Author: admin

INSTANT DOWNLOAD (add to cart)

Subaru Tribeca 2006-2014 Workshop Repair & Service Manual
Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 2006-2014 Subaru B9 Tribeca, Tribeca, Tribeca Limited, Tribeca Premium, Tribeca Touring. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 2006-2014 Subaru B9 Tribeca, Tribeca, Tribeca Limited, Tribeca Premium, Tribeca Touring is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
AT Main Case – AUTOMATIC TRANSMISSION
34.AT Main Case
A: REMOVAL
1) Remove the transmission assembly from vehicle body.
2) Pull out the torque converter assembly.
3) Remove the transmission harness connector from stay.
4) Disconnect the air breather hose.
5) Remove the oil charge pipe.
6) Remove the ATF filter inlet and outlet pipes.
7) Remove the extension case.
8) Remove the center differential carrier.
9) Remove the reduction driven gear.
10) Separate the converter case from the transmission case.
11) Remove the control valve body.
12) Remove the oil pump cover.
NOTE: The input clutch pack assembly and front sun gear assembly are also removed together.
13) Remove the needle bearing of the middle carrier assembly.
14) Remove the middle carrier assembly.
15) Remove the rear carrier assembly.
16) Remove the middle & rear sun gear assembly.
17) Remove the thrust needle bearing of high & low reverse clutch.
18) Remove the high & low reverse clutch assembly.
19) Remove the direct clutch assembly.
20) Remove the snap ring of reverse brake.
21) Remove the retaining plate.
22) Remove the leaf spring.
23) Take out the drive plate, driven plate and dish plate.
24) Remove the snap ring of the reverse brake spring retainer.
25) Remove the spring retainer.
26) Remove the return spring.
27) Apply compressed air.
28) Remove the reverse brake piston.
B: INSTALLATION
1) Install the reverse brake piston.
2) Install the return spring.
…

INSTANT DOWNLOAD (add to cart)

Subaru Alcyone SVX 1991-1997 Factory Service & Shop Manual
Complete workshop & service manual with electrical wiring diagrams for Subaru Alcyone SVX 1991-1997. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Subaru Alcyone SVX 1991-1997 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

FILELIST: (1.7 G PDF)
SUBARU SVX 1992 SERVICE MANUAL.pdf
SUBARU SVX 1993 SERVICE MANUAL.pdf
SUBARU SVX 1994 SERVICE MANUAL.pdf
SUBARU SVX 1995 SERVICE MANUAL.pdf
SUBARU SVX 1996 SERVICE MANUAL.pdf
SUBARU SVX 1997 SERVICE MANUAL.pdf

EXCERPT:
2-7 [WSAO] SERVICE PROCEDURE
5. Collector Chamber and Intake
Manifold Assembly
A: REMOVAL
1) Release fuel pressure.
2) Remove collector cover.
3) Disconnect cruise control cable CD.
4) Disconnect accelerator cable®.
5) Loosen clamps which connect air intake duct to throttle body and mass air flow sensor.
6) Remove air intake duct.
7) Slide connector cover out from mass air flow sensor connector.
8) Disconnect connector from mass air flow sensor.
9) Remove clips on air cleaner upper cover.
10) Remove air cleaner element.
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Subaru Sambar Truck & Van 1990-2012. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Subaru Sambar Truck & Van 1990-2012 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

FILELIST:
00 – Table of Contents.pdf
01 – Vehicle Identification.pdf
02 – General Maintenance.pdf
03 – Suspension.pdf
04 – Steering.pdf
05 – Brake System.pdf
06 – Cooling System.pdf
07 – Intake Fuel Exhaust Systems.pdf
08 – Starting Charging Systems.pdf
09 – Engine Transmission Removal.pdf
10 – Engine Overhaul.pdf
11 – Transmission.pdf
12 – Wiring Diagrams.pdf
…

