Posted on

John Deere Compact Utility Tractor 2025R Service Technical Manual (TM127019)

John Deere Compact Utility Tractor 2025R Service Technical Manual (TM127019)

INSTANT DOWNLOAD
tm127019 – Compact Utility Tractor 2025R Technical Manual.pdf

Complete Diagnostics Test Repair Service manual for John Deere Compact Utility Tractor 2025R, with all the shop information to maintain, diagnostic, repair, sercvice like professional mechanics.

John Deere Compact Utility Tractors 2025R workshop Diagnosis Operation Repair Service Technical Manual (All Inclusive) includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

Total Pages: 1,112 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable, high quality)
Language: English

MAIN SECTIONS
 Foreword
   Introduction
      Thank You for Purchasing a John Deere Product
      Using Your Operator’s Manual
      Special Messages
      Attachments for Your Machine
      Machine Use
   Product Identification
      Record Identification Numbers
      Cab Serial Number
   Safety Labels
      Safety Label Location
      Pictorial Safety Signs
      CAUTION – LVU11641
      WARNING – LVU23360
      WARNING – LVU802017
      WARNING KEEP RIDERS OFF – LVU13286
   Safety
      Recognize Safety Information
      Understand Signal Words
      Follow Safety Instructions
      Prepare for Emergencies
      Wear Protective Clothing
      Protect Against Noise
      Handle Fuel Safely-Avoid Fires
      Fire Prevention
      In Case of Fire
      Avoid Static Electricity Risk When Refueling
      Use Foldable ROPS and Seat Belt Properly
      Stay Clear of Rotating Drivelines
      Use Steps and Handholds Correctly
      Read Operator Manuals for ISOBUS Implements
      Use Seat Belt Properly
      Vibration
      Operating the Tractor Safely
      Avoid Backover Accidents
      Limited Use in Forestry Operation
      Operating the Loader Tractor Safely
      Keep Riders Off Machine
      Passenger Seat
      Use Safety Lights and Devices
      Towing Trailers/Implements Safely (Mass)
      Use Caution On Slopes and Uneven Terrain
      Freeing a Mired Machine
      Avoid Contact with Agricultural Chemicals
      Handle Agricultural Chemicals Safely
      Handling Batteries Safely
      Avoid Heating Near Pressurized Fluid Lines
      Remove Paint Before Welding or Heating
      Handle Electronic Components and Brackets Safely
      Practice Safe Maintenance
      Avoid Hot Exhaust
      Clean Exhaust Filter Safely
      Work In Ventilated Area
      Support Machine Properly
      Prevent Machine Runaway
      Park Machine Safely
      Transport Tractor Safely
      Service Cooling System Safely
      Service Accumulator Systems Safely
      Service Tires Safely
      Service Front-Wheel Drive Tractor Safely
      Tightening Wheel Retaining Bolts/Nuts
      Avoid High-Pressure Fluids
      Do Not Open High-Pressure Fuel System
      Store Attachments Safely
      Dispose of Waste Properly
   Operating Controls
      Operator Station Controls
      Floor Panel Controls
   Operating
      Daily Operating Checklist
      Avoid Damage to Plastic and Painted Surfaces
      Cab Classification According to EN15695-1 (for Application of
Crop Protection Chemicals and Liquid Fertilizer)
      Adjusting Seat
      Using Seat Belt
      Using Light Switch
      Using Key Switch
      Using Horn
      Using Instrument Panel
      Using Turn Signal Switch
      Using Hazard Warning Light Switch
      Testing Safety Systems
      Testing the Neutral Start Switch
      Testing the Rear Power-Take-Off/Reverse Implement Option (PTO/RIO)
Switch
      Testing the Seat Switch
      Testing Mid-PTO/Seat Switch Interface
      Testing Rear PTO/Park Brake Interface
      Testing Reverse Implement Option (RIO)
      Using Brake Pedals
      Using Park Brake
      Using Throttle
      Using Fuel Shut-Off Valve
      Starting the Engine
      Cold Weather Starting Aids
      Warming and Idling the Engine
      Starting a Stalled Engine
      Stopping Machine
      Operating the Hydrostatic Transmission
      Using Reverse Implement Option (RIO)
      Using Cruise Control
      Using Differential Lock (Traction Assist)
      Using Mechanical Front Wheel Drive (MFWD)
      Using the Power-Take-Off (PTO) Safely
