Category: Manual

INSTANT DOWNLOAD (add to cart)

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Caterpillar 324E, 329E Hydraulic Excavator. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your Caterpillar 324E, 329E Hydraulic Excavator like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Caterpillar 324E, 329E Hydraulic Excavator is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

2,163 pages, bookmarked, Searchable, Printable, high quality PDF

FILE LIST:
324E & 329E Hydraulic Excavator Instructor Technical Training Package
KENR7970 – Testing & Adjusting (312E,F, 313F, 316E,F, 318E,F, 320E,F, 323E,F, 324E, 325F, 326F, 329E,F, 330F, 335F, 336E,F, 340F, 349E,F, 352F, 374F, 390F AC & Heating)
KENR9509 – Systems Operation (E Series Monitor Monitoring System)
KENR9698 – Systems Operation (320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F & 330F Excavators Tool Control System)
KENR9698 – Testing & Adjusting (320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F & 330F Excavators Tool Control System)
KENR9843 – Disassembly & Assembly (324E & 329E Excavators & 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement)
KENR9844 – Disassembly & Assembly (324E & 329E Excavators & 329E MHPU Mobile Hydraulic Power Unit Machine Systems)
UENR1513 – Specifications (324E Excavator Machine System)
UENR1514 – Systems Operation (324E & 329E Excavators Hydraulic System)
UENR1515 – Testing & Adjusting (324E Excavator Hydraulic System)
UENR1516 – Schematic (324E Excavator Hydraulic System)
UENR1517 – Schematic (324E, 329E & 329E MHPU Excavator Electrical System)
UENR1518 – Testing & Adjusting (320E, 323F, 324E, 326F, 329E, 329F & 330F Excavators Long Reach Front)
UENR1525 – Testing & Adjusting (329E Excavator Hydraulic System)
UENR1526 – Schematic (329E Excavator & 329E MHPU Hydraulic System)
UENR2176 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2177 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2178 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2179 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2180 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2181 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2182 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2184 – Schematic (320E, 324E & 329E Excavators Hydraulic System – Attachment)
UENR2188 – Schematic (324E & 329E Excavators Hydraulic System – Attachment)
UENR2189 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2190 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2191 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2192 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2193 – Schematic (329E Excavator Hydraulic System – Attachment)
UENR2194 – Schematic (320E, 324E & 329E Excavators Hydraulic System – Attachment)
UENR2195 – Schematic (320E, 324E & 329E Excavators Hydraulic System – Attachment)
UENR3249 – Schematic (324E, 329E Excavator & 329E MHPU Electrical System)
UENR3884 – Schematic (324E, 329E Excavator & 329E MHPU Electrical System)
KENR7970 – Systems Operation (312E,F, 313F, 316E,F, 318E,F, 320E,F, 323E,F, 324E, 325F, 326F, 329E,F, 330F, 335F, 336E,F, 340F, 349E,F, 352F, 374F, 390F AC & Heating).pdf
…

EXCERPT:
Background
Commonly used fluid line connectors are: Straight Threaded
1. O-Rings (STOR)
2. O-ring Face Seal (ORFS)
3. Bolt Flanges (SAE Code 61, 62, and CAT Flange)
Radial O-ring seals and conventional face seals are not fluid line connectors.
O-ring sealing depends on proper seating of the seal in the groove, maintaining this condition during assembly of the joint, and proper torque on the connection. Improper assembly practices increase the likelihood of leaking joints.
Assembly Aids – Retention compounds and lubricants must not be used on STOR/ORFS.
Applications requiring the use of a retention compound need to be validated for seal compatibility with the retention compound by Caterpillar before use.
Assembly Tooling
O-rings may be installed into a fitting/adapter without the use of a tool however, installing a seal without the use of a tool places the seal at extreme risk of damage. It is recommended that appropriate tooling should be used for the installation of O-rings.
Types of Installation Tooling
STOR Installation Tool
Illustration 2
STOR installation tools
(1) Tooling head
(2) Head edge
Illustration 3
Anatomy of an STOR/ORFS Fitting
(3) STOR O-ring
(4) Nut
(5) Washer
(6) ORFS O-ring
When installing an O-ring over a threaded fitting, it is critical to protect the seal from damage from threads. To assist the assembly and protect the seal, an installation tool must be used shown in Illustration 2. The seal protector slides over the threads and allows for an O-ring to be installed, reducing the risk of a leak due to nicks, cuts, gouges, and twisting of the seal.
Tool Ordering Information
The tooling listed below can be ordered from Caterpillar using the part numbers in Table 1.
…

Yamaha FJ600/FZ600/XJ600/YX600 1984-1992 Factory Service & Shop Manual

Complete workshop & service manual with electrical wiring diagrams for 1984-1992 Yamaha FJ600, FZ600, XJ600, YX600. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This FJ600, FZ600, XJ600, YX600 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MAKE: Yamaha
MODEL: FJ600, FZ600, XJ600, YX600 Radian Air-cooled Fours
YEAR: 1984 1985 1986 1987 1988 1989 1990 1991 1992

