1985-2005 Scania Trucks & Buses Repair & Service Manual (Multilingual, Detailed Installation Tutorial)
Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1985-2005 Scania Trucks & Buses. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.
This manual is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. You do not need to be skilled with a computer to use it.
Buy the Best Manual on the Internet from responsible merchant and get instant download without surprise.
INSTANT Delivery: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.
PRINTABLE with Diagrams: Just print the manual out and start to work. You can also use the manual with your laptop in your garage.
Customer SATISFACTION: If there is any problem, just drop a quick email. Within hours the issue shall be taken care of.
REFUND Policy: We sell high quality products only. In case there is any problem with your purchase, a replacement link will be sent to you. If we are at fault, you get 100% refund.
MAKE: Scania
YEAR: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
REGION: World-Wide
MODEL:
P-, G-, R-, T-Series Truck (2003-2015.10)
4 Series Truck (1994-2008)
3 Series Truck (1987-1996)
F-, K-, N-Series Bus (2004-2015.10)
4 Series Bus (1994-2010)
3 Series Bus (1987-1999)
E2011 (2010)
P96 (1996-2015.10)
FORMAT: 2 DVD ISO (8GB)
SCANIA WORKSHOP MANUALS + EPC
It contains information about parts, workshop operations, time required and necessary instructions, and this information is structured according to the specific needs of each user category. The system saves time on several fronts, which is of major benefit to the customer in the form of shorter standstill times.
EXCERPT:
Maintenance instructions for
group 1-3
F, K and N series
2-03 Hybrid bus
Procedures for all workshop operations on hybrid vehicles
Before all workshop operations
1. Switch off the 15 voltage.
2. Switch off the hybrid system using the hybrid system control switch in the roof panel.
3. Switch on the 15 voltage.
4. Connect SDP3. When starting SDP3 an automatic check is performed of the voltage
and the insulation monitor on the voltage class B circuit, and that the control switch is switched off. Fault code 793, The hybrid system interlock loop is open, is set when the control switch is switched off.
5. Switch off the 15 voltage.
6. Carry out the required workshop operation.
After all workshop operations
1. Start the hybrid system using the hybrid system control switch in the roof panel.
2. Start the vehicle and allow it to run for at least 10 seconds to activate the hybrid system.
3. Switch off the vehicle and switch on 15 voltage.
4. Check and clear any fault codes in SDP3.
Check for leaks and damage to electrical cables and connections
1. Open the hatches on the roof.
2. Check for leaks from the expansion tank coolant hoses and damage to cable harnesses and connections.
Check the coolant level
1. Open the hatch.
2. Remove the pressure caps.
3. Check the coolant level in both expansion tanks. Top up with coolant as necessary.