Ferrari 458 Italia 2009-2015 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆
* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!
This high QUALITY official manual for Ferrari 458 Italia 2009-2015 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.
FORMAT: PDF
LANGUAGE: English
SIZE/PAGE: 2,012 Pages
OS: Windows/Mac OS X/Linux/Android/iOS
2009 2010 2011 2012 2013 2014 2015 Ferrari 458 Italia
INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.
CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.
PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.
REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.
Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.
This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Ferrari 458 Italia 2009-2015. All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.
EXCERPTS:
A3.14 Checking Blow-by system pipes and connections
Checking Blow-by system pipes and connections
Check the state of the pipes (1), (2), (3) and the tightness of the relative clamps, around the oil tank and intake ducts.
Check the connections. Replace the relative pipe and/or clamp if any leakage or sweating is noted.
Check the state of the pipes (4) and the tightness of the relative unions on both cylinder heads.
Replace the relative pipe and/or clamp if any leaks are noted.
B3.02 Fuel tank
Removing left hand fuel tank
Disconnect the battery ( F2.01).
Drain the fuel system ( B3.06).
Remove the rear subframe ( E2.02).
Remove the secondary air pump ( F3.12).
Remove the passenger compartment trim panels ( E4.04).
Remove the lower left hand lateral passenger compartment trim panel.
In the passenger compartment, push inwards the cable grommet (1).
Remove from the housing and take out the cap (2).
Disconnect the connector (3).
Disconnect the connector (4).
Undo the screw indicated by the red arrow on the ground cable (5).
Disconnect the pipe (6).
A “double-lock” safety clip is fitted on the union.
To disconnect the “double-lock” quick connector, using due caution and by pressing on both sides,
push the safety clip out of its seat until you hear the “unclick”.
The difference between the safety clip “clicked” and “unclicked” position is only a few millimetres.
Then press on both sides of the quick coupling and remove the pipe (6).
Undo the indicated fasteners. Remove the lower heat shield (7).
E3.12 Flat undertray sections and vehicle lifting
Lifting the vehicle
CAUTION
Before performing any maintenance on vehicles with the Stop&Start system, turn the ignition key to 0.
Before performing any maintenance procedures requiring the ignition key to be in position II on vehicles with the Stop&Start system, deactivate the Stop&Start system with the relative button, ensuring that the specific icon and the message “Stop&Start OFF” are shown on the TFT display, and that the LED on the on/off button itself is off.
Failure to do so may result in serious injury to persons working on the vehicle and in the vicinity of the vehicle in the event of the engine unexpectedly starting.
CAUTION
Failure to observe the operations below may pose a serious risk to the persons working or standing in the vicinity of the vehicle.
Two post vehicle lift
Fit the two front bushings (A) in the position indicated.