EXCERPT:
Chapter 2 Engine, clutch and transmission
1 General information
The engine/transmission is an air-cooled, in-line four cylinder unit.
The valves (one intake and one exhaust per cylinder) are operated by double overhead camshafts which are chain driven off the crankshaft.
The engine/transmission assembly is constructed from aluminum alloy.
The crankcase is divided horizontally.
The crankcase incorporates a wet sump, pressure-fed lubrication system which uses a gear-driven, single-rotor oil pump, an oil filter, relief valves and an oil level switch. Also contained in the crankcase is the starter motor clutch.
Power from the crankshaft is routed to the transmission via the clutch, which is of the coil spring, wet multi-plate type and is gear driven off the crankshaft. The transmission is a six-speed, constant-mesh unit.
2 Operations possible with the engine in the frame
The components and assemblies listed below can be removed without having to remove the engine from the frame. If, however, a
number of areas require attention at the same time, removal of the engine is recommended.
Gear selector mechanism external components:
Starter motor
Alternator
Clutch assembly
Oil pump
Valve cover, camshafts and lifters
Cam chain tensioner
Cylinder head
Cylinder block and pistons…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Caterpillar 303.5C and 303C Mini Hydraulic Excavators. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

Caterpillar 303.5C and 303C Mini Hydraulic Excavators service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

642 pages, bookmarked, Searchable, Printable, high quality PDF

FILE LIST:
RENR9613 – Specifications (303.5C CR and 303C CR Mini Hydraulic Excavators Machine System Specifications)
RENR9614 – Systems Operation (303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System)
RENR9615 – Testing and Adjusting (303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System)
RENR9617 – Disassembly and Assembly (303.5C and 303C Mini Hydraulic Excavators Machine Systems)
RENR9626 – Schematic (303.5C CR Mini Hydraulic Excavator Hydraulic System)
RENR9627 – Disassembly and Assembly (Mini Hydraulic Excavators Engine Supplement)
RENR9628 – Schematic (303.5C CR Mini Hydraulic Excavator Electrical System)
UENR4045 – Schematic (303C, 303.5C, 303.5D, 303.5E, 304C, 304D, 304E, 305C, 305D, 305E, 305.5D and 305.5E Mini Hydraulic Excavators Air Conditioning System)

EXCERPT:
Engine Oil Filter Base – Remove and Install
Removal Procedure
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
1. Disconnect hose assemblies (1) and (2) and remove bolts (3) in order to remove engine oil filter base (4) .
Installation Procedure
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Caterpillar 267B, 277B, 287B Multi Terrain Loaders. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Caterpillar 267B, 277B, 287B Multi Terrain Loaders service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

1,585 pages, bookmarked, Searchable, Printable, high quality PDF

MANUAL LIST:
RENR4883 – Disassembly & Assembly (267B, 277B, 287B Multi Terrain Loaders Engine Supplement)
RENR4884 – Disassembly & Assembly (267B, 277B & 287B Multi Terrain Loaders Power Train)
RENR4885 – Specifications (267B, 277B & 287B Multi Terrain Loaders Machine Systems)
RENR4886 – Systems Operation (267B, 277B & 287B Multi Terrain Loaders Machine Systems)
RENR4887 – Testing & Adjusting (267B, 277B & 287B Multi Terrain Loaders Machine Systems)
RENR4888 – Disassembly & Assembly (267B, 277B & 287B Multi Terrain Loaders Machine Systems)
RENR4889 – Schematic (247B, 247B2, 257B, 257B2, 267B, 277B, 287B Multi Terrain Loaders Hydraulic System)
RENR6417 – Systems Operation (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
RENR6417 – Testing & Adjusting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
RENR6417 – Troubleshooting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
RENR6418 – Systems Operation (247B, 257B, 267B, 277B, 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B, 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
RENR6418 – Testing & Adjusting (247B, 257B, 267B, 277B, 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B, 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
RENR6418 – Troubleshooting (247B, 257B, 267B, 277B, 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B, 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
RENR6419 – Schematic (Skid Steer Loaders_216B, 216B2, 226B, 226B2, 232B, 232B2, 236B, 236B2, 242B, 242B2, 246B, 248B, 252B, 252B2, 262B, 268B & Multi Terrain Loaders_247B, 247B2, 257B, 257B2, 267B, 277B, 287B Electrical System)
RENR8749 – Schematic (248B and 268B Skid Steer Loader 287B Multi Terrain Loader Hydraulic System)
RENR8751 – Schematic (247B, 247B2, 257B, 257B2, 267B, 277B, 287B Multi-Terrain Loader Hydraulic System)

EXCERPT:
3. spring (5) . Remove fitting (6).
Illustration 4
Typical Example
4. Install Tooling (H) . Use low pressure compressed air to remove piston (7) .
Note: Low-pressure air is required in order to allow the piston to release from the motor.
Note: Tooling (H) is required in order to prevent damage to the piston.
5. Remove O-ring seal (8) .
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Caterpillar 247B, 247B2, 247B3, 257B, 257B2, 257B3 Multi Terrain Loaders. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Caterpillar 247B, 247B2, 247B3, 257B, 257B2, 257B3 Multi Terrain Loaders service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

