Audi S5 2007-2016, Audi Q5 2008-2016, Audi A5 2007-2016 Workshop Repair & Service Manual


INSTANT DOWNLOAD (add to cart)

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Audi S5 2007-2016, Audi Q5 2008-2016, Audi A5 2007-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Audi S5 2007-2016, Audi Q5 2008-2016, Audi A5 2007-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:

ENGINE
4.2 Liter – Lubrication – Engine Code(s): CAUA (Coupe)
17 LUBRICATION
GENERAL INFORMATION
ENGINE OIL
Oil capacities, specifications and viscosity classes.
DESCRIPTION AND OPERATION
OIL CHECK VALVE AND SPRAY NOZZLE VALVE OVERVIEW
1. O-ring
Replace
2. Spray Nozzle Valve
Removing and installing, refer to OIL CHECK VALVE AND SPRAY NOZZLE VALVE
3. Gasket
Replace
4. Cover
5. O-ring
6. Hose
For crankcase ventilation
7. Bolt
9 Nm
8. Oil Return Line
9. Bolt
9 Nm
10. Oil Check Valve
Removing and installing, refer to OIL CHECK VALVE AND SPRAY NOZZLE VALVE
11. O-ring
Replace
OIL FILTER HOUSING OVERVIEW
1. Gasket
Replace
2. Bolt
9 Nm
3. Oil Filter Housing
With oil filter bypass valve 1.3 bar
4. Bolt
22 Nm

Depending on the version of the Climatronic control module the currently selected functions will appear only on the Multi Media Interface (MMI) display (“Basis” A/C system) or on the Climatronic control module and on the Multi Media Interface (MMI) display (“Comfort” A/C system). Set the duration of display using the “Adaptation” function in the Climatronic control module Guided Fault Finding using the Vehicle diagnostic tester in “Guided Fault Finding”.
If no malfunction is stored and the Climatronic Control Module is not working, check the adaptation (the function may be switched off by adjusting the function). If necessary, reset the adaptations in all adaptation channels to the manufacturer setting using the Vehicle diagnostic tester in “Guided Fault Finding”.
If there is a condition, where the heating or ventilation of the driver of passenger seat cannot be switched on, this will be stored as a malfunction in the Vehicle Electrical System Control Module -J519-, in the Memory Seat/Steering Column Adjustment Control Module -J136- or in Passenger Memory Seat Control Module -J521- (depending on the vehicle type and the vehicle equipment level). Currently no information is sent to the Climatronic control module display and control head via the data bus system; the DTC memory must be read out in each control unit or in the comfort system central control module -J393- using the Vehicle diagnostic tester in “Guided Fault Finding”. In the event of a complaint regarding seat heating or seat ventilation, first check the event memory of the control modules activating the seat heating and seat ventilation.
From MY 2010, this vehicle has a Start/Stop System for specific engines as optional equipment. On vehicles with Start/Stop system, the Climatronic control module prevents the Stop function. …

HVAC
Air Conditioning (As of 12.2009)
87 AIR CONDITIONING
GENERAL INFORMATION
SAFETY PRECAUTIONS FOR VEHICLES WITH START/STOP SYSTEM

WARNING: On vehicles with the Start/Stop System, the engine could start automatically causing serious personal injury.
If the Start/Stop System is activated (recognizable by a message in
the instrument cluster), it is possible to start the engine
automatically.
Make sure the Start/Stop System is deactivated is deactivated (ignition switched off) whenever working on the vehicle.

GENERAL REPAIR INFORMATION

WARNING: Before working on electrical system (wiring), remove relevant fuse(s).

NOTE: Disconnect Battery before starting electric welding work on vehicle. [For engine (s) CAEB, CALB] Removal and Installation.

The A/C refrigerant system may be drained and opened only if it is for safety reasons, refer to REFRIGERANT SAFETY PRECAUTIONS or if components of the A/C refrigerant system must be replaced, refer to REFRIGERANT CIRCUIT DISCHARGING.
When performing all other usual vehicle repair work, the refrigerant circuit of the A/C system should remain closed.