshooting.pdf
│   ├── Hydrostatic System – Flush and Fill.pdf
│   ├── Hydrostatic System – Test and Adjust.pdf
│   ├── Hydrostatic System Troubleshooting.pdf
│   ├── Line Relief Valve – Test and Adjust.pdf
│   ├── Machine Preparation.pdf
│   ├── Main Relief Valve – Test and Adjust.pdf
│   ├── Operational Checks.pdf
│   ├── Pilot System Pressure – Test.pdf
│   ├── Pump Flow – Test.pdf
│   ├── System Pressure – Release.pdf
│   ├── Visual Inspection.pdf
│   └── Worksheets – Troubleshoot.pdf
├── UENR0251 – Disassembly & Assembly (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train)
│   ├── Axle – Assemble – Heavy Duty.pdf
│   ├── Axle – Assemble.pdf
│   ├── Axle – Disassemble – Heavy Duty.pdf
│   ├── Axle – Disassemble.pdf
│   ├── Axle (Front) – Remove and Install.pdf
│   ├── Axle – Install.pdf
│   ├── Axle (Rear) – Remove and Install.pdf
│   ├── Axle – Remove .pdf
│   ├── Bogie Axle – Assemble.pdf
│   ├── Bogie Axle – Disassemble.pdf
│   ├── Bogie Axle – Install.pdf
│   ├── Bogie Axle – Remove.pdf
│   ├── Bogie Wheel – Install.pdf
│   ├── Bogie Wheel – Remove.pdf
│   ├── Chain (Drive) – Install.pdf
│   ├── Chain (Drive) – Remove.pdf
│   ├── Chain (Drive) Tension – Adjust.pdf
│   ├── Control Manifold and Solenoid (Parking Brake) – Remove and Install.pdf
│   ├── Heavy Duty Dual Face Seal – Install.pdf
│   ├── Idler – Assemble – Front.pdf
│   ├── Idler – Assemble – Rear.pdf
│   ├── Idler Axle – Assemble.pdf
│   ├── Idler Axle – Disassemble.pdf
│   ├── Idler Axle – Install.pdf
│   ├── Idler Axle – Remove.pdf
│   ├── Idler – Disassemble – Front.pdf
│   ├── Idler – Disassemble – Rear.pdf
│   ├── Idler – Install – Front.pdf
│   ├── Idler – Install – Rear.pdf
│   ├── Idler – Remove – Front.pdf
│   ├── Idler – Remove – Rear.pdf
│   ├── Idler Wheel – Remove and Install.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble – CTL.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble – Final Drive Bench Method.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble – Two Speed.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble – CTL.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble – Final Drive Bench Method.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble – Two Speed.pdf
│   ├── Piston Motor (Hydrostatic) – Install.pdf
│   ├── Piston Motor (Hydrostatic) – Remove.pdf
│   ├── Piston Pump (Hydrostatic) – Assemble.pdf
│   ├── Piston Pump (Hydrostatic) – Disassemble.pdf
│   ├── Piston Pump (Hydrostatic) – Install.pdf
│   ├── Piston Pump (Hydrostatic) – Remove.pdf
│   ├── Recoil Spring and Track Adjuster – Install.pdf
│   ├── Recoil Spring and Track Adjuster – Remove.pdf
│   ├── Recoil Spring – Assemble.pdf
│   ├── Recoil Spring – Disassemble.pdf
│   ├── Solenoid Valve and Mounting (Parking Brake) – Remove and Install – Two Speed.pdf
│   ├── Sprocket – Remove and Install.pdf
│   ├── System Pressure – Release – Hydraulic.pdf
│   ├── Tire and Rim – Remove and Install.pdf
│   ├── Track – Detension and Tension.pdf
│   ├── Track Drive – Assemble.pdf
│   ├── Track Drive – Disassemble.pdf
│   ├── Track Drive – Install.pdf
│   ├── Track Drive – Remove.pdf
│   ├── Track – Remove and Install.pdf
│   ├── Track Roller – Remove and Install.pdf
│   ├── Track (Rubber) – Detension and Tension.pdf
│   ├── Track (Rubber) – Remove and Install.pdf
│   ├── Track Tensioner – Remove and Install.pdf
│   ├── Undercarriage – Install.pdf
│   ├── Undercarriage – Remove and Install.pdf
│   └── Undercarriage – Remove.pdf
├── UENR0252 – Disassembly & Assembly (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems)
