INSTANT DOWNLOAD (add to cart)
John Deere 326E Backhoe Loader Repair Technical Manual (TM13091X19)
Complete Repair Technical Manual for John Deere 326E Backhoe Loader. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
John Deere 326E Backhoe Loader Repair Technical Manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
TM13091X19 – 326E Skid Steer Loader (Manual Controls).pdf
451 pages, bookmarked, Searchable, Printable, high quality PDF
EXCERPT:
TM13091X1900 – General Information
TM13091X1901 – Wheel or Tracks
TM13091X1902 – Axles and Suspesion Systems
TM13091X1903 – Transission
TM13091X1904 – Engine
TM13091X1905 – Engine Auxiliary System
TM13091X1917 – Frame or Supporting Structure
TM13091X1918 – Operator’s Station
TM13091X1919 – Sheet Metal and Styling
TM13091X1920 – Safety and Convenience
TM13091X1921 – Main Hydraulic System
TM13091X1931 – Loader
TM13091X1999 – Deal Fabricated Tools
…
If necessary, remove hydraulic oil filter manifold. See Hydraulic Oil Filter Manifold Remove and Install . (Group 3160.)
9. TX1151196A-UN: Hydraulic Oil Cooler (326E with heavy duty cooler shown)
LEGEND:
1 – Cap Screw (4 used SD cooler, 2 used HD cooler)
2 – Filler Neck
3 – Bracket
69 – Hydraulic Oil Cooler
198 – Hydraulic Oil Cooler-to-Hydraulic Oil Reservoir Line
241 – Hydraulic Control Valve-to-Hydraulic Oil Cooler Bypass Valve Line
Install identification tags and disconnect hydraulic hoses (198 and 237 or 241) from hydraulic oil cooler. Close all openings using caps and plugs.
10. Remove cap screws (1) and move bracket (3) to provide clearance for hydraulic oil cooler.
11. Remove hydraulic oil cooler.
12. Clean and inspect parts. Repair or replace as necessary.
13. Install hydraulic oil cooler.
14. Move bracket to original position and install cap screws.
15. Connect hydraulic hoses to hydraulic oil cooler.
16. If removed, install hydraulic oil filter manifold. See Hydraulic Oil Filter Manifold Remove and Install . (Group 3160.)
17. If removed, install final fuel filter assembly. See Final Fuel Filter Assembly Remove and Install . (Group 0560.)
18. Remove vacuum or fill hydraulic reservoir.
…