Author: admin

INSTANT DOWNLOAD (add to cart)

Nissan Cube (Z12) 2009-2014 Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Nissan Cube (Z12) 2009-2014. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

MAKE: Nissan
MODEL: Cube (Z12 Series)
YEAR: 2009 2010 2011 2012 2013 2014
FORMAT: PDF (572MB)
TYPE: Service Manual + Owners Manual
LANGUAGE: English

Buy the best manual on the Internet from responsible merchant and get instant download without surprise.

INSTANT Delivery: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

PRINTABLE with Diagrams: Just print the manual out and start to work. You can also use the manual with your laptop in your garage.

Customer SATISFACTION: If there is any problem, just drop a quick email. Within hours the issue shall be taken care of.

REFUND Policy: We sell high quality products only. In case there is any problem with your purchase, a replacement link will be sent to you. If we are at fault, you get 100% refund.

EXCERPT:

REMOVAL AND INSTALLATION
CORROSION PROTECTION
Description
To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in NISSAN production plants. When repairing or replacing body panels, it is necessary to use the same anti-corrosive measures.
Anti-Corrosive Precoated Steel (Galvannealed Steel)
To improve repairability and corrosion resistance, a new type of anticorrosive precoated steel sheet is adopted replacing conventional zinc-coated steel sheet. Galvannealed steel is electroplated and heated to form Zinc-iron alloy, which provides excellent and long term corrosion resistance with cationic electrodeposition primer.
NISSAN genuine parts are fabricated from galvannealed steel. Therefore, it is recommended that NISSAN genuine parts or an equivalent be used for panel replacement to maintain the anti-corrosive performance built into the vehicle at the factory.
Phosphate Coating Treatment and Cationic Electrodeposition Primer
A phosphate coating treatment and a cationic electrodeposition
primer, which provide excellent corrosion protection, are applied to all body components.
CAUTION:
Confine paint removal during welding operation to an absolute
minimum.
NISSAN genuine parts are also treated in the same manner. Therefore, it is recommended that NISSAN genuine parts or an equivalent be used for panel replacement to maintain anti-corrosive performance built into the vehicle at the factory.
Undercoating
The underside of the floor and wheelhouse are undercoated to prevent rust, vibration, noise and stone chipping.
Therefore, when such a panel is replaced or repaired, apply undercoating to that part. Use an undercoating which is rust resistant, soundproof, vibration-proof, shock-resistant, adhesive, and durable.
PRECAUTIONS IN UNDERCOATING
1. Never apply undercoating to any place unless specified (such as the areas above the muffler and three way catalyst that are subjected to heat).
2. Never undercoat the exhaust pipe or other parts that become hot.
3. Never undercoat rotating parts.
4. Apply bitumen wax after applying undercoating.
5. After putting seal on the vehicle, put undercoating on it.

INSTANT DOWNLOAD (add to cart)

Nissan B13 & N14 Series 1990-1995 Factory Service & Shop Manual
Complete workshop & service manual with electrical wiring diagrams for Nissan B13 & N14 Series 1990-1995. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Nissan B13 & N14 Series 1990-1995 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MAKE: Nissan
MODEL: Model (’90-’95) N14 & (’91-’94) B13 Series (a.k.a. Pulsar / Sentra / Sunny)
YEAR: 1990, 1991, 1992, 1993, 1994, 1995

EXCERPT:
REPAIR FOR COMPONENT PARTS
DISASSEMBLY
1. Remove band servo piston snap ring.
2. Apply compressed air to oil hole in transmission case to remove O.D. servo piston retainer and band servo piston assembly.
• Hold band servo piston assembly with a rag.
3. Apply compressed air to oil hole in O.D. servo piston retainer to remove O.D. band servo piston from retainer.
• Hold 0.0. band servo piston while applying compressed air.
…

INSTANT DOWNLOAD (add to cart)

Nissan Axxess (M11) 1990 Factory Service & Shop Manual
Complete workshop & service manual with electrical wiring diagrams for Nissan Axxess (M11) 1990. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Nissan Axxess (M11) 1990 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

QUICK REFERENCE INDEX
GENERAL INFORMATION – GI
MAINTENANCE – MA
ENGINE MECHANICAL – EM
ENGINE LUBRICATION & COOLING SYSTEMS – LC
ENGINE FUEL & EMISSION CONTROL SYSTEM- EF & EC
ENGINE CONTROL, FUEL & EXHAUST SYSTEMS – FE
CLUTCH – CL
MANUAL TRANSAXLE – MT
AUTOMATIC TRANSAXLE – AT
TRANSFER – TF
PROPELLER SHAFT & DIFFERENTIAL CARRIER – PD
FRONT & REAR AXLE – AX
FRONT & REAR SUSPENSION – SU
BRAKE SYSTEM – BR
STEERING SYSTEM – ST
RESTRAINT SYSTEM – RS
BODY & TRIM – BT
AUTOMATIC AIR CONDITIONER – ATC
STARTING & CHARGING SYSTEMS – SC
ELECTRICAL SYSTEM – EL
ALPHABETICAL INDEX – IDX

