INSTANT DOWNLOAD (add to cart)
Complete workshop & service manual with electrical wiring diagrams for Caterpillar 247B, 247B2, 247B3, 257B, 257B2, 257B3 Multi Terrain Loaders. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This Caterpillar 247B, 247B2, 247B3, 257B, 257B2, 257B3 Multi Terrain Loaders service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
3,187 pages, bookmarked, Searchable, Printable, high quality PDF
FILELIST:
├── KENR8654 – Schematic (216B2, 226B2, 232B2, 236B2 , 242B2, & 252B2 Skid Steer Loader 247B2 & 257B2 Multi-Terrain Loader Electrical System)
│ ├── Collage.pdf
│ └── Main.pdf
├── KENR8818 – Specifications (247B2 & 257B2 Multi Terrain Loaders Machine Systems)
│ ├── Axle – Front.pdf
│ ├── Axle – Rear.pdf
│ ├── Bogie Wheel.pdf
│ ├── Control Manifold and Solenoid (Parking Brake).pdf
│ ├── Control Manifold and Solenoid (Work Tool Positioner).pdf
│ ├── Control Manifold (High Flow).pdf
│ ├── Control Manifold (Quick Coupler).pdf
│ ├── Control Valve (Work Tool).pdf
│ ├── Coupler Cylinder.pdf
│ ├── Engine Enclosure.pdf
│ ├── Gas Spring Group (Cab).pdf
│ ├── Gear Motor (Fan) – Demand.pdf
│ ├── Gear Motor (Fan).pdf
│ ├── Gear Pump – High Flow or Boost Flow.pdf
│ ├── Gear Pump.pdf
│ ├── Hydraulic Oil Filter.pdf
│ ├── Hydraulic Tank.pdf
│ ├── Idler Wheel 1.pdf
│ ├── Idler Wheel 2.pdf
│ ├── Lift Arm Cylinder and Mounting 1.pdf
│ ├── Lift Arm Cylinder and Mounting 2.pdf
│ ├── Lift Cylinder – Left Hand.pdf
│ ├── Lift Cylinder.pdf
│ ├── Lift Cylinder – Right Hand.pdf
│ ├── Machine Frame and Mounting 1.pdf
│ ├── Machine Frame and Mounting 2.pdf
│ ├── Pilot Operated Hydraulic Control 1.pdf
│ ├── Pilot Operated Hydraulic Control 2.pdf
│ ├── Pilot Operated Hydraulic Control – Hydrostatic 1.pdf
│ ├── Pilot Operated Hydraulic Control – Hydrostatic 2.pdf
│ ├── Pilot Operated Hydraulic Control – Hydrostatic.pdf
│ ├── Pilot Operated Hydraulic Control – Work Tool.pdf
│ ├── Piston Motor.pdf
│ ├── Piston Pump.pdf
│ ├── Pump Mounting (Hydrostatic).pdf
│ ├── Quick Coupler 1.pdf
│ ├── Quick Coupler 2.pdf
│ ├── Radiator and Hydraulic Oil Cooler (Fan).pdf
│ ├── Radiator and Hydraulic Oil Cooler.pdf
│ ├── Return Manifold.pdf
│ ├── ROPS Mounting.pdf
│ ├── Sprocket.pdf
│ ├── Tilt Cylinder – Left Hand.pdf
│ ├── Tilt Cylinder – Right Hand.pdf
│ ├── Track Drive – Left Hand.pdf
│ ├── Track Drive – Right Hand.pdf
│ ├── Track Tensioner.pdf
│ ├── Undercarriage – Left Hand.pdf
│ └── Undercarriage – Right Hand.pdf
├── KENR8819 – Systems Operation (247B2 and 257B2 Multi Terrain Loaders Machine Systems)
│ ├── Control Manifold and Solenoid (Work Tool Positioner) – If Equipped.pdf
│ ├── Control Valve (Work Tool).pdf
│ ├── General Information.pdf
│ ├── Governor Control.pdf
│ ├── Hydrostatic System.pdf
│ ├── Pilot Hydraulic System.pdf
│ ├── Pilot Valve (Joystick).pdf
│ ├── Piston Motor (Hydrostatic).pdf
│ ├── Piston Pump (Hydrostatic).pdf
│ ├── Undercarriage.pdf
│ └── Work Tool Hydraulic System.pdf
