Posted on

Dodge Stratus 1995-2000 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR)

Dodge Stratus 1995-2000
Dodge Stratus 1995-2000

Dodge Stratus 1995-2000 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆


MDGSTRT9500OPES.PDF
Price: $12.99 USD

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Dodge Stratus 1995 1996 1997 1998 1999 2000 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
LANGUAGE: English
SIZE/PAGE: 256 MB
OS: Windows/Mac OS X/Linux/Android/iOS

1997 JA Stratus Sedan
1997 JX Stratus Convertible
1998 JA Status Sedan
1998 JX Stratus Convertible
1999 JA Stratus
2000 JX Stratus Convertible

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Dodge Stratus 1995-2000. All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

GROUP TAB LOCATOR
IN Introduction
INa Introduction
0 Lubrication and Maintenance
2 Suspension
3 Differential and Driveline
5 Brakes
6a Clutch
7 Cooling System
7a Cooling System
8A Battery
8B Starting Systems
8C Charging System
8Ca Charging System
8D Ignition System
8Da Ignition System
8E Instrument Panel Systems
8Ea Instrument Panel Systems
8F Audio Systems
8G Horn Systems
8H Vehicle Speed Control System
8J Turn Signal and Hazard Warning Systems
8Ja Turn Signal and Hazard Warning Systems
8K Windshield Wipers and Washers
8L Lamps
8La Lamps
8M Passive Restraint Systems
8N Electrically Heated Systems
😯 Power Distribution Systems
8P Power Lock Systems
8Pa Power Lock Systems
8Q Vehicle Theft/Security Systems
8R Power Seat Systems
8S Power Window Systems
8T Power Mirror Systems
8U Chime/Buzzer Warning Systems
8Ua Chime/Buzzer Warning Systems
8W Wiring Diagrams
9 Engine
9a Engine
11 Exhaust System
11a Exhaust System
13 Frame and Bumpers
14 Fuel System
14a Fuel System
19 Steering
19a Steering
21 Transaxle
21a Transaxle
22 Tires and Wheels
23 Body
24 Heating and Air Conditioning
25 Emission Control Systems
25a Emission Control Systems

CLEANING AND INSPECTION
CLEANING VALVE BODY
Prior to removing any transaxle parts, plug all openings and clean unit, preferably by steam. Cleanliness through entire disassembly and assembly cannot be overemphasized. When disassembling, each part should be washed in a suitable solvent, then dried by compressed air. Do not wipe parts with shop towels. All mating surfaces in the transaxles are accurately machined; therefore, careful handling of all parts must be exercised to avoid nicks or burrs.
NOTE: Tag all springs, as they are removed, for reassembly identification.
ADJUSTMENTS
GEARSHIFT LINKAGE ADJUSTMENT
Normal operation of the Park/Neutral Position
Switch provides a quick check to confirm proper linkage adjustment.
Move the selector level slowly forward until it clicks into the (P) Park position. The starter should operate.
After checking the (P) position, move selector slowly toward the (N) Neutral position until lever is in the (N) position. If the starter will also operate at this point the gearshift linkage is properly adjusted.
If the starter fails to operate in either position, linkage adjustment is required.

PINION FACTOR PROCEDURE
The vehicle speed readings for the speedometer are taken from the output speed sensor. The TCM must be calibrated to the different combinations of equipment available. Pinion Factor allows the technician to set the Transmission Control Module initial setting so that the speedometer readings will be correct.
Failure to perform this procedure will cause a No Speedometer Operation condition.
This procedure must be performed if the Transmission Control Module has been replaced.
To properly read or reset the Pinion Factor, it is necessary to use a DRB scan tool. Perform the following steps with the DRB scan tool to read or reset the
Pinion Factor:
(1) Plug the DRB scan tool into the data link connector located under the instrument panel.
(2) Select the Transmission menu.
(3) Select the Miscellaneous menu.
(4) Select Pinion Factor. Then follow the instructions on the DRB scan tool screen.
REMOVAL AND INSTALLATION
GEARSHIFT CABLE
REMOVAL
(1) Place transaxle in PARK.
(2) Disconnect battery negative cable at left strut tower.
(3) Remove air cleaner assembly.
(4) Disconnect battery positive cable.
(5) Disconnect Transmission Control Module (TCM) connector. Remove TCM.
(6) Pull Power Distribution Center (PDC) up and out of the way.
(7) Using a pry tool, pry up on cable at manual valve lever and remove cable from lever (Fig. 35).
(8) Remove the screw from the cable bracket at the
transaxle (Fig. 35).