│   ├── Accumulator – Remove and Install.pdf
│   ├── Air Conditioner and Heater – Assemble.pdf
│   ├── Air Conditioner and Heater – Disassemble.pdf
│   ├── Air Conditioner and Heater – Install.pdf
│   ├── Air Conditioner and Heater – Remove.pdf
│   ├── Cab – Install.pdf
│   ├── Cab – Remove.pdf
│   ├── Cab – Tilt.pdf
│   ├── Control Valve (Work Tool) – Assemble.pdf
│   ├── Control Valve (Work Tool) – Disassemble.pdf
│   ├── Control Valve (Work Tool) – Install.pdf
│   ├── Control Valve (Work Tool) – Remove.pdf
│   ├── Coupler Cylinder – Remove and Install.pdf
│   ├── Diverter Valve – Remove and Install.pdf
│   ├── Gas Spring – Remove and Install – Extended Reach.pdf
│   ├── Gear Motor – Assemble.pdf
│   ├── Gear Motor – Disassemble.pdf
│   ├── Gear Motor – Install.pdf
│   ├── Gear Motor – Remove.pdf
│   ├── Gear Pump – Assemble – High Flow.pdf
│   ├── Gear Pump – Assemble.pdf
│   ├── Gear Pump – Disassemble – High Flow.pdf
│   ├── Gear Pump (Implement and Charge) – Assemble.pdf
│   ├── Gear Pump (Implement and Charge) – Disassemble.pdf
│   ├── Gear Pump – Install.pdf
│   ├── Gear Pump – Remove.pdf
│   ├── Hydraulic Tank – Install.pdf
│   ├── Hydraulic Tank – Remove.pdf
│   ├── Lift Arms – Install – Extended Reach Machines.pdf
│   ├── Lift Arms – Install – Radial Arc Machines.pdf
│   ├── Lift Arms – Remove – Extended Reach Machines.pdf
│   ├── Lift Arms – Remove – Radial Arc Machines.pdf
│   ├── Lift Cylinder – Remove and Install – Extended Reach Machines.pdf
│   ├── Lift Cylinder – Remove and Install – Radial Arc Machines.pdf
│   ├── Pilot Operated Hydraulic Control – Assemble.pdf
│   ├── Pilot Operated Hydraulic Control – Disassemble.pdf
│   ├── Pilot Operated Hydraulic Control – Install.pdf
│   ├── Pilot Operated Hydraulic Control – Remove.pdf
│   ├── Quick Coupler – Remove and Install.pdf
│   ├── Refrigerant Accumulator – Remove and Install.pdf
│   ├── Refrigerant Compressor and Support Housing – Remove and Install.pdf
│   ├── Refrigerant Compressor – Remove and Install.pdf
│   ├── Refrigerant Condenser – Remove and Install.pdf
│   ├── Seat – Remove and Install.pdf
│   ├── Solenoid Valve and Mounting (Coupler) – Remove and Install.pdf
│   ├── Solenoid Valve (Compressor Motor) – Remove and Install.pdf
│   ├── System Pressure – Release – Hydraulic.pdf
│   ├── Tilt Cylinder – Remove and Install.pdf
│   └── Window Wiper Motor – Remove and Install.pdf
├── UENR0254 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3 Skid Steer Loader & 257B3 Multi-Terrain Loader 259B3 Compact Track Loader Electrical System)
│   ├── collage.pdf
│   └── main.pdf
├── UENR0255 – Systems Operation (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System)
│   ├── Electrical Input Components.pdf
│   ├── Electrical Output Components.pdf
│   ├── Electronic Control Module.pdf
│   ├── Features.pdf
│   ├── General Information.pdf
│   └── Location of Electrical Components.pdf
├── UENR0255 – Testing & Adjusting (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System)
│   ├── Calibration.pdf
│   ├── Electrical Connector – Inspect.pdf
│   ├── Electronic Control Module (ECM) – Flash Program.pdf
│   ├── Electronic Control Module (ECM) – Replace.pdf
│   ├── System Schematic.pdf
│   ├── Wiring Harness (Open Circuit) – Test.pdf
│   └── Wiring Harness (Short Circuit) – Test.pdf
├── UENR0255 – Troubleshooting (259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System)
│   ├── Connector Locations.pdf
│   ├── Diagnostic Capabilities.pdf
│   ├── Diagnostic Code List.pdf
│   ├── Emerging Symptom Information.pdf
│   ├── General Information.pdf