├── KENR8820 – Testing and Adjusting (247B2 and 257B2 Multi Terrain Loaders Machine Systems)
│ ├── Accumulator (Pilot) – Test and Charge.pdf
│ ├── Hydraulic Oil Contamination – Test.pdf
│ ├── Hydraulic System Troubleshooting.pdf
│ ├── Hydrostatic System – Flush and Fill.pdf
│ ├── Hydrostatic System – Test and Adjust.pdf
│ ├── Hydrostatic System Troubleshooting.pdf
│ ├── Line Relief Valve – Test and Adjust.pdf
│ ├── Machine Preparation.pdf
│ ├── Main Relief Valve – Test and Adjust.pdf
│ ├── Operational Checks.pdf
│ ├── Pilot System Pressure – Test.pdf
│ ├── Pump Flow – Test.pdf
│ ├── System Pressure – Release.pdf
│ ├── Visual Inspection.pdf
│ └── Worksheets – Troubleshoot.pdf
├── KENR9408 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3 Skid Steer Loader, Multi-terrain Loader, Compact Track Loader Hydraulic System)
│ ├── Collage.pdf
│ └── Main.pdf
├── RENR4873 – Disassembly and Assembly (247B and 257B Multi Terrain Loaders Engine Supplement)
│ ├── Air Cleaner – Remove and Install.pdf
│ ├── Alternator – Remove and Install.pdf
│ ├── Battery and Battery Cable – Separate and Connect.pdf
│ ├── Cab – Tilt.pdf
│ ├── Electric Starting Motor – Remove and Install.pdf
│ ├── Engine Enclosure – Remove and Install.pdf
│ ├── Engine – Install .pdf
│ ├── Engine – Remove .pdf
│ ├── Fuel Filter Group – Remove and Install.pdf
│ ├── Gear Motor (Fan) – Install.pdf
│ ├── Gear Motor (Fan) – Remove.pdf
│ ├── Hydraulic System Pressure – Release.pdf
│ ├── Muffler – Remove and Install.pdf
│ ├── Pump Mounting – Remove and Install.pdf
│ ├── Radiator and Hydraulic Oil Cooler – Install.pdf
│ ├── Radiator and Hydraulic Oil Cooler – Remove.pdf
│ ├── Water Pump – Remove and Install.pdf
│ └── Water Temperature Regulator – Remove and Install.pdf
├── RENR4874 – Disassembly and Assembly (247B, 247B2, 257B and 257B2 Multi Terrain Loaders Power Train)
│ ├── Axle (Front) – Remove and Install.pdf
│ ├── Axle (Rear) – Remove and Install.pdf
│ ├── Bogie Axle – Assemble.pdf
│ ├── Bogie Axle – Disassemble.pdf
│ ├── Bogie Axle – Install.pdf
│ ├── Bogie Axle – Remove.pdf
│ ├── Bogie Wheel – Install.pdf
│ ├── Bogie Wheel – Remove.pdf
│ ├── Control Manifold and Solenoid (Parking Brake) – Remove and Install.pdf
│ ├── Heavy Duty Dual Face Seal – Install.pdf
│ ├── Idler Axle – Assemble.pdf
│ ├── Idler Axle – Disassemble.pdf
│ ├── Idler Axle – Install.pdf
│ ├── Idler Axle – Remove.pdf
│ ├── Idler Wheel – Remove and Install.pdf
│ ├── Piston Motor (Hydrostatic) – Assemble.pdf
│ ├── Piston Motor (Hydrostatic) – Disassemble.pdf
│ ├── Piston Motor (Hydrostatic) – Install.pdf
│ ├── Piston Motor (Hydrostatic) – Remove.pdf
│ ├── Piston Pump (Hydrostatic) – Assemble.pdf
│ ├── Piston Pump (Hydrostatic) – Disassemble.pdf
│ ├── Piston Pump (Hydrostatic) – Install.pdf
│ ├── Piston Pump (Hydrostatic) – Remove.pdf
│ ├── System Pressure – Release – Hydraulic.pdf
│ ├── Track Drive – Assemble.pdf
│ ├── Track Drive – Disassemble.pdf
│ ├── Track Drive – Install.pdf
│ ├── Track Drive – Remove.pdf
│ ├── Track (Rubber) – Detension and Tension.pdf