MDGSTRT9500OPES.PDF
Price: $12.99 USD

Posted on

Dodge Sprinter 2006 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆

Dodge Sprinter 2006 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR)
Dodge Sprinter 2006 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR)

MDGSPRT06OPES.PDF
Price: $12.99 USD

Dodge Sprinter 2006 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Dodge VA Sprinter 2006 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

MAKE: Dodge / Mercedes-Benz / Freightliner
MODEL: VA Sprinter
YEAR: 2006 (1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 applicable)

FORMAT: PDF
LANGUAGE: English
SIZE/PAGE: MB
OS: Windows/Mac OS X/Linux/Android/iOS

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Dodge Sprinter 2006. All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

GROUP TAB LOCATOR
Introduction
0 Lubrication & Maintenance
2 Suspension
3 Differential & Driveline
5 Brakes
7 Cooling
8A Audio/Video
8B Chime/Buzzer
8E Electronic Control Modules
8F Engine Systems
8G Heated Systems
8H Horn
8I Ignition Control
8J Instrument Cluster
8L Lamps
8N Power Systems
😯 Restraints
8P Speed Control
8Q Vehicle Theft Security
8R Wipers/Washers
8W Wiring
9 Engine
11 Exhaust System
13 Frame & Bumpers
14 Fuel System
19 Steering
21 Transmission
22 Tires/Wheels
23 Body
24 Heating & Air Conditioning
25 Emissions Control
Component and System Index
Service Manual Comment Forms (Rear of Manual)

3.3 BRAKE ASSIST SYSTEM (HBA)
The Brake Assist System (HBA) analyzes how hard and fast the driver wants to brake. It monitors the brake pressure via a pressure sensor. The passenger car brake assist system uses a vacuum booster solenoid. The Sprinter uses the hydraulic control unit to develop the brake pressure.
3.4 TCS (ASR)
The primary function of the Traction Control System is to reduce wheel slip and maintain traction at the driven wheels when the road surfaces are slippery. The
Traction Control System reduces wheel slip by applying the brake that has lost traction. The system is designed to operate at speeds below 50 km/h (30 mph). The engine’s torque can be reduced by the ECM via the CAN C Bus, if necessary. The TCS can be deactivated with switch on the dash. The Traction Control System uses the ABS to indicate spinning tires to enable the traction control function. The TCS software is in the CAB.
The TCS (ASR) performs the following functions:
1. Engine power derate
2. Engine deceleration regulation. If the vehicle is on a patch of ice, the simple action of releasing the throttle is enough to cause the rear wheels to slip. To avoid this, the throttle input is regulated so power drops slowly instead of abruptly. The engine power is reduced (decelerated) as necessary.

STANDARD PROCEDURE – HANDLING NON – DEPLOYED SUPPLEMENTAL RESTRAINTS
At no time should any source of electricity be permitted near the inflator on the back of a non-deployed airbag or seat belt tensioner. When carrying a non-deployed airbag, the trim cover or airbag cushion side of the unit should be pointed away from the body to minimize injury in the event of an accidental deployment. If the airbag unit is placed on a bench or any other surface, the trim cover or airbag cushion side of the unit should be face up to minimize movement in the event of an accidental deployment. When handling a non-deployed seat belt tensioner, take proper care to keep fingers out from under the retractor cover and away from the seat belt webbing where it exits from the retractor cover. In addition, the supplemental restraint system should be disarmed whenever any steering wheel, steering column, seat belt tensioner, airbag, impact sensor, or instrument panel components require diagnosis or service. Failure to observe this warning could result in accidental deployment and possible personal injury.
All damaged, faulty or non-deployed airbags and seat belt tensioners which are replaced on vehicles are to be handled and disposed of properly. If an airbag or seat belt tensioner unit is faulty or damaged and non-deployed, refer to the Hazardous Substance Control System for proper disposal. Dispose of all
non-deployed and deployed airbags and seat belt tensioners in a manner consistent with state, provincial, local and federal regulations.
SUPPLEMENTAL RESTRAINT STORAGE
Airbags and seat belt tensioners must be stored in their original, special container until they are used for service. Also, they must be stored in a clean, dry environment; away from sources of extreme heat, sparks, and high electrical energy. Always place or store any airbag on a surface with its trim cover or airbag cushion side facing up, to minimize movement in case of an accidental deployment.