EXCERPT:
Installation
1. Ensure mating surfaces of cylinder head and block are clean. Install cylinder head and new gasket.
2. Tighten head bolts to 22 ft. lbs. (30 N.m). See Fig. 5. Tighten head bolts to 58 ft. lbs. (79 N.m). Loosen all bolts completely. Tighten head bolts to 22 ft. lbs. (30 N.m). Tighten head bolts to 54-61 ft. lbs. (73-83 N.m).
3. Ensure knockpin is positioned at 12 o’clock in camshaft. Set chain on camshaft by aligning Silver chain mating link to punch mark on cam sprocket. Install camshaft sprocket to camshaft. Install camshaft sprocket bolt and tighten to specification. Remove chain stopper installed during removal.
4. Apply sealant to cylinder head and rubber plug. Install rubber plug. Wipe off excess sealant. To complete installation, reverse removal procedure. Run engine for several minutes, allow engine to cool down and recheck head bolt torque.
PICKUP, 240SX
Removal
1. Release fuel pressure. See FUEL PRESSURE RELEASE in this article. Disconnect negative battery cable. Drain cooling system. Remove power steering pump drive belt. Remove power steering pump, brackets and idler pulley.
2. Label and disconnect necessary electrical wiring and vacuum hoses. Disconnect accelerator cable bracket.
Disconnect EGR tube from exhaust manifold. Remove intake plenum-to-intake manifold bolts.
3. Remove intake manifold-to-cylinder head bolts while raising plenum upward. Remove rocker arm cover.
Bring No. 1 piston to TDC on compression stroke. Loosen camshaft sprocket bolt. Using Chain Support (KV10105800), support timing chain. See Fig. 4. Remove camshaft sprocket.
4. Remove cylinder head-to-engine front cover bolts. Loosen cylinder head bolts in 2 or 3 steps in reverse order of tightening sequence to prevent warping or cracking cylinder head. See Fig. 5. Remove cylinder head.
…

INSTANT DOWNLOAD (add to cart)

Nissan Armada 2004-2015 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 2004-2015 Nissan Armada, Armada LE, Armada Platinum, Armada SE, Armada SE Off Road, Armada SL, Armada SV, Armada Titanium. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 2004-2015 Nissan Armada (TA60 Series) is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

1.7 GB, 10,000+ pages, bookmarked, Searchable, Printable, high quality PDF

EXCERPT:
EXTERIOR LIGHTING SYSTEM
HEADLAMP (HALOGEN TYPE)
SYSTEM DESCRIPTION
System Diagram
System Description INFOID:0000000011288309
Control of the headlamp system operation is dependent upon the position of the combination switch (lighting and turn signal switch). When the combination switch (lighting and turn signal switch) is placed in the 2nd position, the BCM (body control module) receives input requesting the headlamps and park lamps to illuminate.
This input is communicated to the IPDM E/R (intelligent power distribution module engine room) via the CAN communication lines. The CPU (central processing unit) of the IPDM E/R controls the headlamp high and headlamp low relay coils. When energized, these relays direct power to the respective headlamps, which then illuminate.
Component Parts Location
…

INSTANT DOWNLOAD (add to cart)

Nissan Altima 1993-2015 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1993-2015 Nissan Altima, Altima GLE, Altima GXE, Altima Hybrid, Altima S, Altima SE, Altima SE-R, Altima SL, Altima SR, Altima SV, Altima XE. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 1993-2015 Nissan Altima, Altima GLE, Altima GXE, Altima Hybrid, Altima S, Altima SE, Altima SE-R, Altima SL, Altima SR, Altima SV, Altima XE is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

3.8 GB, 10,000+ pages, bookmarked, Searchable, Printable, high quality PDF
Altima (L30 L31 L32 L33 U13)

EXCERPT:
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
SYSTEM – MOONROOF
MOONROOF : System Diagram
MOONROOF : System Description INFOID:0000000012592548
MOONROOF SYSTEM
INPUT/OUTPUT SIGNAL CHART
MOONROOF OPERATION
• Moonroof motor assembly operates with the power supply that is output from BCM while ignition switch is ON or retained power is operating.
• Tilt up/ down & slide open/ close signals from moonroof switch enables moonroof motor to move arbitrarily.
• Moonroof motor assembly receives a vehicle speed signal from combination meter and controls the moonroof motor torque of tilt-down at the time of high speed operation.
AUTO OPERATION
Moonroof AUTO feature makes it possible to slide open and slide close or tilt up and tilt down the moonroof without holding the moonroof switch in the slide open/tilt down or slide close/tilt up position.
RETAINED POWER OPERATION
• Retained power operation is an additional power supply function that enables the moonroof system to operate during the first 45 seconds that the ignition switch is cycled from the ON position to the OFF position.
Retained power function cancel conditions:
• Front door CLOSE (door switch OFF)→OPEN (door switch ON).
• When ignition switch is ON again.
• When timer time passes. (45 seconds)
ANTI-PINCH FUNCTION
The CPU of moonroof motor assembly monitors the moonroof motor operation and the moonroof position (fully-closed or other) by the signals from moonroof motor.
When moonroof motor detects an interruption during the following slide close and tilt down operation, moonroof switch controls the motor for open and the moonroof will operate until full up position (when tilt down operates) or 100 mm (3.94 in) or more in an open direction (when slide close operates):
• Close operation and tilt down when ignition switch is in the “ON” position.
…