│ ├── Track (Rubber) – Remove and Install.pdf
│ ├── Track Tensioner – Remove and Install.pdf
│ └── Undercarriage – Remove and Install.pdf
├── RENR4875 – Specifications (247B and 257B Multi Terrain Loaders Machine Systems)
│ ├── Axle – Front.pdf
│ ├── Axle – Rear.pdf
│ ├── Bogie Wheel.pdf
│ ├── Control Manifold and Solenoid (Parking Brake).pdf
│ ├── Control Manifold (Quick Coupler).pdf
│ ├── Control Valve (Work Tool).pdf
│ ├── Coupler Cylinder.pdf
│ ├── Engine Enclosure.pdf
│ ├── Gas Spring Group (Cab).pdf
│ ├── Gear Motor (Fan).pdf
│ ├── Gear Pump – High Flow or Boost Flow.pdf
│ ├── Gear Pump.pdf
│ ├── Hydraulic Oil Filter.pdf
│ ├── Hydraulic Tank.pdf
│ ├── Idler Wheel.pdf
│ ├── Lift Arm Cylinder and Mounting.pdf
│ ├── Lift Cylinder – Left Hand.pdf
│ ├── Lift Cylinder.pdf
│ ├── Lift Cylinder – Right Hand.pdf
│ ├── Machine Frame and Mounting.pdf
│ ├── Motor Mounting (Hydrostatic).pdf
│ ├── Pilot Operated Hydraulic Control – Hydrostatic.pdf
│ ├── Pilot Operated Hydraulic Control.pdf
│ ├── Pilot Operated Hydraulic Control – Work Tool.pdf
│ ├── Piston Motor.pdf
│ ├── Piston Pump.pdf
│ ├── Pump Mounting (Hydrostatic).pdf
│ ├── Quick Coupler.pdf
│ ├── Radiator and Hydraulic Oil Cooler (Fan).pdf
│ ├── Radiator and Hydraulic Oil Cooler.pdf
│ ├── Return Manifold.pdf
│ ├── ROPS Mounting .pdf
│ ├── Sprocket.pdf
│ ├── Tilt Cylinder – Left Hand.pdf
│ ├── Tilt Cylinder – Right Hand.pdf
│ ├── Track Drive – Left Hand.pdf
│ ├── Track Drive – Right Hand.pdf
│ ├── Track Tensioner.pdf
│ ├── Undercarriage – Left Hand.pdf
│ └── Undercarriage – Right Hand.pdf
├── RENR4876 – Systems Operation (247B and 257B Multi Terrain Loaders Machine Systems)
│ ├── Control Manifold and Solenoid (Work Tool Positioner) – If Equipped.pdf
│ ├── Control Valve (Work Tool).pdf
│ ├── General Information.pdf
│ ├── Governor Control.pdf
│ ├── Hydrostatic System.pdf
│ ├── Pilot Hydraulic System.pdf
│ ├── Pilot Valve (Joystick).pdf
│ ├── Piston Motor (Hydrostatic).pdf
│ ├── Piston Pump (Hydrostatic).pdf
│ ├── Undercarriage.pdf
│ └── Work Tool Hydraulic System.pdf
├── RENR4877 – Testing and Adjusting (247B and 257B Multi Terrain Loaders Machine Systems)
│ ├── Accumulator (Pilot) – Test and Charge.pdf
│ ├── Hydraulic Oil Contamination – Test.pdf
│ ├── Hydraulic System Troubleshooting.pdf
│ ├── Hydrostatic System – Flush and Fill.pdf
│ ├── Hydrostatic System – Test and Adjust.pdf
│ ├── Hydrostatic System Troubleshooting.pdf
│ ├── Line Relief Valve – Test and Adjust.pdf
│ ├── Machine Preparation.pdf
│ ├── Main Relief Valve – Test and Adjust.pdf
│ ├── Operational Checks.pdf
│ ├── Pilot System Pressure – Test.pdf
│ ├── Pump Flow – Test.pdf
│ ├── System Pressure – Release.pdf
│ ├── Visual Inspection.pdf
│ └── Worksheets – Troubleshoot.pdf
├── RENR4878 – Disassembly and Assembly (247B, 247B2, 257B and 257B2 Multi Terrain Loaders Machine Systems)
│ ├── Accumulator – Remove and Install.pdf
│ ├── Air Conditioner and Heater – Assemble.pdf
│ ├── Air Conditioner and Heater – Disassemble.pdf