      Using Rear and Mid PTO (Operator on Seat)
      Using Rear PTO (Operator Off Seat)
      Using Drawbar Hitch
      Using 3-Point Hitch (2025R)
      Using 3-Point Hitch (2027R and 2032R)
      Using Optional iMatch™ Quick-Attach Hitch System
      Connecting Implement Hydraulic Hoses
      Using Hydraulic Dual Selective Control Valve (SCV) (2025R)
      Using Dual Selective Control Valve Lever (2027R and 2032R)
      Using Selective Control Valve (SCV) Lock Lever
      Locking Out Dual SCV Regen Function
      Using Mower Height Control Knob (2025R)
      Operating Cab (If Equipped)
      Ballasting Machine
      Transporting Machine on Trailer
      Transporting Machine
      Towing Loads
      Using Safety Chain
      Raising and Lowering Roll-Over Protective Structure (ROPS)
      Roll-Over Protective Structure Label
      Front Loader Installation
   Replacement Parts
      Service Literature
      Parts
      Part Numbers
   Service Intervals
      Servicing Your Machine
      As Needed
      After First 10 Hours
      Every 10 Hours or Daily
      After First 50 Hours
      Every 50 Hours
      Every 200 Hours
      Every 400 Hours
      Every 600 Hours
      Annually
      Every 1200 Hours
      Every Two Years or 2000 Hours
      Every Six Years or 6000 Hours
   Service Lubrication
      Grease
      Lubricating Machine Grease Fittings
      Lubricating Hydraulic Selective Control Valve (SCV) Linkage
      Lubricating Hood Latch
      Lubricating 3-Point Hitch
   Service Engine
      Engine Emissions Information
      Avoid Fumes
      Engine Oil
      Checking Engine Speeds
      Checking Engine Oil Level
      Changing Engine Oil and Filter
      Cleaning Dust Unloading Valve
      Servicing Air Filter Elements
      Checking Air Filter Intake Hoses and Clamps
      Service Cooling System Safely
      Recommended Engine Coolant
      Servicing Cooling System
      Checking Radiator Hoses and Clamps
      Cleaning Radiator Cooling Screen and Fins
      Servicing the Alternator Belt
      Checking and Cleaning Fuel Filter Sediment Bowl and Replacing
Filter
      Fuel Injection Pump
      Fuel Injection Nozzles
      Cleaning Front Grille Screens
   Service Transmission
      Gear Case Oil
      Checking Front Axle Oil Level
      Changing Front Axle Oil
      Transmission and Hydraulic Oil
      Checking Transmission Oil Level
      Changing Transmission Oil and Filter (2025R)
      Changing Transmission Oil and Filter (2027R and 2032R)
   Service Electrical
      WARNING:
      Service the Battery Safely
      Checking Battery Electrolyte Level
      Removing and Installing Battery
      Cleaning Battery and Terminals
      Using Booster Battery
      Replacing Headlight Bulb (2025R)
      Replacing Headlight Bulb (2027R and 2032R)
      Replacing Light Bulbs
      Replacing Fuses (2025R)
      Replacing Fuses (2027R and 2032R)
   Service Miscellaneous
      Using Proper Fuel (Diesel)
      Filling Fuel Tank
      Lifting Points for Jacking up the Tractor
      Raising and Lowering Hood
      Checking Wheel Bolts and Hardware
      Removing and Installing Wheels
      Checking Tire Pressure
      Selecting Front Tire Rolling Direction
      Cleaning Plastic Surfaces
      Cleaning and Repairing Metal Surfaces
   Troubleshooting
      Using Troubleshooting Chart
      Engine
      Electrical System
      Machine
      Brakes
      Steering
   Storage
      Storing Safety
      Preparing Machine for Storage
      Preparing Fuel and Engine For Storage
      Removing Machine From Storage
   Specifications
      Engine
      Drivetrain
      Electrical System
      Front Wheels and Tires
      Rear Wheels and Tires
      Front Tire Inflation Pressures (Maximum)
      Rear Tire Inflation Pressures (Maximum)
      Tire Combinations (2025R)
      Tire Combinations (2027R and 2032R)
      Tire Loads
      Weight Specifications
      Fluid Capacities
      Ground Speeds
      Dimensions
      Weight
      Sound Level (all)
      PTO Options (all)
      3-Point Hitch
      Coupling Devices (all)
      Torque Values – Inch Fastener Hardware
      Torque Values – Metric Hardware
   Declaration of Conformity
      EC Declaration of Conformity
   John Deere Quality Statement
      John Deere Quality
   Service Record
      Record Service Dates

