Day: April 21, 2019

INSTANT DOWNLOAD (add to cart)

Hyundai Azera/Grandeur 1998-2016 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1998-2016 Hyundai Azera/Grandeur (Grandeur XG250, XG300, XG350). Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Hyundai Azera/Grandeur 1998-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

Azera – 2006 TG – G 3.8 DOHC
Azera – 2007 TG – G 3.8 DOHC
Azera – 2008 TG – G 3.3 DOHC
Azera – 2009 TG – G 3.3 DOHC
Azera – 2009 TG – G 3.8 DOHC
Azera – 2010 TG – G 3.3 DOHC
Azera – 2010 TG – G 3.8 DOHC
Azera – 2011 TG – G 3.3 DOHC
Azera – 2011 TG – G 3.8 DOHC
Azera – 2012 HG – G 3.3 GDI
Azera – 2013 HG – G 3.3 GDI
Grandeur XG250, XG300, XG350 2003 Electrical Troubleshooting Manual.pdf
Grandeur XG250, XG300, XG350 2003 Shop Manual.pdf

EXCERPT:
2014 ENGINE Cylinder Head Assembly – Azera
Installation
1. Install the CVVT assembly.
Tightening torque: 64.7 ~ 76.5N.m (6.6 ~ 7.8kgf.m, 47.7 ~ 56.4lb-ft)

CAUTION: Install camshaft-inlet to dowel pin of CVVT assembly.
At this time, attend not to be installed to oil hole of camshaftinlet.
Hold the hexagonal head wrench portion of the camshaft with a vise, and install the bolt and CVVT assembly.
Do not rotate CVVT assembly when camshaft is installed to dowel pin of CVVT assembly.

A. A: LH exhaust CVVT
B. B: LH intake CVVT
C. C: RH intake CVVT
D. D: RH exhaust CVVT

NOTE: When installing the CVVT assembly bolt, prevent the camshaft from rotating by using a wrench at position A.

2. Install the timing chain. (Refer to “TIMING CHAIN “)
CAMSHAFT
COMPONENTS AND COMPONENTS LOCATION
REPAIR PROCEDURES
Removal RH
1. Remove the RH bank timing chain. (Refer to “TIMING CHAIN “)
2. Remove the RH exhaust CVVT oil control valve. (Refer to “CVVT OIL CONTROL VALVE (OCV)”
3. Remove the RH camshaft bearing cap (A) and thrust bearing cap (B).
…
XG300: 2001
XG350: 2002-2005

EXCERPT:
2003-05 ENGINES 3.5L V6 – XG350
INTAKE MANIFOLD
COMPONENTS
Fig. 144: Identifying Intake Manifold Components
REMOVAL
1. Remove the air intake hose connected to the throttle body.
Fig. 145: Removing Throttle Body Air Intake Hose
2. Remove the engine coolant hose and throttle body.
3. Remove the P.C.V. hose and brake booster vacuum hoses.
Fig. 146: Removing PCV & Brake Booster Vacuum Hoses
4. Disconnect the vacuum hose connections.
5. Remove the surge tank stay.
Fig. 147: Removing Surge Tank Stay
6. Remove the surge tank.
7. Remove the surge tank and gasket.
Fig. 148: Removing Surge Tank Gasket
8. Disconnect the fuel injector harness connector.
Fig. 149: Disconnecting Fuel Injector Harness Connectors
9. Remove the delivery pipe with the fuel injector and the pressure regulator.
NOTE: When the delivery pipe is removed, be careful not to drop an injector.
Fig. 150: Removing Fuel Delivery Pipe With Fuel Injectors
10. Disconnect the wiring harness of the coolant sensor assembly.
INSPECTION
SURGE TANK AND INTAKE MANIFOLD
1. Check the surge tank and intake manifold for damage, cracking or restriction of the vacuum outlet port, water or gas passages.
2. Check for distortion on the surface using a straight edge and feeler gauge.
Standard value: 0.15 mm (0.006 in.) or less
Service limit: 0.2 mm (0.0078 in.)
INSTALLATION
Install the intake manifold and delivery pipe reversing the order of the removal procedure.
Tightening torque
Intake manifold:
12 ~ 15 Nm (120 ~ 150 kg.cm, 9 ~ 11 lb. ft)
Surge tank stay:
15 ~ 20 Nm (150 ~ 200 kg.cm, 11 ~ 14 lb. ft)
Fig. 151: Intake Manifold Tightening Sequence
Fig. 152: Installing Surge Tank Stay
MUFFLER
COMPONENTS
Fig. 153: Muffler/Exhaust System Components

INSTANT DOWNLOAD (add to cart)

Hyundai Accent 1994-2017 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Hyundai Accent 1994-2017. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Hyundai Accent 1994-2017 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2014 DRIVELINE/AXLES Front Axle Assembly – Accent
Reassembly
1. Install the hub bearing to the knuckle assembly.
1. Lay the knuckle assembly (A) on press.
2. Lay a new hub bearing upon the knuckle assembly (A).
3. Lay a suitable adapter (B) upon the hub bearing.
4. Install the hub bearing to the knuckle assembly by using press.
CAUTION: Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly. Always use a new wheel bearing assembly.