│ ├── Air Conditioner and Heater – Install.pdf
│ ├── Air Conditioner and Heater – Remove.pdf
│ ├── Cab – Install.pdf
│ ├── Cab – Remove.pdf
│ ├── Cab – Tilt.pdf
│ ├── Control Valve (Work Tool) – Assemble.pdf
│ ├── Control Valve (Work Tool) – Disassemble.pdf
│ ├── Control Valve (Work Tool) – Install.pdf
│ ├── Control Valve (Work Tool) – Remove.pdf
│ ├── Coupler Cylinder – Remove and Install.pdf
│ ├── Disconnecting Snap To Connect Fittings.pdf
│ ├── Diverter Valve – Install.pdf
│ ├── Diverter Valve – Remove.pdf
│ ├── Gas Spring – Remove and Install.pdf
│ ├── Gear Motor – Assemble.pdf
│ ├── Gear Motor – Disassemble.pdf
│ ├── Gear Motor – Install.pdf
│ ├── Gear Motor – Remove.pdf
│ ├── Gear Pump – Assemble.pdf
│ ├── Gear Pump – Disassemble.pdf
│ ├── Gear Pump – Install.pdf
│ ├── Gear Pump – Remove.pdf
│ ├── Hydraulic System Pressure – Release.pdf
│ ├── Hydraulic Tank – Install.pdf
│ ├── Hydraulic Tank – Remove.pdf
│ ├── Lift Arms – Install.pdf
│ ├── Lift Arms – Remove.pdf
│ ├── Lift Cylinder – Install.pdf
│ ├── Lift Cylinder – Remove.pdf
│ ├── Pilot Operated Hydraulic Control – Assemble.pdf
│ ├── Pilot Operated Hydraulic Control – Disassemble.pdf
│ ├── Pilot Operated Hydraulic Control – Install.pdf
│ ├── Pilot Operated Hydraulic Control – Remove.pdf
│ ├── Quick Coupler – Remove and Install.pdf
│ ├── Refrigerant Accumulator – Remove and Install.pdf
│ ├── Refrigerant Compressor and Support Housing – Remove and Install.pdf
│ ├── Refrigerant Condenser and Mounting – Remove and Install.pdf
│ ├── Seat – Remove and Install.pdf
│ ├── Solenoid Valve and Mounting (Coupler) – Remove and Install.pdf
│ ├── Solenoid Valve (Compressor Motor) – Remove and Install.pdf
│ ├── Tilt Cylinder – Install.pdf
│ ├── Tilt Cylinder – Remove.pdf
│ └── Window Wiper Motor – Remove and Install.pdf
├── RENR4889 – Schematic (247B, 247B2, 257B, 257B2, 267B, 277B, 287B Multi Terrain Loaders Hydraulic System)
│ ├── Collage.pdf
│ └── Main.pdf
├── RENR6417 – Systems Operation (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
│ ├── Diagnostic Operation.pdf
│ ├── Electronic Control Module (ECM).pdf
│ ├── Engine Start Interlock.pdf
│ ├── General Information.pdf
│ ├── Hydrostatic System Interlock and Parking Brake Interlock.pdf
│ ├── Indicators.pdf
│ ├── Normal Operation.pdf
│ ├── Related Components.pdf
│ ├── Relays.pdf
│ ├── Solenoid Valve.pdf
│ ├── Switches.pdf
│ └── Work Tool Interlock.pdf
├── RENR6417 – Testing & Adjusting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
│ ├── Electronic Control Module (ECM) – Replace.pdf
│ ├── Glossary of Electrical Terms.pdf
│ └── System Schematic.pdf
├── RENR6417 – Troubleshooting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
│ ├── Armrest Indicator Is Flashing.pdf
│ ├── Charging System.pdf
│ ├── Electrical Component and Connector Locations.pdf
│ ├── Electrical System.pdf
│ ├── Engine Does Not Crank.pdf
│ ├── General Information.pdf
│ ├── Initial Troubleshooting Procedure.pdf