tm127019 – Compact Utility Tractor 2025R

Table of Contents

Foreword

Section 10: Safety

Group 05: Safety

Recognize Safety Information

Understand Signal Words

Replace Safety Signs

Handle Fluids Safely—Avoid Fires

Prepare for Emergencies

Prevent Battery Explosions

Prevent Acid Burns

Wear Protective Clothing

Avoid High-Pressure Fluids

Avoid Heating Near Pressurized Fluid Lines

Service Machines Safely

Use Proper Tools

Park Machine Safely

Support Machine Properly

Use Proper Lifting Equipment

Work in Clean Area

Protect Against High Pressure Spray

Illuminate Work Area Safely

Work In Ventilated Area

Remove Paint Before Welding or Heating

Avoid Harmful Asbestos Dust

Service Tires Safely

Stay Clear of Rotating Drivelines

Service Cooling System Safely

Dispose of Waste Properly

Handle Chemical Products Safely

Live With Safety

Section 20: Specifications and Information

Group 05: General Specifications

Metric Bolt and Screw Torque Values

Unified Inch Bolt and Screw Torque Values

Metric Cap Screw Torque Values—Grade 7

Gasket Sealant Application

Service Recommendations For Flat Face O-Ring Seal Fittings

Service Recommendations for O-Ring Boss Fittings

Group 10: Fuel and Lubricants

Diesel Fuel

Handling and Storing Diesel Fuel

Diesel Engine Oil

Diesel Engine Break-In Oil

Alternative and Synthetic Lubricants

Lubricant Storage

Mixing of Lubricants

Grease

Transmission and Hydraulic Oil

Heavy Duty Diesel Engine Coolant

Group 15: Serial Number Locations

Serial Numbers

Machine Product Identification Number

Engine Serial Number

Section 30: Engine – Diesel

Group 05: Specifications

General Specifications

Operational Tests

Tests and Adjustment Specifications

Repair Specifications

Torque Specifications

Service Equipment and Tools

Special Tools

Other Materials

Group 10: Theory of Operation

Cooling System Operation

Lubrication System Operation

Fuel System Theory of Operation

Air System Theory of Operation

Group 15: Component Location

Engine

Fuel System

Group 20: Diagnostics

Starting Problems

Low Engine Output

Exhaust Abnormal Under Load

Engine Runs Rough

Excessive Fuel Consumption

Lubricating Oil

Temperature Problems

Low Compression

Engine Diagnostic Table

Group 25: Tests and Adjustments

Cylinder Compression Test

Throttle Cable Adjustment

Slow Idle Adjustment

Valve Clearance Adjustment

Valve Lift Check

Fuel Injection System Tests

Fuel Injection Nozzle Test

Injection Pump Static Timing Check

Injection Pump Timing (EPA Engines)