3,187 pages, bookmarked, Searchable, Printable, high quality PDF

FILELIST:
├── KENR8654 – Schematic (216B2, 226B2, 232B2, 236B2 , 242B2, & 252B2 Skid Steer Loader 247B2 & 257B2 Multi-Terrain Loader Electrical System)
│   ├── Collage.pdf
│   └── Main.pdf
├── KENR8818 – Specifications (247B2 & 257B2 Multi Terrain Loaders Machine Systems)
│   ├── Axle – Front.pdf
│   ├── Axle – Rear.pdf
│   ├── Bogie Wheel.pdf
│   ├── Control Manifold and Solenoid (Parking Brake).pdf
│   ├── Control Manifold and Solenoid (Work Tool Positioner).pdf
│   ├── Control Manifold (High Flow).pdf
│   ├── Control Manifold (Quick Coupler).pdf
│   ├── Control Valve (Work Tool).pdf
│   ├── Coupler Cylinder.pdf
│   ├── Engine Enclosure.pdf
│   ├── Gas Spring Group (Cab).pdf
│   ├── Gear Motor (Fan) – Demand.pdf
│   ├── Gear Motor (Fan).pdf
│   ├── Gear Pump – High Flow or Boost Flow.pdf
│   ├── Gear Pump.pdf
│   ├── Hydraulic Oil Filter.pdf
│   ├── Hydraulic Tank.pdf
│   ├── Idler Wheel 1.pdf
│   ├── Idler Wheel 2.pdf
│   ├── Lift Arm Cylinder and Mounting 1.pdf
│   ├── Lift Arm Cylinder and Mounting 2.pdf
│   ├── Lift Cylinder – Left Hand.pdf
│   ├── Lift Cylinder.pdf
│   ├── Lift Cylinder – Right Hand.pdf
│   ├── Machine Frame and Mounting 1.pdf
│   ├── Machine Frame and Mounting 2.pdf
│   ├── Pilot Operated Hydraulic Control 1.pdf
│   ├── Pilot Operated Hydraulic Control 2.pdf
│   ├── Pilot Operated Hydraulic Control – Hydrostatic 1.pdf
│   ├── Pilot Operated Hydraulic Control – Hydrostatic 2.pdf
│   ├── Pilot Operated Hydraulic Control – Hydrostatic.pdf
│   ├── Pilot Operated Hydraulic Control – Work Tool.pdf
│   ├── Piston Motor.pdf
│   ├── Piston Pump.pdf
│   ├── Pump Mounting (Hydrostatic).pdf
│   ├── Quick Coupler 1.pdf
│   ├── Quick Coupler 2.pdf
│   ├── Radiator and Hydraulic Oil Cooler (Fan).pdf
│   ├── Radiator and Hydraulic Oil Cooler.pdf
│   ├── Return Manifold.pdf
│   ├── ROPS Mounting.pdf
│   ├── Sprocket.pdf
│   ├── Tilt Cylinder – Left Hand.pdf
│   ├── Tilt Cylinder – Right Hand.pdf
│   ├── Track Drive – Left Hand.pdf
│   ├── Track Drive – Right Hand.pdf
│   ├── Track Tensioner.pdf
│   ├── Undercarriage – Left Hand.pdf
│   └── Undercarriage – Right Hand.pdf
├── KENR8819 – Systems Operation (247B2 and 257B2 Multi Terrain Loaders Machine Systems)
│   ├── Control Manifold and Solenoid (Work Tool Positioner) – If Equipped.pdf
│   ├── Control Valve (Work Tool).pdf
│   ├── General Information.pdf
│   ├── Governor Control.pdf
│   ├── Hydrostatic System.pdf
│   ├── Pilot Hydraulic System.pdf
│   ├── Pilot Valve (Joystick).pdf
│   ├── Piston Motor (Hydrostatic).pdf
│   ├── Piston Pump (Hydrostatic).pdf
│   ├── Undercarriage.pdf
│   └── Work Tool Hydraulic System.pdf
├── KENR8820 – Testing and Adjusting (247B2 and 257B2 Multi Terrain Loaders Machine Systems)
│   ├── Accumulator (Pilot) – Test and Charge.pdf
│   ├── Hydraulic Oil Contamination – Test.pdf
│   ├── Hydraulic System Troubleshooting.pdf
│   ├── Hydrostatic System – Flush and Fill.pdf
│   ├── Hydrostatic System – Test and Adjust.pdf
│   ├── Hydrostatic System Troubleshooting.pdf
│   ├── Line Relief Valve – Test and Adjust.pdf
│   ├── Machine Preparation.pdf
│   ├── Main Relief Valve – Test and Adjust.pdf
│   ├── Operational Checks.pdf
│   ├── Pilot System Pressure – Test.pdf
│   ├── Pump Flow – Test.pdf
│   ├── System Pressure – Release.pdf
│   ├── Visual Inspection.pdf
│   └── Worksheets – Troubleshoot.pdf
├── KENR9408 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3 Skid Steer Loader, Multi-terrain Loader, Compact Track Loader Hydraulic System)
│   ├── Collage.pdf
│   └── Main.pdf
├── RENR4873 – Disassembly and Assembly (247B and 257B Multi Terrain Loaders Engine Supplement)
│   ├── Air Cleaner – Remove and Install.pdf
│   ├── Alternator – Remove and Install.pdf
│   ├── Battery and Battery Cable – Separate and Connect.pdf
│   ├── Cab – Tilt.pdf
│   ├── Electric Starting Motor – Remove and Install.pdf
│   ├── Engine Enclosure – Remove and Install.pdf
│   ├── Engine – Install .pdf
│   ├── Engine – Remove .pdf
│   ├── Fuel Filter Group – Remove and Install.pdf
│   ├── Gear Motor (Fan) – Install.pdf