│ ├── Parking Brake Indicator and Armrest Indicator Are Flashing.pdf
│ ├── Parking Brake Indicator and Armrest Indicator Do Not Function Correctly.pdf
│ ├── Parking Brake Indicator Is Flashing.pdf
│ ├── Parking Brake Intermittent.pdf
│ ├── Service Tools.pdf
│ ├── Solenoid Valve (Parking Brake) Does Not Function Correctly.pdf
│ ├── Switch (Hydraulic Lockout).pdf
│ ├── Switch (Parking Brake).pdf
│ └── Work Tool Does Not Function.pdf
├── RENR6418 – Systems Operation (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
│ ├── Cat Data Link.pdf
│ ├── Electronic Control Module (ECM).pdf
│ ├── General Information.pdf
│ ├── Indicators.pdf
│ ├── Normal Operation.pdf
│ ├── Related Components.pdf
│ ├── Sensors.pdf
│ ├── Solenoid Valves.pdf
│ └── Switches.pdf
├── RENR6418 – Testing & Adjusting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
│ ├── Electrical Connector – Inspect.pdf
│ ├── Electronic Control Module (ECM) – Flash Program.pdf
│ ├── Electronic Control Module (ECM) – Replace.pdf
│ ├── Glossary of Electrical Terms.pdf
│ ├── System Schematic.pdf
│ ├── Wiring Harness (Open Circuit) – Test.pdf
│ └── Wiring Harness (Short Circuit) – Test.pdf
├── RENR6418 – Troubleshooting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
│ ├── Auxiliary Hydraulic Does Not Function in Either Direction.pdf
│ ├── Auxiliary Hydraulic Does Not Function in One Direction.pdf
│ ├── Diagnostic Capabilities.pdf
│ ├── Diagnostic Code List.pdf
│ ├── Electrical Component and Connector Locations.pdf
│ ├── General Information.pdf
│ ├── High Flow Does Not Function in Either Direction.pdf
│ ├── High Flow Does Not Function in One Direction.pdf
│ ├── Power Supply Circuit of Electronic Control Module.pdf
│ ├── Service Tools.pdf
│ ├── Switch (Armrest) and Switch (Seat).pdf
│ ├── Switch (Continuous Flow).pdf
│ ├── Switch (Hydraulic Lockout).pdf
│ ├── Switch (Interlock Override).pdf
│ ├── Switch (Parking Brake).pdf
│ ├── Switch (Two Speed).pdf
│ └── Using Caterpillar Electronic Technician to Determine Diagnostic Codes.pdf
├── RENR6419 – Schematic (216B, 216B2, 226B, 226B2, 232B, 232B2, 236B, 236B2, 242B, 242B2, 246B, 248B, 252B, 252B2, 262B, 268B & 247B, 247B2, 257B, 257B2, 267B, 277B, 287B Loaders Electrical System)
│ ├── Collage.pdf
│ └── Main.pdf
├── RENR8751 – Schematic (247B, 247B2, 257B, 257B2, 267B, 277B, and 287B Multi-Terrain Loader Hydraulic System)
│ ├── Collage.pdf
│ └── Main.pdf
├── RENR8752 – Schematic (257B Multi Terrain Loader Hydraulic System)
│ ├── Collage.pdf
│ └── Main.pdf
├── RENR8753 – Schematic (257B Multi Terrain Loader Hydraulic System)
│ ├── Collage.pdf
│ └── Main.pdf
├── UENR0251 – Disassembly & Assembly (259B3 Compact Track Loader & 247B3, 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loaders Power Train)
│ ├── Axle – Assemble – Heavy Duty.pdf
│ ├── Axle – Assemble.pdf
│ ├── Axle – Disassemble – Heavy Duty.pdf
│ ├── Axle – Disassemble.pdf
│ ├── Axle (Front) – Remove and Install.pdf
│ ├── Axle – Install.pdf
│ ├── Axle (Rear) – Remove and Install.pdf
