Fiat Bravo 2007-2010 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆
* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!
This high QUALITY official manual for Fiat Bravo 2007-2010 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described.
MAKE: Fiat
MODEL: Nuova Bravo (Type 198 New Bravo, aka Ritmo) (1.4 16V-16V TJet, 1.9 JTD 8V-16V)
YEAR: 2007, 2008, 2009, 2010
LANGUAGE: EN/DE/ES/FR/IT/NL/PL/GK/PT/CZ/TR
INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.
CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.
PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.
REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.
Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.
This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Your Fiat Bravo 2007-2010 (ALL MODELS ARE COVERED). All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.
EXCERPTS:
NUOVA BRAVO 1.4 16v INTRODUCTION – BRAKE PUMP, RESERVOIR AND LOAD PROPORTIONING VALVE
CONSTRUCTION SPECIFICATIONS
A large diameter (10″) Bosch brake servo with an aluminium pump and extended stroke has been adopted to guarantee plenty of pedal travel in reserve even in extreme overheating conditions caused by intensive usage.
The hydraulic braking system reserve fluid reservoir is press-fitted on the top part of the pump.
There is an attachment on the reservoir for connecting the hydraulic clutch release system supply pipe.
There is an insufficient fluid level sensor on the reservoir which is activated when the fluid is below the minimum level, signalling this condition to the Body Computer, which then lights up the warning light on the instrument panel.
1. Brake fluid reservoir
2. Brake servo
3. Brake pedal
4. Clutch pump supply pipe attachment
5. Aluminium master cylinder
6. Insufficient brake fluid level sensor
SPECIFICATIONS
The vehicle is equipped with a system that cleans and washes the front windscreen. The vehicle may be fitted as an option with a pressurized liquid washing system for the front headlamps.
Reservoir
The reservoir is located in the left side of the wheel arch compartment and it allows the screen washer system pump to supply the water-antifreeze mixture required to clean the front window. If the vehicle is equipped with the relevant option, it also supplies the headlamp washer system via a special pump.
The reservoir capacity ensures a minimum of 25 washing cycles and it ranges in size from a minimum of about 5 litres for the version without a headlamp washer to up to around 6 litres if equipped with a headlamp washer.
The reservoir is made out of plastic and contains external housings for the pump that supplies the windscreen washer and headlamp washers (if fitted).
1 – Windscreen washer fluid reservoir
2 – Pump supplying fluid to the nozzles
Controls
The control of the wiping functions and, in particular, of the:
– windscreen wiper: sweep rate;
– rearscreen wiper: sweep rate and control during reversing;
– windscreen wiper function: smart washing;
– rearscreen washer function: smart washing;
is managed by the electronic module inside the steering column switch unit.
The right lever allows the activation of the various functions.
Operation
Windscreen wiper
Manual mode operation
– Pos. A: OFF
– Pos. B: Intermittent / Automatic
– Pos. C: Continuous 1st speed
– Pos. D: Continuous 2nd speed
– Pos. E: Anti-panic (temporary speed – unstable)
When the ring nut for the steering column switch unit right lever is moved downwards, to one of the three positions:
– intermittent
– first speed continuous
– second speed continuous
the windscreen wiper motor is activated according to the following logic.
Intermittent: the windscreen wiper is operated at the first speed but with a pause between one stroke and the next, that varies according to the speed of the vehicle (from a minimum of 1.1 secs. above 110 km/h to a maximum of 4.7 secs with the vehicle stationary).
First speed continuous: the windscreen wiper is operated at the first speed at 45 strokes/minute.
Second speed continuous: the windscreen wiper is operated at the second speed at 65 strokes/minute.