New Holland CX5080, CX5090, CX6080, CX6090
Complete workshop & service manual with electrical wiring diagrams for New Holland CX5080, CX5090, CX6080, CX6090 Elevation/Laterale/Hillside Combine. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This New Holland CX5080, CX5090, CX6080, CX6090 Elevation/Laterale/Hillside Combine service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
“47824864.pdf”
New Holland CX5080 Elevation / CX5090 Elevation / CX5090 Laterale / CX5090 Hillside / CX6080 Elevation / CX6090 Elevation / CX6090 Laterale Combine Service Manual
Part number 47824864 English February 2015
3,203 pages
SERVICE MANUAL
CX5000 Elevation series Tier IV
CX6000 Elevation series Tier IV
CX5090 Laterale Asia Pacific F4HFE613T*A005
CX5080 Elevation Europe F4HFE613U*A005
CX5090 Elevation Europe F4HFE613T*A005
CX5090 Laterale Middle East Africa F4HFE613T*A005
CX5090 Hillside Europe F4HFE613T*A005
CX5090 Laterale Europe F4HFE613T*A005
CX6090 Laterale Asia Pacific F2CFE613L*A
CX6090 Elevation Europe F2CFE613L*A
CX6090 Laterale Middle East Africa F2CFE613L*A
CX6080 Elevation Europe F4HFE613T*A005
CX6090 Laterale Europe F2CFE613L*A
…
EXCERPT:
Steering – Steering control
Steering column – Remove
1. Pull off the adjusting knob (1). Remove the screws (2) and take the upper cover halves from the steering column.
2. Pull the left-hand side upper cover over the direction indicator lever.
3. Lower the boot (3) to have access to the lower screw of the cover. Remove the two screws (4) of the both lower cover halves.
4. With the covers removed, all internal steering column components can be accessed.
Steering column – Install
1. Position the two lower halves of the steering column covers and install the screws (4). Secure the boot (3) to the lower cover halves.
2. Position the two upper cover halves of the steering column and don’t forget to install the switch (5) and the light indicator (6) between the cover halves.
3. Install and tighten the two screws (2). Install the adjusting knob (1).