Thermostat Test

Fan/Alternator Belt Adjustment

Radiator Bubble Test

Cooling System Pressure Test

Radiator Cap Pressure Test

Engine Oil Pressure Test

Fuel Transfer Pump Pressure Test

Fuel Pump Flow Test

Fuel System Leakage Test

Bleed Fuel System

Group 30: Repair

Fan/Alternator Belt Removal and Installation

Muffler Removal and Installation

Exhaust Manifold Removal and Installation

Rocker Arm Cover Removal and Installation

Radiator Removal and Installation

Engine Removal and Installation

Rocker Arm and Push Rods

Cylinder Head Removal and Installation

Cylinder Head Recondition

Crankshaft Oil Seals

Timing Gear Cover

Camshaft End Play Check

Timing Gear Backlash Check

Idler Gear

Camshaft Followers

Camshaft

Oil Pan and Strainer

Connecting Rod Side Play Check

Crankshaft End Play Check

Connecting Rod Bearing Clearance Check

Crankshaft Main Bearing Clearance Check

Piston-To-Cylinder Head Clearance

Piston and Connecting Rod Repair

Cylinder Bore

Crankshaft and Main Bearings

Flywheel Removal and Installation

Engine Back Plate

Timing Gear Housing

Oil Pump

Coolant Temperature Switch

Thermostat Removal and Installation

Water Pump

Fuel Transfer Pump

Fuel Injection Nozzle

Fuel Injection Pump

Fuel Shutoff Solenoid Removal and Installation

Fuel Control and Governor Linkage Removal and Installation

Fuel Filter Assembly Removal and Installation

Fuel Filter Removal and Installation

Group 35: Starting Motor

Starting Motor Removal and Installation

Starting Motor Disassembly and Assembly

Starting Motor Inspection and Test

Starting Motor Gear Train

Starting Motor Solenoid

Alternator

Section 40: Electrical

Group 05: General Information

Reading Electrical Schematics

Theory Of Operation Information

Diagnostic Information

Wire Color Abbreviation Chart

Common Circuit Tests

Conductors for 12 Volt Circuits

Group 10: Specifications

System Specifications

Service Equipment and Tools

Other Materials

Group 15: Component Location

Electrical Components

Group 20: System Schematics

Schematic and Wiring Harness Legend

Electrical Schematic (1 of 6)

W1 Main Wiring Harness (1 of 4)

W2 Power Supply Wiring Harness

W3 Battery Cable Wiring Harness

W1 Main Wiring Harness Color Codes

W2 Power Supply Wiring Harness Color Codes

W3 Battery Cable Wiring Harness Color Codes

Group 25: Diagnostics & Operation

Power Circuit Operation

Power Circuit Electrical Schematic

Power Circuit Diagnosis

Cranking Circuit Operation

Cranking Circuit Electrical Schematic

Cranking Circuit Diagnosis

Engine Preheater Circuit Operation

Engine Preheater Circuit Electrical Schematic

Engine Preheater Circuit Diagnosis

Fuel Supply Operation

Engine Shutoff Circuit Operation

Fuel Supply/Engine Shutoff Circuit Electrical Schematic

Fuel Supply Diagnosis

Engine Shutoff Circuit Diagnosis

Charging Circuit Operation

Charging Circuit Electrical Schematic

Charging Circuit Diagnosis

PTO Circuit Operation

PTO Circuit Electrical Schematic

PTO Circuit Diagnosis

Control Panel Circuit Operation

Control Panel Circuit Electrical Schematic

Control Panel Circuit Diagnosis

Light Switch Circuit Operation

Light Switch Circuit Electrical Schematic

Light Switch Circuit Diagnosis

Turn Signal Circuit Operation

Turn Signal Circuit Electrical Schematic

Turn Signal Circuit Diagnosis

Group 30: Tests and Adjustments

Ground Circuit Test

Battery Voltage and Specific Gravity Test

Battery – Charge

Battery – Load Test

Unregulated Voltage Output Test

Stator Resistance Test

Unregulated Amperage Test – 55 Amp

Regulated Amperage and Voltage Test

Regulator/Rectifier Test

Starting Motor Solenoid Test

No-Load Amperage Draw and RPM Test

Starting Motor Amperage Draw Test

Engine Coolant Temperature Sensor Test

Engine Oil Pressure Switch Test

Glow Plug Test

Diode Test

Fuse Test

Control Panel Light Test

Light Switch Test

Fuel Pull-in Relay Test

Relay Test

Engine Preheater Relay Test

Key Switch Test

Seat Switch Test

Transmission Neutral Switch Test

Turn Signal Switch Test

Position Lights Switch Test

Hazard Lights Switch Test

Rear PTO Switch Test

PTO Switch Test

PTO Solenoid Test

Fuel Shutoff Solenoid Test

Fuel Gauge Sensor Test

PTO Solenoid Test

Parking Brake Switch Test and Adjustment

Brake Switch Test

Reverse Implement Option (RIO)Test

Section 45: Export Electrical

Group 05: Specifications

System Specifications

Service Equipment and Tools

Other Materials

Group 10: Component Location

Electrical Components

Group 15: System Schematics

Schematic and Wiring Harness Legend

Electrical Schematic (1 of 6)

W1 Main Wiring Harness (1 of 4)