│   ├── Gear Motor (Fan) – Remove.pdf
│   ├── Hydraulic System Pressure – Release.pdf
│   ├── Muffler – Remove and Install.pdf
│   ├── Pump Mounting – Remove and Install.pdf
│   ├── Radiator and Hydraulic Oil Cooler – Install.pdf
│   ├── Radiator and Hydraulic Oil Cooler – Remove.pdf
│   ├── Water Pump – Remove and Install.pdf
│   └── Water Temperature Regulator – Remove and Install.pdf
├── RENR4874 – Disassembly and Assembly (247B, 247B2, 257B and 257B2 Multi Terrain Loaders Power Train)
│   ├── Axle (Front) – Remove and Install.pdf
│   ├── Axle (Rear) – Remove and Install.pdf
│   ├── Bogie Axle – Assemble.pdf
│   ├── Bogie Axle – Disassemble.pdf
│   ├── Bogie Axle – Install.pdf
│   ├── Bogie Axle – Remove.pdf
│   ├── Bogie Wheel – Install.pdf
│   ├── Bogie Wheel – Remove.pdf
│   ├── Control Manifold and Solenoid (Parking Brake) – Remove and Install.pdf
│   ├── Heavy Duty Dual Face Seal – Install.pdf
│   ├── Idler Axle – Assemble.pdf
│   ├── Idler Axle – Disassemble.pdf
│   ├── Idler Axle – Install.pdf
│   ├── Idler Axle – Remove.pdf
│   ├── Idler Wheel – Remove and Install.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble.pdf
│   ├── Piston Motor (Hydrostatic) – Install.pdf
│   ├── Piston Motor (Hydrostatic) – Remove.pdf
│   ├── Piston Pump (Hydrostatic) – Assemble.pdf
│   ├── Piston Pump (Hydrostatic) – Disassemble.pdf
│   ├── Piston Pump (Hydrostatic) – Install.pdf
│   ├── Piston Pump (Hydrostatic) – Remove.pdf
│   ├── System Pressure – Release – Hydraulic.pdf
│   ├── Track Drive – Assemble.pdf
│   ├── Track Drive – Disassemble.pdf
│   ├── Track Drive – Install.pdf
│   ├── Track Drive – Remove.pdf
│   ├── Track (Rubber) – Detension and Tension.pdf
│   ├── Track (Rubber) – Remove and Install.pdf
│   ├── Track Tensioner – Remove and Install.pdf
│   └── Undercarriage – Remove and Install.pdf
├── RENR4875 – Specifications (247B and 257B Multi Terrain Loaders Machine Systems)
│   ├── Axle – Front.pdf
│   ├── Axle – Rear.pdf
│   ├── Bogie Wheel.pdf
│   ├── Control Manifold and Solenoid (Parking Brake).pdf
│   ├── Control Manifold (Quick Coupler).pdf
│   ├── Control Valve (Work Tool).pdf
│   ├── Coupler Cylinder.pdf
│   ├── Engine Enclosure.pdf
│   ├── Gas Spring Group (Cab).pdf
│   ├── Gear Motor (Fan).pdf
│   ├── Gear Pump – High Flow or Boost Flow.pdf
│   ├── Gear Pump.pdf
│   ├── Hydraulic Oil Filter.pdf
│   ├── Hydraulic Tank.pdf
│   ├── Idler Wheel.pdf
│   ├── Lift Arm Cylinder and Mounting.pdf
│   ├── Lift Cylinder – Left Hand.pdf
│   ├── Lift Cylinder.pdf
│   ├── Lift Cylinder – Right Hand.pdf
│   ├── Machine Frame and Mounting.pdf
│   ├── Motor Mounting (Hydrostatic).pdf
│   ├── Pilot Operated Hydraulic Control – Hydrostatic.pdf
│   ├── Pilot Operated Hydraulic Control.pdf
│   ├── Pilot Operated Hydraulic Control – Work Tool.pdf
│   ├── Piston Motor.pdf
│   ├── Piston Pump.pdf
│   ├── Pump Mounting (Hydrostatic).pdf
│   ├── Quick Coupler.pdf
│   ├── Radiator and Hydraulic Oil Cooler (Fan).pdf
│   ├── Radiator and Hydraulic Oil Cooler.pdf
│   ├── Return Manifold.pdf
│   ├── ROPS Mounting .pdf
│   ├── Sprocket.pdf
│   ├── Tilt Cylinder – Left Hand.pdf
│   ├── Tilt Cylinder – Right Hand.pdf
│   ├── Track Drive – Left Hand.pdf
│   ├── Track Drive – Right Hand.pdf
│   ├── Track Tensioner.pdf
│   ├── Undercarriage – Left Hand.pdf
│   └── Undercarriage – Right Hand.pdf
├── RENR4876 – Systems Operation (247B and 257B Multi Terrain Loaders Machine Systems)
│   ├── Control Manifold and Solenoid (Work Tool Positioner) – If Equipped.pdf
│   ├── Control Valve (Work Tool).pdf
│   ├── General Information.pdf
│   ├── Governor Control.pdf
│   ├── Hydrostatic System.pdf
│   ├── Pilot Hydraulic System.pdf
│   ├── Pilot Valve (Joystick).pdf
│   ├── Piston Motor (Hydrostatic).pdf
│   ├── Piston Pump (Hydrostatic).pdf
│   ├── Undercarriage.pdf
│   └── Work Tool Hydraulic System.pdf
├── RENR4877 – Testing and Adjusting (247B and 257B Multi Terrain Loaders Machine Systems)
│   ├── Accumulator (Pilot) – Test and Charge.pdf
│   ├── Hydraulic Oil Contamination – Test.pdf
│   ├── Hydraulic System Troubleshooting.pdf