MDGSPRT06OPES.PDF
Price: $12.99 USD

Posted on

Dodge Ramcharger 1993 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR)

Dodge Ramcharger 1993 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR)
Dodge Ramcharger 1993 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR)

Dodge Ramcharger 1993 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆


INSTANT DOWNLOAD



* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Dodge Ramcharger 1993 Pickup is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
LANGUAGE: English
SIZE/PAGE: 1,500 Pages
OS: Windows/Mac OS X/Linux/Android/iOS

MAKE: Dodge
MODEL: D150/D250/D350, W150/W250/W350 RAMCHARGER Rear Wheel Drive Truck
YEAR: 1993 (1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 applicable)

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Dodge Ramcharger 1993 Truck. All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

GROUP TAB LOCATOR
Introduction
0 Lubrication and Maintenance
2 Front Suspension and Axle
3 Rear Suspension and Axles
5 Brakes
6 Clutch
7 Cooling System
8 Electrical
9 Engines
11 Exhaust System and Intake Manifold
13 Frame and Bumpers
14 Fuel System
16 Propeller Shafts
19 Steering
21 Transmission and Transfer Case
22 Wheels and Tires
23 B o d y Components
24 Heating and Air Conditioning
25 Emission Control Systems
Component and System Index
Service Manual Comment Forms (Rear of Manual)

TRANSMISSION INSTALLATION—2-WHEEL DRIVE
(1) Apply light coat of Mopar high temperature bearing grease to contact surfaces of following components:
• drive gear splines and pilot bearing hub
• release bearing slide surface of front retainer
• pilot bearing
• release bearing bore
• release fork
• release fork ball stud
• propeller shaft slip yoke
(2) Fill transmission with recommended lubricant.
Correct fill level is bottom edge of fill plug hole.
(3) Mount transmission on jack and position transmission under vehicle.
(4) Raise transmission until drive gear is centered in release bearing and clutch disc hub.
(5) Move transmission forward and start drive gear in release bearing, clutch disc and pilot bushing.
(6) Work transmission forward until seated against clutch housing. Do not allow transmission to remain unsupported after drive gear has entered clutch disc.
(7) Install and tighten transmission-to-clutch housing bolts to 108 N*m (80 ft. lbs.) torque.
(8) Install clutch slave cylinder.
(9) Connect speed sensor and backup light switch wires.
(10) Position transmission harness wires in clips on shift cover.
(11) Install transmission mount on transmission or rear crossmember.
(12) Install rear crossmember.
(13) Remove transmission jack and engine support
fixture.
(14) Align and connect propeller shaft.
(15) Fill transmission with required lubricant, if necessary.
(16) Lower vehicle.
(17) Install shift lever on transmission stub lever.
(18) Install shift boot and bezel.
(19) Connect battery negative cable.

EGR TUBE-GAS POWERED ENGINES
REMOVAL
(1) Remove air filter housing.
(2) Remove the spark plug cable loom and plug cables from valve cover mounting stud at rear of right valve cover. Position spark plug cables to top of valve cover.
(3) Disconnect two vacuum hoses at exhaust gas recirculation (EGR) valve.
(4) Remove 2 EGR valve mounting bolts (Fig. 5) and remove EGR valve. Discard old gasket.
(5) Disconnect electrical connector at engine oil pressure sending unit.
(6) To prevent damage to oil pressure sending unit, a special tool, such as number C-4597 must be used
(Fig. 6). Remove sending unit from engine.
(7) Loosen EGR tube mounting nut at intake manifold (Fig. 7).
Fig. 7 EGR Tube—Typical
(8) Remove EGR tube mounting bolts at exhaust manifold (Fig. 7) and remove EGR tube.