2. Install the dust cover (A).

3. Install the hub assembly to the knuckle assembly.
1. Lay the hub assembly (A) upon a suitable adapter (B).
2. Lay the knuckle assembly (C) upon the hub assembly (A).
3. Lay a suitable adapter (D) upon the hub bearing.
4. Install the hub assembly (A) to the knuckle assembly (C) by using press.
…

INSTANT DOWNLOAD (add to cart)

Hyundai Accent, Atos, Azera, Elantra, Matrix, Santa Fe, Sonata, Terracan, Tiburon, Trajat, Tucson 2000-2006 Factory Service & Shop Manual
Complete workshop & service manual with electrical wiring diagrams for Hyundai Accent, Atos, Azera, Elantra, Matrix, Santa Fe, Sonata, Terracan, Tiburon, Trajat, Tucson 2000-2006. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

Hyundai Accent, Atos, Azera, Elantra, Matrix, Santa Fe, Sonata, Terracan, Tiburon, Trajat, Tucson 2000-2006 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

66MB, bookmarked, Searchable, Printable, high quality PDF

MAKE: Hyundai
MODEL: Accent, Azera, Elantra, Santa Fe, Sonata, Tiburon, Tucson
YEAR: 2006
FORMAT: SWF (Windows, Mac, Linux)
Complete Official Workshop Manuals & Electrical Troubleshooting Manuals; No installation need.

MAKE: Hyundai
YEAR: 2000 2001 2002 2003
MODEL: (’00-’03) Atos, (’98-’01) Accent, (’00-’03) Elantra, (’00-’03) Sonata, (’00-’03) Matrix, (’98-’01) Trajat, (’00-’03) Santa Fe, (’00-’03) Terracan

INSTANT DOWNLOAD (add to cart)

Kia Sportage 1993-2016 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Kia Sportage 1993-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Kia Sportage 1993-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2014 ENGINE Ignition System – 2.4L – Sportage
REPAIR PROCEDURES
ON-VEHICLE INSPECTION
Inspect ignition coil assembly and Perform spark test
I. Check for DTCs.
NOTE: If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC INDEX )
II. Check if sparks occur.
1. Remove the engine cover.
2. Remove the ignition coils.
3. Using a spark plug wrench, remove the spark plugs.
4. Disconnect the injector extension connectors.
5. Ground the spark plug to the engine.
6. Check if sparks occur at each spark plug while engine is being cranked.
…

INSTANT DOWNLOAD (add to cart)

Kia Spectra/Cerato 2000-2009 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Kia Spectra/Cerato 2000-2009. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Kia Spectra/Cerato 2000-2009 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2009 ENGINES Engine Mechanical – Spectra & Spectra5
CYLINDER HEAD ASSEMBLY
COMPONENT
Fig. 85: Identifying Cylinder Head Assembly Components With Torque Specifications (1 Of 2)
Fig. 86: Identifying Cylinder Head Assembly Components With Torque Specifications (2 Of 2)
REMOVAL
NOTE: Engine removal is not required for this procedure.
CAUTION:
Use Fender cover to avoid damaging painted surfaces. To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature before removing it. When handling a metal gasket, take care not to fold the gasket or damage the contact surface of the gasket. To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
Mark all wiring and hoses to avoid misconnection. Inspect the timing belt before removing the cylinder head. Turn the crankshaft pulley so that the No. 1 piston is at top dead center.
1. Disconnect the terminals (A) from battery and remove the heat shield (B).
Fig. 87: Disconnecting Battery Terminals
2. Remove the engine cover.
Fig. 88: Removing/Installing Engine Cover
3. Remove the radiator cap to speed draining.
4. Loosen the radiator drain plug. and drain engine coolant.
5. Remove the intake air hose and air cleaner assembly.
a. Disconnect the MAF connector (A).
b. Disconnect the breather hose (B) from air cleaner hose (D).
c. Remove the intake air hose and air cleaner assembly (C).
Fig. 89: Removing/Installing Engine Cover
6. Remove the upper radiator hose (A) and lower radiator hose (B).
Fig. 90: Locating Upper Radiator Hose And Lower Radiator Hose
7. Remove the heater hoses (A).
Fig. 91: Removing Heater Hoses
8. Remove the accelerator cable (A) by loosening the lock-nut, then slip the cable end out of the throttle linkage.
Fig. 92: Removing Accelerator Cable
9. Remove the engine wire harness connectors and wire harness clamps from the cylinder head and the intake manifold.
1. OCV (Oil control Valve) connector (A).
2. Oil temperature sensor (OTS) connector (B).
3. Engine coolant temperature (ECT) sensor connector (C).
4. Ignition coil connector (D).
…