EXCERPT:
Subaru Sambar 660cc Truck & Van Factory Service Manual 1990-2006 (1990-2012 applicable)
V-KS3, V-KS4, V-KVS, V-KV4 2WD & 4WD AT-MT Models
Subaru Kei T11 Vehicles Series
Chapter 6
Engine Coolant & Cooling System
10. Coolant System Specifications and Capacities
11. Coolant System Components Diagram
12. Coolant System Radiator Components Diagrams
13. Engine Room Fan System
14. Troubleshooting Chart
15. Coolant Line Diagrams (Chassis Mount)
16. Water Pump
17. Engine Room Fan Circuit
18. Cooling Master Control Unit & Circuit
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Subaru Leone/Loyale/DL/GL 1979-1994. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Subaru Leone/Loyale/DL/GL 1979-1994 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
ENGINE LUBRICATION SYSTEM
(2) When ignition switch is turned ON, current flows through gauge section and heat wire of sender section. Because of low. point contact pressure, heat generated by low current allows bimetal to bend so that contact points open.
(3) Contact points (on sender side) open rapidly. Since temperature of bimetal (on gauge side) does not increase, bimetal hardly bends and the pointer does not move.
…

INSTANT DOWNLOAD (add to cart)

Subaru Legacy/Outback 1989-2017 Workshop Repair & Service Manual
Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1989-2017 Subaru Legacy, Liberty, Legacy Outback, Outback, Legacy Alpine, Legacy Brighton, Legacy GT, Legacy GT Limited, Legacy GT spec.B, Legacy GT Premium, Legacy i, Legacy L, Legacy LE, Legacy LS, Legacy LSi, Legacy Limited, Legacy Premium, Legacy R, Legacy R Limited, Legacy R Premium, Legacy SUS, Legacy SUS Limited, Legacy Sport, Legacy Touring, Legacy 2.5i, Legacy 2.5i Limited, Legacy 2.5i Premium, Legacy 2.5i Sport, Legacy 3.6R Limited, Legacy Outback Limited, Outback i, Outback L.L. Bean Edition, Outback Limited, Outback Premium, Outback R, Outback R Limited, Outback R Premium, Outback R L.L. Bean Edition, Outback R VDC Limited, Outback VDC, Outback XT, Outback XT Limited, Outback 2.5i, Outback 2.5i Limited, Outback 2.5i Premium, Outback 3.6R Limited. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Subaru Legacy/Outback 1989-2017 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

MAKE: Subaru
MODEL: Legacy, Liberty, Legacy Outback, Outback (Legacy Alpine, Legacy Brighton, Legacy GT, Legacy GT Limited, Legacy GT spec.B, Legacy GT Premium, Legacy i, Legacy L, Legacy LE, Legacy LS, Legacy LSi, Legacy Limited, Legacy Premium, Legacy R, Legacy R Limited, Legacy R Premium, Legacy SUS, Legacy SUS Limited, Legacy Sport, Legacy Touring, Legacy 2.5i, Legacy 2.5i Limited, Legacy 2.5i Premium, Legacy 2.5i Sport, Legacy 3.6R Limited, Legacy Outback Limited, Outback i, Outback L.L. Bean Edition, Outback Limited, Outback Premium, Outback R, Outback R Limited, Outback R Premium, Outback R L.L. Bean Edition, Outback R VDC Limited, Outback VDC, Outback XT, Outback XT Limited, Outback 2.5i, Outback 2.5i Limited, Outback 2.5i Premium, Outback 3.6R Limited)
YEAR: 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
FORMAT: PDF