INSTANT DOWNLOAD



Posted on

Dodge Ram 1500-2500-3500 Pickup Truck 1999-2009 Workshop Repair & Service Manual (1.3 GB PDF, COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆

Dodge Ram 1500-2500-3500 Pickup Truck 1999-2009 Workshop Repair & Service Manual (1.3 GB PDF, COMPLETE & INFORMATIVE for DIY REPAIR)
Dodge Ram 1500-2500-3500 Pickup Truck 1999-2009 Workshop Repair & Service Manual (1.3 GB PDF, COMPLETE & INFORMATIVE for DIY REPAIR)

INSTANT DOWNLOAD


Dodge Ram 1500-2500-3500 Pickup Truck 1999-2009 Workshop Repair & Service Manual (1.3 GB PDF, COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Dodge Ram 1500-2500-3500 Pickup Truck (incl. SRT-10 & DIESEL) 1999-2009 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
LANGUAGE: English
SIZE/PAGE: 1,300 MB
OS: Windows/Mac OS X/Linux/Android/iOS

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Dodge Ram 1500-2500-3500 Pickup Truck 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009. All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

GROUP TAB LOCATOR
Introduction
0 Lubrication & Maintenance
2 Suspension
3 Differential & Driveline
4 Vehicle Quick Reference
5 Brakes
6 Clutch
7 Cooling
8A Audio/Video
8B Chime/Buzzer
8E Electronic Control Modules
8F Engine Systems
8G Heated Systems
8H Horn
8I Ignition Control
8J Instrument Cluster
8L Lamps
8M Message Systems
8N Power Systems
😯 Restraints
8P Speed Control
8Q Vehicle Theft Security
8R Wipers/Washers
8T Navigation/Telecommunication
8W Wiring
9 Engine
11 Exhaust System
13 Frame & Bumpers
14 Fuel System
19 Steering
21 Transmission and Transfer Case
22 Tires/Wheels
23 Body
24 Heating & Air Conditioning
25 Emissions Control
Component and System Index
DTC Index
Service Manual Comment Forms (Rear of Manual)

BATTERY SYSTEM
DESCRIPTION
GASOLINE ENGINE
Vehicles with a gasoline engine are equipped with a single 12-volt battery. All of the components of the battery system are located within the engine compartment.
The battery system for this vehicle, covers the following related components:
*). Battery (2) – The storage battery provides a reliable means of storing a renewable source of electrical energy within the vehicle.
*). Positive Battery cable (1) – The positive battery cable connects the battery positive terminal post to the vehicle electrical system, starter and alternator.
*). Negative Battery Cable (3) – The negative battery cable connects the battery negative terminal post to the vehicle electrical system through body, chassis and engine grounding points.
*). Battery Thermal Guard (5) – A thermal guard wraps around the battery case to enclose the sides of the battery. The thermal guard consists of a heavy black plastic outer skin and two lighter plies of plastic that have been formed into a sheet with hundreds of small air pockets entrapped between them.
*). Battery Holddown – The battery holddown hardware secures the battery in the battery tray in the engine compartment.
*). Battery Tray – The battery tray provides a secure mounting location in the vehicle for the battery and an anchor point for the battery holddown hardware.
DIESEL ENGINE
Vehicles with a diesel engine utilize two 12-volt batteries connected in parallel. All of the components of the battery system are located within the engine compartment. The battery system for this vehicle, covers the following related components:
*). Left Battery (3) – The Left storage battery provides a reliable means of storing a renewable source of electrical energy within the vehicle.
*). Right Battery (5) – The Right storage battery provides a reliable means of storing a renewable source of electrical energy within the vehicle as well as the additional required electrical energy due to high demands of the diesel system.
*). Positive Battery cables (2 & 6) – The positive battery cables connect the battery positive terminal
posts to the vehicle electrical system, starter and alternator as well as connecting the two batteries together.
*). Negative Battery Cables (1 & 4) – The negative battery cables connect the battery negative terminal posts to the vehicle electrical system through body, chassis and engine grounding points.
*). Battery Thermal Guard – A thermal guard wraps around the battery case to enclose the sides of the battery. The thermal guard consists of a heavy black plastic outer skin and two lighter plies of plastic that have been formed into a sheet with hundreds of small air pockets entrapped between them.

