Day: April 21, 2019

INSTANT DOWNLOAD (add to cart)

Kia Forte 2009-2017 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Kia Forte 2009-2017. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Kia Forte 2009-2017 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

3,096 pages, bookmarked, Searchable, Printable, high quality PDF

EXCERPT:
FORTE(YD) > 2014 > G 1.8 MPI > Automatic Transaxle System
Automatic Transaxle System > Hydraulic System > Description and Operation
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. Automatic Transaxle Fluid (ATF) passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. Transaxle Control Module (TCM) controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.
Automatic Transaxle System > Hydraulic System > Components and Components Location
Components Location
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Kia Cee’d 2006-2017. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

Kia Cee’d 2006-2017 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MAKE: Kia
MODEL: Cee’d
YEAR: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
ENGINE: 2.0 DOHC, 2.0 S C-DSL, 1.6 DOHC C-DS, 1.6 DOHC, 1.4 DOHC…
TRANSAXLE: A4CF1, A4CF2, M5CF1, M5CF2, M5CF3, M6GF2…
LANGUAGE: English
FORMAT: PDF, ISO
1,000+ pages, bookmarked, Searchable, Printable, high quality PDF

EXCERPT:
D 1.6 TCI-U2 > Clutch System > Clutch System > Clutch Master Cylinder > Repair procedures
Removal
1. Separate the push rod (C) after remove the pin (A) and washer (B).
2. Remove the battery and battery tray.
G 1.6 MPI (Refer to Engine Electrical System – “Battery”)
G 1.4 MPI (Refer to Engine Electrical System – “Battery”)
D 1.6 TCI-U2 (Refer to Engine Electrical System – “Battery”)
D 1.4 TCI-U2 (Refer to Engine Electrical System – “Battery”)
G 1.6 GDI (Refer to Engine Electrical System – “Battery”)
G 1.6 T-GDI (Refer to Engine Electrical System – “Battery”)
3. Remove the ECM.
G 1.6 MPI (Refer to Engine Control / Fuel System – “Engine Control Module”)
G 1.4 MPI (Refer to Engine Control / Fuel System – “Engine Control Module”)
D 1.6 TCI-U2 (Refer to Engine Control / Fuel System – “Engine Control Module”)
D 1.4 TCI-U2 (Refer to Engine Control / Fuel System – “Engine Control Module”)
G 1.6 GDI (Refer to Engine Control / Fuel System – “Engine Control Module”)
G 1.6 T-GDI (Refer to Engine Control / Fuel System – “Engine Control Module”)
4. The case of diesel vehicle, remove the fuel filter.
D 1.6 TCI-U2 (Refer to Engine Control / Fuel System – “Fuel Filter”)
D 1.4 TCI-U2 (Refer to Engine Control / Fuel System – “Fuel Filter”)
5. Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
• Do not spill brake
fluid on the vehicle; it may damage the paint if brake fluid does contact
the paint, wash it off immediately with water.
[Gasoline]
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Kia Carnival/Sedona Factory 1999-2009. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Kia Carnival/Sedona Factory 1999-2009 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MAKE: KIA
YEAR: 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
MODEL: Carnival (a.k.a. Sedona)
LANGUAGE: English / German
550MB, 5,000+ pages, bookmarked, Searchable, Printable, high quality PDF

EXCERPT:
REASSEMBLY
1. Wrap tape around the drive shaft splines (UTJ side) to prevent damage to the boots.
2. Apply grease to the joint(BJ) boot on the side of wheel and install the boots.
3. Install the bands to both boots.
4. Using clamp, secure the boot bands.
Clearance (A) : 2.0 mm (0.079 in.) or less
5. To install the dynamic damper, keep the BJ shaft in a straight line and secure the dynamic damper with the dynamic damper bands.
6. Install the UTJ boot bands and UTJ boot.
7. Using the alignment marks (D) made during disassembly as a guide, install the spider assembly (A) and snap ring
…

INSTANT DOWNLOAD (add to cart)

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Kia Carens/Rondo 2006-2017. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Kia Carens/Rondo 2006-2017 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
Automatic Transaxle (F4A51-3/F4A42)
GENERAL
AUTOMATIC TRANSAXLE SYSTEM
AUTOMATIC TRANSAXLE
AUTOMATIC TRANSAXLE CONTROL SYSTEM
SOLENOID VALVE
VFS(VARIABLE FORCE SOLENOID) VALVE
INPUT SPEED SENSOR
OUTPUT SPEED SENSOR
TRANSAXLE OIL TEMPERATURE SENSOR
TRANSAXLE RANGE (TR) SWITCH
SHIFT LEVER

AUTOMATIC TRANSAXLE SYSTEM
DESCRIPTION
The automatic transmission is a combination of 3-element 2-phase 1-stage torque converter and double shaft electrocally-controlled unit which provides 4 speeds forward and 1 reverse. To improve the efficiency of power transmission, the line pressure control was changed applying “Variable Force Solenoid (VFS) valve” on this model.
However, adopting VFS on this model, the line pressure is variably changed according to TPS and the vehicle speed, this will enable more improved efficiency of power transmission and fuel consumption.
CHARACTERISTICS
Some of the characteristics include:
▶Different power transfer
▶Different component layout
▶New shift logic(HIVEC) to improve shift feeling
▶Position of Valve Body
▶Variable shift pattern
▶Communication protocol and method
▶Step gate type shift lever.
…

INSTANT DOWNLOAD (add to cart)

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Kia Borrego 2008-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Kia Borrego 2008-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2009-10 ENGINE Cylinder Block – 4.6L – Borrego + 2010 Canadian
2009-10 ENGINE
Cylinder Block – 4.6L – Borrego + 2010 Canadian
CYLINDER BLOCK
COMPONENTS AND COMPONENTS LOCATION
Components
Fig. 1: Identifying Cylinder Block Components And Components Location With Torque Specifications
REPAIR PROCEDURES
DISASSEMBLY
1. Remove the engine assembly from the vehicle. (Refer to ENGINE AND TRANSAXLE ASSEMBLY ).
2. Install the engine to engine stand for disassembly.
3. Remove the intake manifold and exhaust manifold. (Refer to INTAKE AND EXHAUST SYSTEM – 4.6L ).
4. Remove the cylinder head. (Refer to CYLINDER HEAD ASSEMBLY – 4.6L ).
5. Remove the timing chain. (Refer to TIMING SYSTEM – 4.6L ).
6. Remove the water temperature control assembly. (Refer to COOLING SYSTEM – 4.6L ).
7. Remove the oil pump. (Refer to LUBRICATION SYSTEM – 4.6L ).
8. Remove the adapter plate (A) and the drive plate (B).
Fig. 2: Locating Adapter Plate And Drive Plate
9. Remove the crankshaft adapter (A).
CAUTION:
Use fender covers to avoid damaging painted surfaces.

To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
Mark all wiring and hoses to avoid misconnection.

Inspect the timing chain before removing the cylinder head.

Turn the crankshaft pulley so that the No. 1 piston is at top dead center.

Engine removal is required for this procedure.
Fig. 3: Locating Crankshaft Adapter
10. Remove the cylinder block rear cover (A).
Fig. 4: Locating Cylinder Block Rear Cover
11. Remove the separator (A).
Fig. 5: Locating Separator (1 Of 2)
…