│   ├── Indicator Lamp Does Not Illuminate During the Power Up Self Test.pdf
│   ├── Indicator Lamp Is On Continuously.pdf
│   ├── MID 039 – CID 0041 – FMI 03.pdf
│   ├── MID 039 – CID 0041 – FMI 04.pdf
│   ├── MID 039 – CID 0070 – FMI 03.pdf
│   ├── MID 039 – CID 0070 – FMI 04.pdf
│   ├── MID 039 – CID 0110 – FMI 03.pdf
│   ├── MID 039 – CID 0110 – FMI 04.pdf
│   ├── MID 039 – CID 0133 – FMI 04.pdf
│   ├── MID 039 – CID 0133 – FMI 05.pdf
│   ├── MID 039 – CID 0133 – FMI 06.pdf
│   ├── MID 039 – CID 0358 – FMI 03.pdf
│   ├── MID 039 – CID 0358 – FMI 05.pdf
│   ├── MID 039 – CID 0358 – FMI 06.pdf
│   ├── MID 039 – CID 0490 – FMI 03.pdf
│   ├── MID 039 – CID 0490 – FMI 04.pdf
│   ├── MID 039 – CID 0598 – FMI 03.pdf
│   ├── MID 039 – CID 0598 – FMI 05.pdf
│   ├── MID 039 – CID 0598 – FMI 06.pdf
│   ├── MID 039 – CID 0600 – FMI 03.pdf
│   ├── MID 039 – CID 0600 – FMI 04.pdf
│   ├── MID 039 – CID 0681 – FMI 03.pdf
│   ├── MID 039 – CID 0681 – FMI 05.pdf
│   ├── MID 039 – CID 0681 – FMI 06.pdf
│   ├── MID 039 – CID 1076 – FMI 03.pdf
│   ├── MID 039 – CID 1076 – FMI 06.pdf
│   ├── MID 039 – CID 1187 – FMI 04.pdf
│   ├── MID 039 – CID 1188 – FMI 04.pdf
│   ├── MID 039 – CID 1190 – FMI 04.pdf
│   ├── MID 039 – CID 1627 – FMI 04.pdf
│   ├── MID 039 – CID 1627 – FMI 05.pdf
│   ├── MID 039 – CID 1627 – FMI 06.pdf
│   ├── MID 039 – CID 1695 – FMI 04.pdf
│   ├── MID 039 – CID 2204 – FMI 03.pdf
│   ├── MID 039 – CID 2204 – FMI 04.pdf
│   ├── MID 039 – CID 2204 – FMI 08.pdf
│   ├── MID 039 – CID 2211 – FMI 03.pdf
│   ├── MID 039 – CID 2211 – FMI 05.pdf
│   ├── MID 039 – CID 2211 – FMI 06.pdf
│   ├── MID 039 – CID 2212 – FMI 03.pdf
│   ├── MID 039 – CID 2212 – FMI 05.pdf
│   ├── MID 039 – CID 2212 – FMI 06.pdf
│   ├── MID 039 – CID 2473 – FMI 04.pdf
│   ├── Power Supply Circuit of Electronic Control Module.pdf
│   ├── Service Tools.pdf
│   ├── Starting System.pdf
│   ├── Switch Circuits.pdf
│   ├── Symptom Troubleshooting.pdf
│   └── Using Caterpillar Electronic Technician to Determine Diagnostic Codes.pdf
├── UENR0256 – Disassembly & Assembly (216B3 and 226B3 Skid Steer Loaders and 247B3 Multi Terrain Loader Engine Supplement)
│   ├── Air Cleaner – Remove and Install.pdf
│   ├── Alternator – Remove and Install.pdf
│   ├── Battery and Battery Cable – Separate and Connect.pdf
│   ├── Cab – Tilt.pdf
│   ├── Electric Starting Motor – Remove and Install.pdf
│   ├── Engine Enclosure – Remove and Install.pdf
│   ├── Engine – Install .pdf
│   ├── Engine – Remove.pdf
│   ├── Fuel Filter Group – Remove and Install.pdf
│   ├── Gear Motor (Fan) – Install.pdf
│   ├── Gear Motor (Fan) – Remove.pdf
│   ├── Muffler – Remove and Install.pdf
│   ├── Pump Mounting – Remove and Install.pdf
│   ├── Radiator and Hydraulic Oil Cooler – Install.pdf
│   ├── Radiator and Hydraulic Oil Cooler – Remove.pdf
│   ├── System Pressure – Release – Hydraulic.pdf
│   ├── Water Pump – Remove and Install.pdf
│   └── Water Temperature Regulator – Remove and Install.pdf
├── UENR2643 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3 Skid Steer Loader & 257B3 Multi-Terrain Loader 259B3 Compact Track Loader Electrical System)
│   ├── collage.pdf
│   └── main.pdf
├── UENR3951 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3 Skid Steer Loader & 257B3 Multi-Terrain Loader 259B3 Compact Track Loader Hydraulic System)
│   ├── collage.pdf
│   └── main.pdf
└── UENR3952 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3 Skid Steer Loader & 257B3 Multi-Terrain Loader 259B3 Compact Track Loader Hydraulic System)
├── collage.pdf
└── main.pdf