FILELIST: (6.3 GB PDF)
1995 LEGACY SERVICE MANUAL
1996 LEGACY SERVICE MANUAL
1997 LEGACY SERVICE MANUAL
1999 LEGACY SERVICE MANUAL
2000 LEGACY SERVICE MANUAL
2004 LEGACY SERVICE MANUAL
2012 LEGACY SERVICE MANUAL
2015 LEGACY SERVICE MANUAL
BONUS_MATERIALS
1992 LIBERTY SERVICE MANUAL SUPPLEMENT.pdf
1992 LIBERTY SERVICE MANUAL.pdf
1995 LEGACY SERVICE MANUAL.pdf
1996 LEGACY SERVICE MANUAL.pdf
1997 LEGACY SERVICE MANUAL.pdf
1998 LEGACY SERVICE MANUAL.pdf
1998-2003 LIBERTY SERVICE MANUAL.pdf
1999 LEGACY SERVICE MANUAL.pdf
2000 LEGACY SERVICE MANUAL.pdf
2001 LEGACY FACTORY SERVICE MANUAL.pdf
2001 LEGACY SERVICE MANUAL.pdf
2002 LEGACY FACTORY SERVICE MANUAL.pdf
2002 LEGACY SERVICE MANUAL.pdf
2003 LEGACY FACTORY SERVICE MANUAL.pdf
2003 LEGACY SERVICE MANUAL.pdf
2003 LIBERTY SERVICE MANUAL.pdf
2004 LEGACY FACTORY SERVICE MANUAL.pdf
2004 LEGACY SERVICE MANUAL.pdf
2005 BODY REPAIR MANUAL.pdf
2005 LEGACY FACTORY SERVICE MANUAL.pdf
2005 LEGACY SERVICE MANUAL.pdf
2006 LEGACY SERVICE MANUAL.pdf
2007 BODY REPAIR MANUAL.pdf
2007 LEGACY SERVICE MANUAL.pdf
2008 LEGACY FACTORY SERVICE MANUAL.pdf
2008 LEGACY SERVICE MANUAL.pdf
2009 BODY REPAIR MANUAL.pdf
2009 LEGACY FACTORY SERVICE MANUAL.pdf
2009 LEGACY SERVICE MANUAL.pdf
2010 BODY REPAIR MANUAL.pdf
2010 LEGACY SERVICE MANUAL.pdf
2011 LEGACY SERVICE MANUAL.pdf
2012 LEGACY FACTORY SERVICE MANUAL.pdf
2012 LEGACY SERVICE MANUAL.pdf
2013 LEGACY SERVICE MANUAL.pdf
2014 BODY REPAIR MANUAL.pdf
2014 LEGACY SERVICE MANUAL.pdf
2015 BODY REPAIR MANUAL.pdf
2015 LEGACY SERVICE MANUAL.pdf
2016 LEGACY SERVICE MANUAL.pdf
2017 LEGACY_OUTBACK SERVICE MANUAL.pdf
Model application.txt
…

EXCERPT:
Fuel Sub Level Sensor – FUEL INJECTION (FUEL SYSTEMS)

29.Fuel Sub Level Sensor
A: REMOVAL WARNING:
Place “NO OPEN FLAMES” signs near the working area.
CAUTION:
• Be careful not to spill fuel.
• If the fuel gauge indicates that two thirds or more of the fuel is remaining, be sure to drain fuel before starting work to avoid the fuel to spill.
1) Release the fuel pressure.
2) Drain fuel.
3) Disconnect the ground cable from battery.
4) Remove the rear seat.
5) Remove the service hole cover.
(1) Remove bolt (A).
(2) Push the grommet (B) down and remove the service hole cover. sensor.
7) Disconnect the quick connector on the fuel delivery hose and jet pump hose.
8) Remove the nuts and bolts which install fuel sub level sensor on fuel tank.
9) Remove the fuel sub level sensor.

B: INSTALLATION
Install in the reverse order of removal while being careful of the following.
• Make sure the sealing portion is free from fuel or foreign matter before installation.
• Align protrusion (A) of the gasket to the position shown in the following figure.
• Align the protrusion (B) of fuel sub level sensor with the cutout on the upper plate of fuel sub level sensor.
• Tighten the nuts and bolts to the specified torque in the order as shown in the figure.
NOTE: Use a new gasket and retainer. Tightening torque: 4.4 N·m (0.4 kgf-m, 3.2 ft-lb)
…