Pages from 1856995M1 – AGCO-Massey-Ferguson MF 185MB Baler & Accumulator Workshop Service Manual
Complete workshop & service manual with electrical wiring diagrams for AGCO/Massey-Ferguson MF 185MB Baler & Accumulator. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This AGCO/Massey-Ferguson MF 185MB Baler & Accumulator service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
1856995M1 – AGCO/Massey-Ferguson MF 185MB Baler & Accumulator Workshop Service Manual.pdf
EXCERPT:
Main Roller Bearing Replacement
The main rollers can be removed from the plunger through the side of the baler. Remove only one roller at a time, except when removing the plunger.
Removal
See the safety warnings at the beginning ofthis section and follow the procedures.
1 . Apply the flywheel brake.
2. Disconnect the implement drive line from the tractor.
3. Loosen the cap screws fo~ the shaft retainer.
If you are removinglhe rear roller assembly, loosen the bolt in the pusher plate. Move the shaft retainer out of the groove in the roller shaft and tighten the cap screws.
If you are removing the front roller assembly, loosen the jam nut on the pusher bolt and then loosen the bolt.
Move the shaft retainer out of the groove in the roller shaft and tighten the cap screws.
…