Posted on

Lexus CT200h 2010-2016 Workshop Repair & Service Manual


MLXCT200PES.zip
Price: $29.99 USD

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Lexus CT200h 2010-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Lexus CT200h 2010-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2014 ENGINE Engine Cooling System (Service Information) – CT200H
COOLANT (FOR ENGINE)
REPLACEMENT [12/2013 – ]
REPLACEMENT [12/2013 – ]
1. DRAIN COOLANT (for Engine)
WARNING: Do not remove the reserve tank cap or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot coolant and steam may be released and cause serious burns.
a. Remove the 2 clips.
b. Disengage the 2 guides to remove the center No. 4 engine under cover.
c. Connect a hose with an inside diameter of 9 mm (0.354 in.) to the radiator drain cock as shown in the illustration.
d. Loosen the radiator drain cock plug.
e. Remove the reserve tank cap. Then drain the coolant.
HINT: Collect the coolant in a container and dispose of it according to the regulations in your area.
f. Disconnect the hose from the radiator drain cock.
2. ADD COOLANT (for Engine)
a. Tighten the radiator drain cock plug by hand.
b. Add coolant to the B line of the radiator reserve tank assembly.