│   ├── Hydrostatic System – Flush and Fill.pdf
│   ├── Hydrostatic System – Test and Adjust.pdf
│   ├── Hydrostatic System Troubleshooting.pdf
│   ├── Line Relief Valve – Test and Adjust.pdf
│   ├── Machine Preparation.pdf
│   ├── Main Relief Valve – Test and Adjust.pdf
│   ├── Operational Checks.pdf
│   ├── Pilot System Pressure – Test.pdf
│   ├── Pump Flow – Test.pdf
│   ├── System Pressure – Release.pdf
│   ├── Visual Inspection.pdf
│   └── Worksheets – Troubleshoot.pdf
├── RENR4878 – Disassembly and Assembly (247B, 247B2, 257B and 257B2 Multi Terrain Loaders Machine Systems)
│   ├── Accumulator – Remove and Install.pdf
│   ├── Air Conditioner and Heater – Assemble.pdf
│   ├── Air Conditioner and Heater – Disassemble.pdf
│   ├── Air Conditioner and Heater – Install.pdf
│   ├── Air Conditioner and Heater – Remove.pdf
│   ├── Cab – Install.pdf
│   ├── Cab – Remove.pdf
│   ├── Cab – Tilt.pdf
│   ├── Control Valve (Work Tool) – Assemble.pdf
│   ├── Control Valve (Work Tool) – Disassemble.pdf
│   ├── Control Valve (Work Tool) – Install.pdf
│   ├── Control Valve (Work Tool) – Remove.pdf
│   ├── Coupler Cylinder – Remove and Install.pdf
│   ├── Disconnecting Snap To Connect Fittings.pdf
│   ├── Diverter Valve – Install.pdf
│   ├── Diverter Valve – Remove.pdf
│   ├── Gas Spring – Remove and Install.pdf
│   ├── Gear Motor – Assemble.pdf
│   ├── Gear Motor – Disassemble.pdf
│   ├── Gear Motor – Install.pdf
│   ├── Gear Motor – Remove.pdf
│   ├── Gear Pump – Assemble.pdf
│   ├── Gear Pump – Disassemble.pdf
│   ├── Gear Pump – Install.pdf
│   ├── Gear Pump – Remove.pdf
│   ├── Hydraulic System Pressure – Release.pdf
│   ├── Hydraulic Tank – Install.pdf
│   ├── Hydraulic Tank – Remove.pdf
│   ├── Lift Arms – Install.pdf
│   ├── Lift Arms – Remove.pdf
│   ├── Lift Cylinder – Install.pdf
│   ├── Lift Cylinder – Remove.pdf
│   ├── Pilot Operated Hydraulic Control – Assemble.pdf
│   ├── Pilot Operated Hydraulic Control – Disassemble.pdf
│   ├── Pilot Operated Hydraulic Control – Install.pdf
│   ├── Pilot Operated Hydraulic Control – Remove.pdf
│   ├── Quick Coupler – Remove and Install.pdf
│   ├── Refrigerant Accumulator – Remove and Install.pdf
│   ├── Refrigerant Compressor and Support Housing – Remove and Install.pdf
│   ├── Refrigerant Condenser and Mounting – Remove and Install.pdf
│   ├── Seat – Remove and Install.pdf
│   ├── Solenoid Valve and Mounting (Coupler) – Remove and Install.pdf
│   ├── Solenoid Valve (Compressor Motor) – Remove and Install.pdf
│   ├── Tilt Cylinder – Install.pdf
│   ├── Tilt Cylinder – Remove.pdf
│   └── Window Wiper Motor – Remove and Install.pdf
├── RENR4889 – Schematic (247B, 247B2, 257B, 257B2, 267B, 277B, 287B Multi Terrain Loaders Hydraulic System)
│   ├── Collage.pdf
│   └── Main.pdf
├── RENR6417 – Systems Operation (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
│   ├── Diagnostic Operation.pdf
│   ├── Electronic Control Module (ECM).pdf
│   ├── Engine Start Interlock.pdf
│   ├── General Information.pdf
│   ├── Hydrostatic System Interlock and Parking Brake Interlock.pdf
│   ├── Indicators.pdf
│   ├── Normal Operation.pdf
│   ├── Related Components.pdf
│   ├── Relays.pdf
│   ├── Solenoid Valve.pdf
│   ├── Switches.pdf
│   └── Work Tool Interlock.pdf
├── RENR6417 – Testing & Adjusting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
│   ├── Electronic Control Module (ECM) – Replace.pdf
│   ├── Glossary of Electrical Terms.pdf
│   └── System Schematic.pdf
├── RENR6417 – Troubleshooting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Interlock Electronic Control System)
│   ├── Armrest Indicator Is Flashing.pdf
│   ├── Charging System.pdf
│   ├── Electrical Component and Connector Locations.pdf
│   ├── Electrical System.pdf
│   ├── Engine Does Not Crank.pdf
│   ├── General Information.pdf
│   ├── Initial Troubleshooting Procedure.pdf
│   ├── Parking Brake Indicator and Armrest Indicator Are Flashing.pdf
│   ├── Parking Brake Indicator and Armrest Indicator Do Not Function Correctly.pdf
│   ├── Parking Brake Indicator Is Flashing.pdf
│   ├── Parking Brake Intermittent.pdf
│   ├── Service Tools.pdf