W2 Power Supply Wiring Harness

W3 Battery Cable Wiring Harness

W4 Engine Wiring Harness

Y2 Fuel Shutoff Solenoid

W1 Main Wiring Harness Color Codes

W2 Power Supply Wiring Harness Color Codes

W3 Battery Cable Wiring Harness Color Codes

Group 20: Diagnostics and Operation

Power Circuit Operation

Power Circuit Electrical Schematic

Power Circuit Diagnosis

Cranking Circuit Operation

Cranking Circuit Electrical Schematic

Cranking Circuit Diagnosis

Engine Preheater Circuit Operation

Engine Preheater Circuit Electrical Schematic

Engine Preheater Circuit Diagnosis

Fuel Supply Operation

Engine Shutoff Circuit Operation

Fuel Supply/Engine Shutoff Electrical Schematic

Fuel Supply Diagnosis

Engine Shutoff Circuit Diagnosis

Charging Circuit Operation

Charging Circuit Electrical Schematic

Charging Circuit Diagnosis

PTO Circuit Operation

PTO Circuit Electrical Schematic

PTO Circuit Diagnosis

Control Panel Circuit Operation

Control Panel Circuit Electrical Schematic

Control Panel Circuit Diagnosis

Marker, Head, and Brake Light Circuit Operation

Marker, Head, and Brake Light Circuit Electrical Schematic

Marker, Head, and Brake Light Circuit Diagnosis

Hazard Lights and Turn Signal Lights Circuit Operation

Hazard Lights and Turn Signal Lights Circuit Electrical Schematic

Hazard Lights and Turn Signal Lights Circuit Diagnosis

Section 50: Power Train – Hydrostatic

Group 05: Specifications

Specifications

Essential or Recommended Tools

Service Equipment and Tools

Other Material

Group 10: Component Location

Drive Pedals and Linkage Components

Swash Plate and Control Arm Components

Center Case and Pumps Components

Differential Front Cover Components

Countershaft and Reduction Shaft Components

Differential Carrier Components

Rear Axle and Final Drive Components

PTO Clutch and Brake Shaft Components

PTO Drive and Output Shafts Components

Mid PTO Shaft Components

MFWD Front Drive Shaft Components

MFWD Front Axle Housing Components

MFWD Front Gear Case Components

MFWD Front Spindle and Final Drive Gears Components

Group 15: Theory of Operation

Drive Train Range Drive Gears

Rear and Mid PTO Drive

MFWD Drive Gears

Group 20: Diagnostics

Transmission Troubleshooting

Power Train Checks

Group 25: Tests and Adjustments

Hydrostatic High Pressure Relief Test

Charge Pump Pressure Test

Neutral Adjustment

Reverse Implement Sensor Removal and Installation

Reverse Implement Sensor Adjustment

Group 30: Repair

Transaxle Removal and Installation

Hydrostatic Pump and Motor Removal and Installation

Swashplate Removal and Installation

Rear PTO Shaft Removal and Installation

Rear Axle Removal

Rear Axle Installation

Rear Axle Housing Disassembly and Inspection

Rear Axle Housing Assembly

Transmission Center Section Disassembly and Assembly

Countershaft Disassembly and Assembly

Reduction Shaft Disassembly and Assembly

PTO Clutch Shaft Disassembly and Assembly

PTO Brake Disassembly and Assembly

PTO Output Shaft Disassembly and Assembly

MFWD Output Shaft Disassembly and Assembly

Differential Disassembly and Assembly

Mechanical Front Wheel Drive (MFWD) Removal and Installation

Final Drive Housing Disassembly and Inspection – MFWD

Final Drive Housing Assembly – MFWD

Final Drive Cover Disassembly and Inspection – MFWD

Final Drive Cover Assembly – MFWD

Spindle Housing Disassembly and Inspection – MFWD

Spindle Housing Assembly – MFWD

Drive Shaft Removal and Installation – MFWD

Differential Input Housing Disassembly – MFWD

Differential Input Housing Assembly – MFWD

Differential Disassembly and Inspection – MFWD

Differential Assembly – MFWD

Section 60: Hydraulics

Group 05: Specifications

Specifications

Service Equipment and Tools

Group 10: Component Locations

Drive Pedals Assembly

HST Drive Pedals Assembly – Exploded View

Hydraulic System

Hydraulic Pump Components

Hydraulic Pump and Filter Lines

Pump Shaft Components

Selective Control Valve Components

