![FERRARI 1992-2005 360 MODENA/SPIDER Workshop Repair & Service Manual [COMPLETE & INFORMATIVE for DIY REPAIR]](http://pagelarge.com/wp-content/uploads/2015/12/Ferrari-360-1992-2005.jpg)
FERRARI 1992-2005 360 MODENA/SPIDER Workshop Repair & Service Manual [COMPLETE & INFORMATIVE for DIY REPAIR] ☆ ☆ ☆ ☆ ☆
* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!
This high QUALITY official manual for FERRARI 1992-2005 360 MODENA/SPIDER is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.
MAKE: Ferrari
YEAR: 1992 1993 1994 1995 1996 1997 1988 1999 2000 2001 2002 2003 2004 2005
MODEL: 360 Modena / 360 Spider
LANGUAGE: EN/DE/FR/IT
FORMAT: PDF
PAGE/SIZE: 1,428 Pages / 1.18 GB
INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.
CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.
PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.
REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.
Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.
This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Your FERRARI 1992-2005 360 MODENA/SPIDER (ALL MODELS ARE COVERED). All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.
EXCERPTS:
HYDRAULIC STEERING TANK
The hydraulic steering system’s tank is located on the panel dividing the engine from the passenger compartment, under the rear window. It is equipped with a plug with a stick that controls the liquid level within the system
~ A 3.19
• To remove it, the system must be emptied
~ E 2.01
• Detach the delivery pipe to the pump from the tank and the back-flow pipe from the steering box.
• Unscrew the screws (1) fastening the dividing panel and remove it together with the support brackets.
• After re-assembling, refill and drain the system
~ E 3.02
COOLING COIL
The coil used for cooling the system’s oil is fixed onto the water radiator, on the left side of the car.
In case of removal, it is necessary to empty the system
~ E 2.01
• Remove the left water radiator and separate the latter from the cooling coil
~ B 5.04
• After re-assembling, fill and drain the hydraulic steering system
~ E 3.02
VOLANTE DI GUIDA
II volante e regolabile sia in altezza che in profondata.
• Sbloccare la leva (A) tirandola verso il volante.
• Regolare la posizione del volante.
• Bloccare ii volante spingendo la leva (A) fino alla posizione iniziale.
Attenzione
Non effettuare la regolazione del volante con vettura in movimento.
• Per utilizzare l’avvisatore acustico premere sulle razze laterali, in corrispondenza del simbolo delle trombe (B).
SMONTAGGIO
STEERING HEEL
The steering wheel’s height and depth are both adjustable.
• Release lever (A) by pulling it towards the steering wheel.
• Adjust the steering wheel’s position.
• Lock the steering wheel by pushing the lever (A) to its initial position.
A Caution
~ Never adjust the steering wheel while the vehicle is moving.
• To use the horn, press the trumpet symbol (B) on the lateral spokes.
DISASSEMBLY
Important
Always make sure that the ignition key is in STOP position, before disassembling or replacing AIRBAG parts. We also recommend to switch the battery to the OFF position.
• Remove the AIRBAG module from the steering wheel
~ H 3.02
Caution
~ Handle and keep the AIRBAG modules with extreme care, following in detail the instructions
~ H 3.02
• Detach the connection ( 1) and the fasten ground connector (2 ) of the horns control cable.
• Unscrew the fastening screws (3) and remove the steering wheel from the hub.
RE-ASSEMBLY
• Fit the steering wheel on the hub securing it with the screws (3 ).
• Tighten the screws to the 6+7 Nm torque.
• Reconnect the horn’s control harness by fitting the fasten connector (2) in the grounding plate and re-attaching the connector
(1).
• Mount the AIRBAG module following the Instructions ~ H 3.02