│   ├── Solenoid Valve (Parking Brake) Does Not Function Correctly.pdf
│   ├── Switch (Hydraulic Lockout).pdf
│   ├── Switch (Parking Brake).pdf
│   └── Work Tool Does Not Function.pdf
├── RENR6418 – Systems Operation (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
│   ├── Cat Data Link.pdf
│   ├── Electronic Control Module (ECM).pdf
│   ├── General Information.pdf
│   ├── Indicators.pdf
│   ├── Normal Operation.pdf
│   ├── Related Components.pdf
│   ├── Sensors.pdf
│   ├── Solenoid Valves.pdf
│   └── Switches.pdf
├── RENR6418 – Testing & Adjusting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
│   ├── Electrical Connector – Inspect.pdf
│   ├── Electronic Control Module (ECM) – Flash Program.pdf
│   ├── Electronic Control Module (ECM) – Replace.pdf
│   ├── Glossary of Electrical Terms.pdf
│   ├── System Schematic.pdf
│   ├── Wiring Harness (Open Circuit) – Test.pdf
│   └── Wiring Harness (Short Circuit) – Test.pdf
├── RENR6418 – Troubleshooting (247B, 257B, 267B, 277B & 287B Multi Terrain Loaders & 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B & 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System)
│   ├── Auxiliary Hydraulic Does Not Function in Either Direction.pdf
│   ├── Auxiliary Hydraulic Does Not Function in One Direction.pdf
│   ├── Diagnostic Capabilities.pdf
│   ├── Diagnostic Code List.pdf
│   ├── Electrical Component and Connector Locations.pdf
│   ├── General Information.pdf
│   ├── High Flow Does Not Function in Either Direction.pdf
│   ├── High Flow Does Not Function in One Direction.pdf
│   ├── Power Supply Circuit of Electronic Control Module.pdf
│   ├── Service Tools.pdf
│   ├── Switch (Armrest) and Switch (Seat).pdf
│   ├── Switch (Continuous Flow).pdf
│   ├── Switch (Hydraulic Lockout).pdf
│   ├── Switch (Interlock Override).pdf
│   ├── Switch (Parking Brake).pdf
│   ├── Switch (Two Speed).pdf
│   └── Using Caterpillar Electronic Technician to Determine Diagnostic Codes.pdf
├── RENR6419 – Schematic (216B, 216B2, 226B, 226B2, 232B, 232B2, 236B, 236B2, 242B, 242B2, 246B, 248B, 252B, 252B2, 262B, 268B & 247B, 247B2, 257B, 257B2, 267B, 277B, 287B Loaders Electrical System)
│   ├── Collage.pdf
│   └── Main.pdf
├── RENR8751 – Schematic (247B, 247B2, 257B, 257B2, 267B, 277B, and 287B Multi-Terrain Loader Hydraulic System)
│   ├── Collage.pdf
│   └── Main.pdf
├── RENR8752 – Schematic (257B Multi Terrain Loader Hydraulic System)
│   ├── Collage.pdf
│   └── Main.pdf
├── RENR8753 – Schematic (257B Multi Terrain Loader Hydraulic System)
│   ├── Collage.pdf
│   └── Main.pdf
├── UENR0251 – Disassembly & Assembly (259B3 Compact Track Loader & 247B3, 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loaders Power Train)
│   ├── Axle – Assemble – Heavy Duty.pdf
│   ├── Axle – Assemble.pdf
│   ├── Axle – Disassemble – Heavy Duty.pdf
│   ├── Axle – Disassemble.pdf
│   ├── Axle (Front) – Remove and Install.pdf
│   ├── Axle – Install.pdf
│   ├── Axle (Rear) – Remove and Install.pdf
│   ├── Axle – Remove .pdf
│   ├── Bogie Axle – Assemble.pdf
│   ├── Bogie Axle – Disassemble.pdf
│   ├── Bogie Axle – Install.pdf
│   ├── Bogie Axle – Remove.pdf
│   ├── Bogie Wheel – Install.pdf
│   ├── Bogie Wheel – Remove.pdf
│   ├── Chain (Drive) – Install.pdf
│   ├── Chain (Drive) – Remove.pdf
│   ├── Chain (Drive) Tension – Adjust.pdf
│   ├── Control Manifold and Solenoid (Parking Brake) – Remove and Install.pdf
│   ├── Heavy Duty Dual Face Seal – Install.pdf
│   ├── Idler – Assemble – Front.pdf
│   ├── Idler – Assemble – Rear.pdf
│   ├── Idler Axle – Assemble.pdf
│   ├── Idler Axle – Disassemble.pdf
│   ├── Idler Axle – Install.pdf
│   ├── Idler Axle – Remove.pdf
│   ├── Idler – Disassemble – Front.pdf
│   ├── Idler – Disassemble – Rear.pdf
│   ├── Idler – Install – Front.pdf
│   ├── Idler – Install – Rear.pdf
│   ├── Idler – Remove – Front.pdf
│   ├── Idler – Remove – Rear.pdf
│   ├── Idler Wheel – Remove and Install.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble – CTL.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble – Final Drive Bench Method.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble.pdf
