INSTANT DOWNLOAD (add to cart)
Kia Soul 2009-2013 Workshop Repair & Service Manual
Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Kia Soul 2009-2013. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.
This manual for Kia Soul 2009-2013 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.
EXCERPT:
2012-13 RESTRAINTS Seat Belt – Soul
ServiceRepairManual
FRONT SEAT BELT
COMPONENTS AND COMPONENTS LOCATION
Components
Fig. 1: Identifying Front Seat Belt Components
REPAIR PROCEDURES
Replacement
Front Seat Belt Replacement
CAUTION: When installing the belt, make sure not to damage the pretensioner.
1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2. Remove the following items fist:
A. Front seat assembly. (Refer to the “FRONT SEAT “)
B. Front door scuff trim & Rear door scuff trim. (Refer to the “INTERIOR TRIM “)
3. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pins (A) as arrow direction. And then remove the seat belt after pushing the lock pin (B).
Fig. 2: Pushing Seat Belt Lock Pin
4. Using a screwdriver or remover, remove the center pillar lower trim (A).
Fig. 3: Identifying Center Pillar Lower Trim
5. After loosening the mounting bolts, then remove the center pillar upper trim (B).
Fig. 4: Identifying Center Pillar Upper Trim
6. After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque:
…