Selective Control Valve – Linkage and Controls Components

Selective Control Valve – Hydraulic Lines Components

Rockshaft Case Components

Rockshaft Lift Arms and Linkage Components

Rockshaft Lift Arms and Piston Components

Rockshaft Relief Valve Components

Rockshaft Stop Valve Components

Rockshaft Safety Valve

Divider Valve Components

Mid Rockshaft Components

Hydraulic Mid Rockshaft Components

Group 15: Hydraulic Schematics

Drive and Rockshaft Hydraulic Schematic

Steering and Rockshaft Schematic

Selective Control Valve (SCV) Schematic

Group 20: Operation and Diagnostics

Hydraulic System

Hydraulics – SCV Operation

Group 25: Troubleshooting

Hydraulics

Group 30: Theory of Operation

Hydraulics (Rockshaft)

System Pressure Relief

Speed Control Valve – Neutral

Rockshaft Control Valve – Raise

Rockshaft Control Valve – Lower

Rockshaft – Neutral

Group 35: Tests and Adjustments

Hydraulic Warmup Procedure

Rockshaft Position Feedback Linkage Adjustment (Rockshaft Travel Limit)

Rate of Drop/Stop Valve Adjustment

Rockshaft Lift Cycle Test

Rockshaft Leakage Test

System Relief Pressure Test

Hydraulic Pump Flow Test

Steering System Relief Pressure Test

Group 40: Repair

Hydraulic Pump Removal and Installation – Export

Selective Control Valve (SCV) Removal and Installation

Selective Control Valve (SCV) Distribution Lines Assembly Removal and Installation

Selective Control Valve (SCV) Disassembly and Assembly

Rockshaft Assembly Removal and Installation

Lift Arms and Rockshaft, Removal and Installation

Rockshaft Control Valve Removal and Installation

Rockshaft Control Valve Linkage Removal and Installation

Rockshaft Piston Removal and Installation

Divider Valve Removal and Installation

Divider Valve Disassembly and Assembly

Rate-of-Drop Valve and Adjuster Removal and Installation

Slow Return Valve Removal and Installation

Rockshaft Safety Valve Removal and Installation

Relief Valve Removal and Installation

Transmission Filter Removal and Installation

Mid Rockshaft Removal and Installation

Section 70: Steering

Group 05: Specifications

Specifications

Service Equipment and Tools

Group 10: Component Location

Steering System Components

Steering System Schematic

Group 15: Theory of Operation

Steering Operation

Group 20: Diagnostics

Steering

Noise

Steering Components

Group 25: Tests and Adjustments

Steering System Test

Group 30: Repair

Tie Rod Removal and Installation

Steering Cylinder Removal and Installation

Steering Wheel Removal and Installation

Steering Control Unit (SCU) Removal and Installation

Section 80: Brakes

Group 05: Specifications

Specifications

Group 10: Component Location

Brake Pedals and Linkage

Brake Pedal and Park Brake Components – Explode

Brake Pedal Components (Export)

Park Brake Components (Export)

Brake Housing Components

Group 15: Theory of Operation

Brakes

Group 20: Diagnostics

Brakes

Brake Check Points

Group 25: Tests and Adjustments

Brake Pedal Adjustment

Park Brake Adjustment – Export

Group 30: Repair

Brake Disassembly and Inspection

Brake Assembly

Brake Pedal Removal and Installation

Park Brake Linkage Removal and Installation

Park Brake Linkage Removal and Installation – (Export)

Section 90: Miscellaneous

Group 05: Specifications

3-Point Hitch

Capacities

Ground Speed

Group 10: Repair

Hood Removal and Installation

Control Panel Removal and Installation

Control Panel Lower Shroud Removal and Installation

Foot Rest Removal and Installation

Battery Removal and Installation

Front Wheel Removal and Installation

Rear Wheel Removal and Installation

Fuel Tank Removal and Installation

Seat and Seat Frame Removal and Installation

Roll Over Protection System Removal and Installation

Rear Fenders Removal and Installation

Fender/ROPS Support Removal and Installation

Three-Point Hitch Removal and Installation

INSTANT DOWNLOAD
tm127019 – Compact Utility Tractor 2025R Technical Manual.pdf