│ ├── Axle – Remove .pdf
│ ├── Bogie Axle – Assemble.pdf
│ ├── Bogie Axle – Disassemble.pdf
│ ├── Bogie Axle – Install.pdf
│ ├── Bogie Axle – Remove.pdf
│ ├── Bogie Wheel – Install.pdf
│ ├── Bogie Wheel – Remove.pdf
│ ├── Chain (Drive) – Install.pdf
│ ├── Chain (Drive) – Remove.pdf
│ ├── Chain (Drive) Tension – Adjust.pdf
│ ├── Control Manifold and Solenoid (Parking Brake) – Remove and Install.pdf
│ ├── Heavy Duty Dual Face Seal – Install.pdf
│ ├── Idler – Assemble – Front.pdf
│ ├── Idler – Assemble – Rear.pdf
│ ├── Idler Axle – Assemble.pdf
│ ├── Idler Axle – Disassemble.pdf
│ ├── Idler Axle – Install.pdf
│ ├── Idler Axle – Remove.pdf
│ ├── Idler – Disassemble – Front.pdf
│ ├── Idler – Disassemble – Rear.pdf
│ ├── Idler – Install – Front.pdf
│ ├── Idler – Install – Rear.pdf
│ ├── Idler – Remove – Front.pdf
│ ├── Idler – Remove – Rear.pdf
│ ├── Idler Wheel – Remove and Install.pdf
│ ├── Piston Motor (Hydrostatic) – Assemble – CTL.pdf
│ ├── Piston Motor (Hydrostatic) – Assemble – Final Drive Bench Method.pdf
│ ├── Piston Motor (Hydrostatic) – Assemble.pdf
│ ├── Piston Motor (Hydrostatic) – Assemble – Two Speed.pdf
│ ├── Piston Motor (Hydrostatic) – Disassemble – CTL.pdf
│ ├── Piston Motor (Hydrostatic) – Disassemble – Final Drive Bench Method.pdf
│ ├── Piston Motor (Hydrostatic) – Disassemble.pdf
│ ├── Piston Motor (Hydrostatic) – Disassemble – Two Speed.pdf
│ ├── Piston Motor (Hydrostatic) – Install.pdf
│ ├── Piston Motor (Hydrostatic) – Remove.pdf
│ ├── Piston Pump (Hydrostatic) – Assemble.pdf
│ ├── Piston Pump (Hydrostatic) – Disassemble.pdf
│ ├── Piston Pump (Hydrostatic) – Install.pdf
│ ├── Piston Pump (Hydrostatic) – Remove.pdf
│ ├── Recoil Spring and Track Adjuster – Install.pdf
│ ├── Recoil Spring and Track Adjuster – Remove.pdf
│ ├── Recoil Spring – Assemble.pdf
│ ├── Recoil Spring – Disassemble.pdf
│ ├── Solenoid Valve and Mounting (Parking Brake) – Remove and Install – Two Speed.pdf
│ ├── Sprocket – Remove and Install.pdf
│ ├── System Pressure – Release – Hydraulic.pdf
│ ├── Tire and Rim – Remove and Install.pdf
│ ├── Track – Detension and Tension.pdf
│ ├── Track Drive – Assemble.pdf
│ ├── Track Drive – Disassemble.pdf
│ ├── Track Drive – Install.pdf
│ ├── Track Drive – Remove.pdf
│ ├── Track – Remove and Install.pdf
│ ├── Track Roller – Remove and Install.pdf
│ ├── Track (Rubber) – Detension and Tension.pdf
│ ├── Track (Rubber) – Remove and Install.pdf
│ ├── Track Tensioner – Remove and Install.pdf
│ ├── Undercarriage – Install.pdf
│ ├── Undercarriage – Remove and Install.pdf
│ └── Undercarriage – Remove.pdf
├── UENR0252 – Disassembly & Assembly (259B3 Compact Track Loader & 247B3, 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Systems)
│ ├── Accumulator – Remove and Install.pdf
│ ├── Air Conditioner and Heater – Assemble.pdf
│ ├── Air Conditioner and Heater – Disassemble.pdf
│ ├── Air Conditioner and Heater – Install.pdf
│ ├── Air Conditioner and Heater – Remove.pdf
│ ├── Cab – Install.pdf
│ ├── Cab – Remove.pdf