DIFFERENTIAL CASE BEARING PRELOAD AND GEAR BACKLASH
Backlash is adjusted by moving the adjusters in and out or both. By moving the adjusters the case/ring gear will move closer or further away from the pinion.
In most cases this adjustment can be used to achieve the correct gear tooth pattern and set the case bearing
preload.
1. Remove adjuster lock bolts (3) and adjuster locks (2).
2. Loosen the differential bearing cap bolts (4).
3. Slide differential case (1) toward the pinion gear until the gears make contact/zero backlash. If zero backlash cannot be obtained, turn the pinion side adjuster until zero backlash is obtained.
4. Holding the differential case (2) toward the pinion gear, turn bearing adjusters with Adjuster Wrench 8883 (1) until they make contact with the differential bearings/cups.
5. Back off the ring gear side adjuster 4 holes, to obtain initial ring gear backlash.
6. Install ring gear side adjuster lock and bolt. Do not tighten adjuster lock bolt at this time.
7. Tighten pinion gear side adjuster firmly against the differential case bearing cup.
8. Rotate the pinion several times to seat the deferential bearings.
9. Loosen pinion gear side adjuster until it is no longer in contact with the bearing cup, then tighten it until it makes contact.
10. Tighten pinion gear side adjuster an additional:
*). New Bearings: 6 Adjuster Holes
*). Original Bearings: 4 Adjuster Holes
11. Install pinion gear side adjuster lock and bolt.
12. Tighten bearing cap bolts to 165 N·m (122 ft. lbs.).
13. Tighten adjuster lock bolts to 25 N·m (18 ft. lbs.).
14. Measure ring gear (2) backlash with a Dial Indicator C-3339 (1) and Pilot Stud L-4438 at eight points around the drive side of the ring gear. The backlash should be 0.08-0.25 mm (0.003-0.010 in) with a preferred backlash of 0.13-0.18 mm (0.005-0.007 in).


INSTANT DOWNLOAD


Posted on

Dodge Nitro 2006-2011 Workshop Repair & Service Manual (4,048 Pages, COMPLETE & INFORMATIVE for DIY REPAIR)

Dodge Nitro 2006-2011
Dodge Nitro 2006-2011

MDGNTR0611NPES.PDF
Price: $9.99 USD

Dodge Nitro 2006-2011 Workshop Repair & Service Manual (4,048 Pages, COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Dodge KA Nitro R/T 2006 2007 2008 2009 2010 2011 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
LANGUAGE: English
SIZE/PAGE: 4,048 Pages
OS: Windows/Mac OS X/Linux/Android/iOS

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Dodge Nitro 2006-2011. All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

├── 3.7L Engine.pdf
├── 4.0L Engine.pdf
├── ABS Electrical.pdf
├── ABS Service.pdf
├── Airbags.pdf
├── Audio Video Electrical.pdf
├── Audio Video.pdf
├── Auto Trans 42RLE Assembly.pdf
├── Auto Trans 42RLE Diagnostic.pdf
├── Auto Trans 42RLE Fluid and Filter.pdf
├── Auto Trans 42RLE Installation.pdf
├── Auto Trans 42RLE Removal.pdf
├── Auto Trans Nag1 Diagnostic and Testing.pdf
├── Auto Trans Nag1 Dissasembly.pdf
├── Auto Trans Nag1 Fluid and Filter.pdf
├── Auto Trans Nag1 Instalation.pdf
├── Auto Trans Nag1 Removal.pdf
├── Auto Trans Nag1 Shifter Diagnosis.pdf
├── Auto Trans Nag1 Torque Converter.pdf
├── Base Service.pdf
├── Body.pdf
├── Clutch.pdf
├── Cooling.pdf
├── Cruise Control.pdf
├── Defogger.pdf
├── Differential and Driveline.pdf
├── Exhaust and Turbo.pdf
├── Exterior Lights Electrical.pdf
├── Exterior Lights.pdf
├── Fuel.pdf
├── HVAC.pdf
├── Heated Mirrors.pdf
├── Hvac Electrical.pdf
├── Ignition Control Electrical.pdf
├── Ignition Control.pdf
├── Instrument Cluster.pdf
├── Manual Trans.pdf
├── Navigation.pdf
├── Overhead Console.pdf
├── Power Locks Electrical.pdf
├── Power Locks.pdf
├── Power Mirrors.pdf
├── Power Seats.pdf
├── Starter.pdf
├── Steering System.pdf
├── Suspension.pdf
├── Transfer Case MP140.pdf
├── Transfer Case MP143.pdf
├── Wiper Washer.pdf
└── Wiring.pdf

