Pages from 9813-2050 – JCB 3DX, 4DX Backhoe Loader Service Manual
Complete workshop & service manual with electrical wiring diagrams for JCB 3DX, 4DX Backhoe Loader. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This JCB 3DX, 4DX Backhoe Loader service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
FILELIST:
550-42426 – JCB 3DX Backhoe Loader Service Manual.pdf
550-42914 – JCB India 4DX Backhoe Loader Service Manual.pdf
9813-2050 – JCB 3DX, 4DX Backhoe Loader Service Manual.pdf
EXCERPT:
3DX / 4DX Backhoe Loader
Service Manual – 3DX / 4DX Backhoe Loader
Section 1 – General Information
Section 2 – Operator’s Manual
Section A – Attachments
Section B – Body and Framework
Section C – Electrics
Section D – Controls
Section E – Hydraulics
Section F – Transmission
Section G – Brakes
Section H – Steering
…
Bucket Crowd Ram
Removal
Fig 128. (T 161).
1 Park the machine on firm level ground, engage the parking brake and set the transmission to neutral.
Lower the backhoe and loader end to the ground and stop the engine.
!MWARNING
Hydraulic Pressure
Hydraulic fluid at system pressure can injure you.
Before connecting or removing any hydraulic hose, residual hydraulic pressure trapped in the service hose line must be vented. Make sure the hose service line has been vented before connecting or removing hoses. Make sure the engine cannot be started while the hoses are open.
2 Vent residual hydraulic pressure from the backhoe hoses by operating the backhoe controls back and forth several times.
Note: If a hose burst protection valve is fitted on the ram, the system will not vent. Extreme caution must be used when releasing hydraulic connections – release the
connections one turn and allow the pressure to dissipate.
3 Label and then remove the bucket crowd ram hoses
A. Plug and cap all open orifices to prevent loss of fluid and ingress of dirt.
…