│ ├── Cab – Tilt.pdf
│ ├── Control Valve (Work Tool) – Assemble.pdf
│ ├── Control Valve (Work Tool) – Disassemble.pdf
│ ├── Control Valve (Work Tool) – Install.pdf
│ ├── Control Valve (Work Tool) – Remove.pdf
│ ├── Coupler Cylinder – Remove and Install.pdf
│ ├── Diverter Valve – Remove and Install.pdf
│ ├── Gas Spring – Remove and Install – Extended Reach.pdf
│ ├── Gear Motor – Assemble.pdf
│ ├── Gear Motor – Disassemble.pdf
│ ├── Gear Motor – Install.pdf
│ ├── Gear Motor – Remove.pdf
│ ├── Gear Pump – Assemble – High Flow.pdf
│ ├── Gear Pump – Assemble.pdf
│ ├── Gear Pump – Disassemble – High Flow.pdf
│ ├── Gear Pump (Implement and Charge) – Assemble.pdf
│ ├── Gear Pump (Implement and Charge) – Disassemble.pdf
│ ├── Gear Pump – Install.pdf
│ ├── Gear Pump – Remove.pdf
│ ├── Hydraulic Tank – Install.pdf
│ ├── Hydraulic Tank – Remove.pdf
│ ├── Lift Arms – Install – Extended Reach Machines.pdf
│ ├── Lift Arms – Install – Radial Arc Machines.pdf
│ ├── Lift Arms – Remove – Extended Reach Machines.pdf
│ ├── Lift Arms – Remove – Radial Arc Machines.pdf
│ ├── Lift Cylinder – Remove and Install – Extended Reach Machines.pdf
│ ├── Lift Cylinder – Remove and Install – Radial Arc Machines.pdf
│ ├── Pilot Operated Hydraulic Control – Assemble.pdf
│ ├── Pilot Operated Hydraulic Control – Disassemble.pdf
│ ├── Pilot Operated Hydraulic Control – Install.pdf
│ ├── Pilot Operated Hydraulic Control – Remove.pdf
│ ├── Quick Coupler – Remove and Install.pdf
│ ├── Refrigerant Accumulator – Remove and Install.pdf
│ ├── Refrigerant Compressor and Support Housing – Remove and Install.pdf
│ ├── Refrigerant Compressor – Remove and Install.pdf
│ ├── Refrigerant Condenser – Remove and Install.pdf
│ ├── Seat – Remove and Install.pdf
│ ├── Solenoid Valve and Mounting (Coupler) – Remove and Install.pdf
│ ├── Solenoid Valve (Compressor Motor) – Remove and Install.pdf
│ ├── System Pressure – Release – Hydraulic.pdf
│ ├── Tilt Cylinder – Remove and Install.pdf
│ └── Window Wiper Motor – Remove and Install.pdf
├── UENR0254 – Schematic (216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loader & 247B3, 257B3 Multi-Terrain Loader & 259B3 Compact Track Loader Electrical System)
│ ├── Collage.pdf
│ └── Main.pdf
├── UENR0255 – Systems Operation (259B3 Compact Track Loader, 247B3, 257B3 Multi Terrain Loaders & 216B3, 26B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Electronic Control System)
│ ├── Electrical Input Components.pdf
│ ├── Electrical Output Components.pdf
│ ├── Electronic Control Module.pdf
│ ├── Features.pdf
│ ├── General Information.pdf
│ └── Location of Electrical Components.pdf
├── UENR0255 – Testing & Adjusting (259B3 Compact Track Loader, 247B3, 257B3 Multi Terrain Loaders & 216B3, 26B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Electronic Control System)
│ ├── Calibration.pdf
│ ├── Electrical Connector – Inspect.pdf
│ ├── Electronic Control Module (ECM) – Flash Program.pdf
│ ├── Electronic Control Module (ECM) – Replace.pdf
