1999-2004 Jeep Grand Cherokee (WG/WJ) Workshop Repair & Service Manual (713MB Printable PDF)
Jeep Grand Cherokee (WG_WJ) 1999-2004 – SAMPLE
This quality manual for 1999-2004 Jeep Grand Cherokee (WG/WJ) is 100% complete and intact, no missing/corrupt pages/sections to freak you out! Buy from responsible seller and get instant download now without surprise; this manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.
MAKE: Jeep
— — — — — — — — —
MODEL: Grand Cherokee (WG/WJ)
— — — — — — — — —
YEAR: 1999, 2000, 2001, 2002, 2003, 2004
— — — — — — — — —
FOAMR: PDF (713MB)
This is the same type of official service manual your local dealer will use when doing a repair. This manual for 1999-2004 Jeep Grand Cherokee (WG/WJ) has detailed illustrations as well as step by step instructions. All pages are printable, so run off what you need and take it with you into the garage or workshop. These manuals are your number one source for repair and service information. They are specifically written for the do-it-yourself-er as well as the experienced mechanic. Using this repair manual is an inexpensive way to keep your vehicle working properly. Each manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with photos and illustrations, that guide the reader through each service and repair procedure.
’00 (108MB PDF)
’01 (155MB PDF)
’01 alternate (70MB PDF)
’02 (94MB PDF)
’03 (170MB PDF)
’99 (EN) (60MB PDF)
’99 (ES) (55MB PDF)
EXCERPTS:
ROTOR DEL FRENO DE DISCO DELANTERO
DESMONTAJE
(1) Eleve y apoye el vehículo.
(2) Retire el conjunto de rueda y neumático.
(3) Retire los pernos de anclaje del calibrador (Fig. 32) y retire el calibrador y el anclaje como un conjunto de la articulación de la dirección.
(4) Asegure el calibrador con alambre a una pieza de la suspensión cercana. No permita que la manguera de freno soporte el peso del calibrador.
(5) Retire los retenes que fijan el motor en los espárragos de la maza.
(6) Retire el rotor de la maza….
3.2.2 LINE PRESSURE CONTROL
Proper control of the transmission line pressure is essential for proper operation. The 45RFE/545RFE normally uses closed loop line pressure control, where actual line pressure (reported by the line pressure sensor) is continuously monitored.
The TCM determines the desired (target) line pressure which is required, and adjusts the Pressure Control Solenoid (PCS) until the actual line pressure matches the desired line pressure value. In the event of a line pressure sensor failure DTC P0932(CA), the TCM changes to an open loop control at an essentially constant line pressure…