│   ├── Piston Motor (Hydrostatic) – Assemble – Two Speed.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble – CTL.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble – Final Drive Bench Method.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble.pdf
│   ├── Piston Motor (Hydrostatic) – Disassemble – Two Speed.pdf
│   ├── Piston Motor (Hydrostatic) – Install.pdf
│   ├── Piston Motor (Hydrostatic) – Remove.pdf
│   ├── Piston Pump (Hydrostatic) – Assemble.pdf
│   ├── Piston Pump (Hydrostatic) – Disassemble.pdf
│   ├── Piston Pump (Hydrostatic) – Install.pdf
│   ├── Piston Pump (Hydrostatic) – Remove.pdf
│   ├── Recoil Spring and Track Adjuster – Install.pdf
│   ├── Recoil Spring and Track Adjuster – Remove.pdf
│   ├── Recoil Spring – Assemble.pdf
│   ├── Recoil Spring – Disassemble.pdf
│   ├── Solenoid Valve and Mounting (Parking Brake) – Remove and Install – Two Speed.pdf
│   ├── Sprocket – Remove and Install.pdf
│   ├── System Pressure – Release – Hydraulic.pdf
│   ├── Tire and Rim – Remove and Install.pdf
│   ├── Track – Detension and Tension.pdf
│   ├── Track Drive – Assemble.pdf
│   ├── Track Drive – Disassemble.pdf
│   ├── Track Drive – Install.pdf
│   ├── Track Drive – Remove.pdf
│   ├── Track – Remove and Install.pdf
│   ├── Track Roller – Remove and Install.pdf
│   ├── Track (Rubber) – Detension and Tension.pdf
│   ├── Track (Rubber) – Remove and Install.pdf
│   ├── Track Tensioner – Remove and Install.pdf
│   ├── Undercarriage – Install.pdf
│   ├── Undercarriage – Remove and Install.pdf
│   └── Undercarriage – Remove.pdf
├── UENR0252 – Disassembly & Assembly (259B3 Compact Track Loader & 247B3, 257B3 Multi Terrain Loaders & 216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Systems)
│   ├── Accumulator – Remove and Install.pdf
│   ├── Air Conditioner and Heater – Assemble.pdf
│   ├── Air Conditioner and Heater – Disassemble.pdf
│   ├── Air Conditioner and Heater – Install.pdf
│   ├── Air Conditioner and Heater – Remove.pdf
│   ├── Cab – Install.pdf
│   ├── Cab – Remove.pdf
│   ├── Cab – Tilt.pdf
│   ├── Control Valve (Work Tool) – Assemble.pdf
│   ├── Control Valve (Work Tool) – Disassemble.pdf
│   ├── Control Valve (Work Tool) – Install.pdf
│   ├── Control Valve (Work Tool) – Remove.pdf
│   ├── Coupler Cylinder – Remove and Install.pdf
│   ├── Diverter Valve – Remove and Install.pdf
│   ├── Gas Spring – Remove and Install – Extended Reach.pdf
│   ├── Gear Motor – Assemble.pdf
│   ├── Gear Motor – Disassemble.pdf
│   ├── Gear Motor – Install.pdf
│   ├── Gear Motor – Remove.pdf
│   ├── Gear Pump – Assemble – High Flow.pdf
│   ├── Gear Pump – Assemble.pdf
│   ├── Gear Pump – Disassemble – High Flow.pdf
│   ├── Gear Pump (Implement and Charge) – Assemble.pdf
│   ├── Gear Pump (Implement and Charge) – Disassemble.pdf
│   ├── Gear Pump – Install.pdf
│   ├── Gear Pump – Remove.pdf
│   ├── Hydraulic Tank – Install.pdf
│   ├── Hydraulic Tank – Remove.pdf
│   ├── Lift Arms – Install – Extended Reach Machines.pdf
│   ├── Lift Arms – Install – Radial Arc Machines.pdf
│   ├── Lift Arms – Remove – Extended Reach Machines.pdf
│   ├── Lift Arms – Remove – Radial Arc Machines.pdf
│   ├── Lift Cylinder – Remove and Install – Extended Reach Machines.pdf
│   ├── Lift Cylinder – Remove and Install – Radial Arc Machines.pdf
│   ├── Pilot Operated Hydraulic Control – Assemble.pdf
│   ├── Pilot Operated Hydraulic Control – Disassemble.pdf
│   ├── Pilot Operated Hydraulic Control – Install.pdf
│   ├── Pilot Operated Hydraulic Control – Remove.pdf
│   ├── Quick Coupler – Remove and Install.pdf
│   ├── Refrigerant Accumulator – Remove and Install.pdf
│   ├── Refrigerant Compressor and Support Housing – Remove and Install.pdf
│   ├── Refrigerant Compressor – Remove and Install.pdf
│   ├── Refrigerant Condenser – Remove and Install.pdf
│   ├── Seat – Remove and Install.pdf
│   ├── Solenoid Valve and Mounting (Coupler) – Remove and Install.pdf
│   ├── Solenoid Valve (Compressor Motor) – Remove and Install.pdf
│   ├── System Pressure – Release – Hydraulic.pdf
│   ├── Tilt Cylinder – Remove and Install.pdf