│ ├── System Schematic.pdf
│ ├── Wiring Harness (Open Circuit) – Test.pdf
│ └── Wiring Harness (Short Circuit) – Test.pdf
├── UENR0255 – Troubleshooting (259B3 Compact Track Loader, 247B3, 257B3 Multi Terrain Loaders & 216B3, 26B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Electronic Control System)
│ ├── Connector Locations.pdf
│ ├── Diagnostic Capabilities.pdf
│ ├── Diagnostic Code List.pdf
│ ├── Emerging Symptom Information.pdf
│ ├── General Information.pdf
│ ├── Indicator Lamp Does Not Illuminate During the Power Up Self Test.pdf
│ ├── Indicator Lamp Is On Continuously.pdf
│ ├── MID 039 – CID 0041 – FMI 03.pdf
│ ├── MID 039 – CID 0041 – FMI 04.pdf
│ ├── MID 039 – CID 0070 – FMI 03.pdf
│ ├── MID 039 – CID 0070 – FMI 04.pdf
│ ├── MID 039 – CID 0110 – FMI 03.pdf
│ ├── MID 039 – CID 0110 – FMI 04.pdf
│ ├── MID 039 – CID 0133 – FMI 04.pdf
│ ├── MID 039 – CID 0133 – FMI 05.pdf
│ ├── MID 039 – CID 0133 – FMI 06.pdf
│ ├── MID 039 – CID 0358 – FMI 03.pdf
│ ├── MID 039 – CID 0358 – FMI 05.pdf
│ ├── MID 039 – CID 0358 – FMI 06.pdf
│ ├── MID 039 – CID 0490 – FMI 03.pdf
│ ├── MID 039 – CID 0490 – FMI 04.pdf
│ ├── MID 039 – CID 0598 – FMI 03.pdf
│ ├── MID 039 – CID 0598 – FMI 05.pdf
│ ├── MID 039 – CID 0598 – FMI 06.pdf
│ ├── MID 039 – CID 0600 – FMI 03.pdf
│ ├── MID 039 – CID 0600 – FMI 04.pdf
│ ├── MID 039 – CID 0681 – FMI 03.pdf
│ ├── MID 039 – CID 0681 – FMI 05.pdf
│ ├── MID 039 – CID 0681 – FMI 06.pdf
│ ├── MID 039 – CID 1076 – FMI 03.pdf
│ ├── MID 039 – CID 1076 – FMI 06.pdf
│ ├── MID 039 – CID 1187 – FMI 04.pdf
│ ├── MID 039 – CID 1188 – FMI 04.pdf
│ ├── MID 039 – CID 1190 – FMI 04.pdf
│ ├── MID 039 – CID 1627 – FMI 04.pdf
│ ├── MID 039 – CID 1627 – FMI 05.pdf
│ ├── MID 039 – CID 1627 – FMI 06.pdf
│ ├── MID 039 – CID 1695 – FMI 04.pdf
│ ├── MID 039 – CID 2204 – FMI 03.pdf
│ ├── MID 039 – CID 2204 – FMI 04.pdf
│ ├── MID 039 – CID 2204 – FMI 08.pdf
│ ├── MID 039 – CID 2211 – FMI 03.pdf
│ ├── MID 039 – CID 2211 – FMI 05.pdf
│ ├── MID 039 – CID 2211 – FMI 06.pdf
│ ├── MID 039 – CID 2212 – FMI 03.pdf
│ ├── MID 039 – CID 2212 – FMI 05.pdf
│ ├── MID 039 – CID 2212 – FMI 06.pdf
│ ├── MID 039 – CID 2473 – FMI 04.pdf
│ ├── Power Supply Circuit of Electronic Control Module.pdf
│ ├── Service Tools.pdf
│ ├── Starting System.pdf
│ ├── Switch Circuits.pdf
│ ├── Symptom Troubleshooting.pdf
│ └── Using Caterpillar Electronic Technician to Determine Diagnostic Codes.pdf
├── UENR2643 – Schematic (216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loader & 247B3, 257B3 Multi-Terrain Loader & 259B3 Compact Track Loader Electrical System)
│ ├── Collage.pdf
│ └── Main.pdf
├── UENR3951 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3 Skid Steer Loader, Multi-terrain Loader, Compact Track Loader Hydraulic System)
│ ├── Collage.pdf
│ └── Main.pdf
└── UENR3952 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3 Skid Steer Loader, Multi-terrain Loader, Compact Track Loader Hydraulic System)
├── Collage.pdf
└── Main.pdf
…