INSTANT DOWNLOAD (add to cart)
Complete workshop & service manual with electrical wiring diagrams for Caterpillar CB-534C & CB-634C Vibratory Compactors. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This Caterpillar CB-534C & CB-634C Vibratory Compactors service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
FILELIST:
KEBU6877 – Operation & Maintenance Manual (CB-534C Vibratory Compactor)
KENR2845 – Specifications (CB-534C & CB-634C Vibratory Compactors Propel System)
KENR2845 – Systems Operation (CB-534C & CB-634C Vibratory Compactors Propel System)
KENR2845 – Testing & Adjusting (CB-534C & CB-634C Vibratory Compactors Propel System)
KENR2847 – Specifications (CB-534C & CB-634C Vibratory Compactors Vibratory System)
KENR2847 – Systems Operation (CB-534C & CB-634C Vibratory Compactors Vibratory System)
KENR2847 – Testing & Adjusting (CB-534C & CB-634C Vibratory Compactors Vibratory System)
KENR2849 – Specifications (CB-534C & CB-634C Vibratory Compactors Steering System)
KENR2849 – Systems Operation (CB-534C & CB-634C Vibratory Compactors Steering System)
KENR2849 – Testing & Adjusting (CB-534C & CB-634C Vibratory Compactors Steering System)
KENR2853 – Disassembly & Assembly (CB-634C Vibratory Compactor Machine Systems)
KENR2854 – Disassembly & Assembly (3116 Engine Supplement for CB-634C Vibratory Compactors)
KENR2856 – Schematic (CB-634C Vibratory Compactors Electrical System)
KENR2862 – Specifications (CB-634C Vibratroy Compactor Electrical System)
KENR2869 – Specifications (CB-434C, CB-534C & CB-634C Vibratory Compactors Water Spray System)
KENR2869 – Systems Operation (CB-434C, CB-534C & CB-634C Vibratory Compactors Water Spray System)
KENR2869 – Testing & Adjusting (CB-434C, CB-534C & CB-634C Vibratory Compactors Water Spray System)
KENR2846 – Systems Operation (CB-534C & CB-634C Vibratory Compactors Propel System).pdf
KENR2846 – Testing & Adjusting (CB-534C & CB-634C Vibratory Compactors Propel System).pdf
KENR2848 – Systems Operation (CB-534C & CB-634C Vibratory Compactor Vibratory System).pdf
KENR2848 – Testing & Adjusting (CB-534C & CB-634C Vibratory Compactor Vibratory System).pdf
KENR2855 – Schematic (CB-634 & CB-634C Vibratory Compactors Hydraulic System).pdf
KENR2862 – System Operation (CB-634C Vibratroy Compactor Electrical System).pdf
KENR2862 – Testing & Adjusting (CB-634C Vibratroy Compactor Electrical System).pdf
EXCERPT:
Testing And Adjusting
SMCS – 4351-081; 5058-081
Introduction
Reference: For Specifications with illustrations, refer to the Specifications for the CB-534C and CB-634C Propel System, Form No. KENR2845. If the Specifications in Form No. KENR2845 are not the same as listed in the Systems Operation and the Testing And Adjusting, look at the print date on the back cover of each book. Use the Specifications listed in the book with the latest date.
Troubleshooting
During a diagnosis of the hydraulic system, remember that correct oil flow and pressure are necessary for correct operation. The output of the pump (oil flow) increases with an increase in engine speed (rpm) and decreases when engine speed (rpm) is decreased. Oil pressure is caused by resistance to the flow of oil.
The 6V4161 Pressure Gauge Kit can be used to make pressure tests on the propel system. Before any tests are made, visually inspect the complete hydraulic system for leakage of oil and for parts that are damaged. For some of the tests a magnet and a mm (in) measuring rule are usable tools
When any test is made of the propel system, the hydraulic oil must be at the normal temperature for operation.
…