│   └── Window Wiper Motor – Remove and Install.pdf
├── UENR0254 – Schematic (216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loader & 247B3, 257B3 Multi-Terrain Loader & 259B3 Compact Track Loader Electrical System)
│   ├── Collage.pdf
│   └── Main.pdf
├── UENR0255 – Systems Operation (259B3 Compact Track Loader, 247B3, 257B3 Multi Terrain Loaders & 216B3, 26B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Electronic Control System)
│   ├── Electrical Input Components.pdf
│   ├── Electrical Output Components.pdf
│   ├── Electronic Control Module.pdf
│   ├── Features.pdf
│   ├── General Information.pdf
│   └── Location of Electrical Components.pdf
├── UENR0255 – Testing & Adjusting (259B3 Compact Track Loader, 247B3, 257B3 Multi Terrain Loaders & 216B3, 26B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Electronic Control System)
│   ├── Calibration.pdf
│   ├── Electrical Connector – Inspect.pdf
│   ├── Electronic Control Module (ECM) – Flash Program.pdf
│   ├── Electronic Control Module (ECM) – Replace.pdf
│   ├── System Schematic.pdf
│   ├── Wiring Harness (Open Circuit) – Test.pdf
│   └── Wiring Harness (Short Circuit) – Test.pdf
├── UENR0255 – Troubleshooting (259B3 Compact Track Loader, 247B3, 257B3 Multi Terrain Loaders & 216B3, 26B3, 236B3, 242B3, 252B3 Skid Steer Loaders Machine Electronic Control System)
│   ├── Connector Locations.pdf
│   ├── Diagnostic Capabilities.pdf
│   ├── Diagnostic Code List.pdf
│   ├── Emerging Symptom Information.pdf
│   ├── General Information.pdf
│   ├── Indicator Lamp Does Not Illuminate During the Power Up Self Test.pdf
│   ├── Indicator Lamp Is On Continuously.pdf
│   ├── MID 039 – CID 0041 – FMI 03.pdf
│   ├── MID 039 – CID 0041 – FMI 04.pdf
│   ├── MID 039 – CID 0070 – FMI 03.pdf
│   ├── MID 039 – CID 0070 – FMI 04.pdf
│   ├── MID 039 – CID 0110 – FMI 03.pdf
│   ├── MID 039 – CID 0110 – FMI 04.pdf
│   ├── MID 039 – CID 0133 – FMI 04.pdf
│   ├── MID 039 – CID 0133 – FMI 05.pdf
│   ├── MID 039 – CID 0133 – FMI 06.pdf
│   ├── MID 039 – CID 0358 – FMI 03.pdf
│   ├── MID 039 – CID 0358 – FMI 05.pdf
│   ├── MID 039 – CID 0358 – FMI 06.pdf
│   ├── MID 039 – CID 0490 – FMI 03.pdf
│   ├── MID 039 – CID 0490 – FMI 04.pdf
│   ├── MID 039 – CID 0598 – FMI 03.pdf
│   ├── MID 039 – CID 0598 – FMI 05.pdf
│   ├── MID 039 – CID 0598 – FMI 06.pdf
│   ├── MID 039 – CID 0600 – FMI 03.pdf
│   ├── MID 039 – CID 0600 – FMI 04.pdf
│   ├── MID 039 – CID 0681 – FMI 03.pdf
│   ├── MID 039 – CID 0681 – FMI 05.pdf
│   ├── MID 039 – CID 0681 – FMI 06.pdf
│   ├── MID 039 – CID 1076 – FMI 03.pdf
│   ├── MID 039 – CID 1076 – FMI 06.pdf
│   ├── MID 039 – CID 1187 – FMI 04.pdf
│   ├── MID 039 – CID 1188 – FMI 04.pdf
│   ├── MID 039 – CID 1190 – FMI 04.pdf
│   ├── MID 039 – CID 1627 – FMI 04.pdf
│   ├── MID 039 – CID 1627 – FMI 05.pdf
│   ├── MID 039 – CID 1627 – FMI 06.pdf
│   ├── MID 039 – CID 1695 – FMI 04.pdf
│   ├── MID 039 – CID 2204 – FMI 03.pdf
│   ├── MID 039 – CID 2204 – FMI 04.pdf
│   ├── MID 039 – CID 2204 – FMI 08.pdf
│   ├── MID 039 – CID 2211 – FMI 03.pdf
│   ├── MID 039 – CID 2211 – FMI 05.pdf
│   ├── MID 039 – CID 2211 – FMI 06.pdf
│   ├── MID 039 – CID 2212 – FMI 03.pdf
│   ├── MID 039 – CID 2212 – FMI 05.pdf
│   ├── MID 039 – CID 2212 – FMI 06.pdf
│   ├── MID 039 – CID 2473 – FMI 04.pdf
│   ├── Power Supply Circuit of Electronic Control Module.pdf
│   ├── Service Tools.pdf
│   ├── Starting System.pdf
│   ├── Switch Circuits.pdf
│   ├── Symptom Troubleshooting.pdf
│   └── Using Caterpillar Electronic Technician to Determine Diagnostic Codes.pdf
├── UENR2643 – Schematic (216B3, 226B3, 236B3, 242B3, 252B3 Skid Steer Loader & 247B3, 257B3 Multi-Terrain Loader & 259B3 Compact Track Loader Electrical System)
│   ├── Collage.pdf
│   └── Main.pdf
├── UENR3951 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3 Skid Steer Loader, Multi-terrain Loader, Compact Track Loader Hydraulic System)
│   ├── Collage.pdf
│   └── Main.pdf
└── UENR3952 – Schematic (216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3 Skid Steer Loader, Multi-terrain Loader, Compact Track Loader Hydraulic System)
├── Collage.pdf
└── Main.pdf
…