INSTANT DOWNLOAD (add to cart)
NOTES: Manual for Micra K13 series is in Spanish only
Complete workshop & service manual with electrical wiring diagrams for Nissan Micra (K10/K12K/13). It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
Nissan Micra (K10/K12K/13) service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
10,000+ pages, bookmarked, Searchable, Printable, high quality PDF
’02-’04 Micra (K12) (EN)
’02-’06 Micra (K12) (EN)
’02-’07 Micra (K12) (EN)
’11 Micra (K13) (ES)
’83-’93 Micra (K10) (EN).pdf
’87 Micra (K10) (EN).pdf
EXCERPT:
DRIVE BELTS
Checking Drive Belts
WARNING:
Be sure to perform when the engine is stopped.
1. Inspect belts for cracks, fraying, wear and oil. If necessary, replace.
2. Tighten auto-tensioner lock nut (models with A/C compressor) or idler pulley lock nut (models without A/C compressor) by hand and measure deflection or tension without looseness.
3. When measuring deflection, apply 98 N (10 kg, 22 lb) at the marked point as shown (models without A/C compressor).
Tension Adjustment
MODELS WITH A/C COMPRESSOR
Belt tensioning is not necessary, as it is automatically adjusted by auto-tensioner.
MODELS WITHOUT A/C COMPRESSOR
Tighten the accessories belt using tool (Mot. 1638) by tightening the nut (both tension wheel mounting bolts are loosened).
Check the belt tension using tools (Mot. 1715) and (Mot. 1505)
…