EXCERPTS:
HEADLAMPS
The headlamp system includes the SCM, the EMIC, the TIPM, and the left (lighting) multi-function switch on the steering column. The headlamp bulbs have a path to ground at all times through their connection to the engine compartment wire harness. The engine compartment harness has takeouts with eyelet terminals that are secured by nuts to ground studs on the front end sheet metal within the engine compartment. The TIPM will store a Diagnostic Trouble Code (DTC) for any shorts or opens in the headlamp circuits.
The SCM monitors a hard wired multiplex input to determine the status of the left multi-function switch and whether the headlamp high or low beams are selected. The SCM then sends the appropriate electronic headlamp switch and headlamp beam select switch status messages to the EMIC over the LIN data bus. The
EMIC then sends the appropriate electronic headlamp request and headlamp beam request messages to the
TIPM over the CAN data bus. The TIPM responds to these messages by providing a pulse width modulated voltage output to the headlamps through high side drivers on the right and left low and high beam feed circuits to illuminate the selected headlamp filaments. The TIPM also sends the appropriate electronic messages to the EMIC to control the illumination of the high beam indicator. When the optical horn feature is selected, the low beams will shut OFF about 200 milliseconds after the high beams are activated.
The TIPM also remembers which beams (LOW or HIGH) were selected when the headlamps were last turned
OFF, and energizes those beams again the next time the headlamps are turned ON. The TIPM provides a battery saver (load shedding) feature for the headlamps, which will turn these lamps OFF if they are left ON for more than about eight minutes with the ignition switch in the LOCK position. The SCM and the EMIC each provide a
fail-safe feature for the headlamps, which will cause the TIPM to turn the low beam headlamps ON automatically if there is no input available from the left multi-function switch. The TIPM also provides a failsafe feature for the headlamps that will turn the headlamps ON automatically whenever a loss of CAN bus communication is detected with the ignition switch in the ON position.
Each headlamp includes an integral reflector adjustment screw (domestic markets) or screws (export markets) to be used for static aiming of the headlamps.

WATER DRAINAGE AND WIND NOISE DIAGNOSIS
Adequate drainage is provided by a drain trough in the sunroof housing which encircles the sliding glass panel and leads to drain hoses. If a wet headliner or other water leak complaints are encountered, before performing any adjustments, first ensure that the drainage system is not plugged or disconnected. Use a pint container to pour water into the sunroof housing drain trough. If water flow is restricted, use compressed air to blow out any material plugging the drain system. Retest system again.
To further check for a disconnected drain hose:
1. Lower headliner as necessary to gain access to sunroof housing drain tubes. See REMOVAL.
2. Repair as necessary.
3. Install headliner. See INSTALLATION.
The sliding glass panel is designed to seal water entry with a snug fit between the roof and the seal. The fit can be checked by inserting a piece of paper between the roof and the seal. The piece of paper should have some resistance when pulled out when the glass panel is in the closed position. The sunroof housing will drain off a minimum amount of water. Excessive wind noise could result if the gap clearances are exceeded. The sunroof glass panel may need to be adjusted. See ADJUSTMENTS for proper procedures.
DEFLECTOR – SUNROOF WIND
REMOVAL
DEFLECTOR – SUNROOF WIND


MDGNTR0611NPES.PDF
Price: $9.99 USD