Month: December 2015

Fiat 124 Spider 1975-1982 Workshop Repair & Service Manual [COMPLETE & INFORMATIVE for DIY REPAIR] ☆ ☆ ☆ ☆ ☆

---

---

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Fiat 124 Spider 1975-1982 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
LANGUAGE: English
OS: Windows/Mac/Linux

Fiat 124 Spider 1975 1976 1977 1978 1979 1980 1981 1982

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Your Fiat 124 Spider 1975-1982 (ALL MODELS ARE COVERED). All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

EXCERPTS:
TABLE OF CONTENTS
GENERAL INFORMATION
MAINTENANCE
TUNE-UP
ENGINE
CLUTCH
TRANSMISSION
DRIVE SHAFT
REAR AXLE
BRAKES
STEERING SYSTEM
SUSPENSION AND WHEELS
ACCESSORIES
ELECTRICAL
BODY

ASSEMBLY
Install crankshaft. Refer to 101.03. Make sure number on caps is same as number on crankcase. Make sure caps are installed at proper location. Cap without notch is at front of crankcase.
Then cap with one notch, etc.
Install pistons. Refer to Section 101.05.
Install bearing for input shaft in seat in crankshaft rear end.
Fit oil seal in rear cover for crankshaft. Install cover with six bolts and washers.
Rotate crankshaft until crankpins for No. 1 and No. 4 cylinders are at T.D.C. (crankpins should be at top). Position flywheel on crankshaft with index mark facing 1 and 4 crankpins.
Secure flywheel to crankshaft with washer plate and six bolts.
Lock crankshaft against turning. Torque bolts to 105 ft. lbs. (14.5 kgm).
1. Holding tool 2. Socket 3. Bolt 4 . Torque wrench
Lubricate bushings for auxiliary shaft with oil. Install auxiliary shaft.
Secure shaft with retain ing plate, two bolts, and washers.
Place gasket, oil seal and cover (1) on auxiliary shaft (4).
Secure cover with three bolts (3), nut (2) and washers.
Place oil pump drive gear in crankcase. Place spacer on gear.
1. Cover 2. Nut 3. Bolts 4. Auxiliary shaft
Place auxiliary shaft sprocket (1) onto shaft. Rotate auxiliary shaft until gear seats. Secure spacer with clamp, washer and nut.
Place oil pump (2) with pickup tube, gasket and drive gear in crankcase. Start bolts (3) thru pump.
Turn auxiliary shaft while tightening bolts securing oil pump.
Install oil line for breather with two bolts and washers in crankcase. Install oil sump.

---

---

1984-1991 Ferrari Testarossa Workshop Repair & Service Manual [COMPLETE & INFORMATIVE for DIY REPAIR] ☆ ☆ ☆ ☆ ☆

---

---

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for 1984-1991 Ferrari Testarossa is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
OS: Windows/Mac/Linux
LANGUAGE: EN/DE/FR/IT
MAKE: Ferrari
YEAR: 1984 1985 1986 1987 1988 1989 1990 1991
MODEL: Testarossa

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Your 1984-1991 Ferrari Testarossa (ALL MODELS ARE COVERED). All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

EXCERPTS:
Assembling pistons and connecting rods
The pistons have the hole for the gudgeon pin which is off-centre by 0.8 mm with respect to the piston axis; for this reason an arrow 1 (fig. 18) is marked on the piston crown, it indicates the engine rotation.
It is good practice to restore this reference point before disassembling the pistons for overhaul operations.
The gudgeon pins are to be slightly forced into the pistons.
When installing, make sure that the two side retaining rings are correctly positioned in the piston grooves.

When mounting the piston on the connecting rod, pay attention to the following points:
– The number marked on the big end of the connecting rod 2 (fig. 1 8) must be positioned toward the exhaust side (fig. 19).
The arrow on pistons of the RH cylinder block will point away from the number.
– The arrow on pistons of the LH cylinder block will point towards the number.
– When all the pistons are fitted, the arrows on pistons 1 to 6 will be pointing
towards the intake and those on pistons 7 to 12 towards the exhaust.
Before fitting the piston rings, insert them in tool ALZF 8202, making sure they are at right angles to the tool’s inner surface, and check the end clearance is within the values indicated in fig. 16.
– To facilitate the assembling of the rings on the pistons, use a suitable tool. The 1st ring should have the inner beveling uppermost.
– Ensure that “TOP” printed on the piston rings is uppermost
Take special care that the oil scraper ring spring joint does not correspond to the ring slit.

Testing’ the opening pressure
– With the tap closed, clean and bleed the injector with several rapid movements of the lever.
Open the tap and test the opening pressure by moving the lever slowly (approx. 2 seconds per stroke).
If the opening pressure is out of tolerance, replace the injector. Individual valves can also be replaced within a set.
Leakage test Open the tap and allow the pressure to slowly increase up to 0.5 bar below the opening pressure previously determined, and hold it constant at that level. No liquid must leak from the injector in the next 15 seconds.
N.B.: When loosening or tightening the lines to the injectors, always hold the fixed nut with the proper wrench.

---

---

---

---

FERRARI 1994-1999 F355 WORKSHOP REPAIR & SERVICE MANUAL [COMPLETE & INFORMATIVE FOR DIY REPAIR] ☆ ☆ ☆ ☆ ☆

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for FERRARI 1994-1999 F355 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

MAKE: Ferrari
YEAR: 1994 1995 1996 1997 1998 1999
MODEL: F355 (Type F129)
LANGUAGE: English/Italian/German/French
FORMAT: PDF
SIZE/PAGE: 1.4GB/788 pages

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Your FERRARI 1994-1999 F355 (ALL MODELS ARE COVERED). All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

EXCERTPS:
GEARBOX OVERHAULING
— Before disassembling the gearbox parts, check the contact and the engagement clearance of the helical sour gear between pinion and crown wheel.
— Disassemble gearbox parts, wash components in solvent and blow with compressed air.
— Check housing and covers for cracks and ensure that roller bearing seats do not show signs of scoring or wear.
— Check that roller and ball bearings are still working properly. Replace if rolling is rough or noisy.
— Check that teeth profile surfaces are not worn or scratched. Surfaces must appear smooth and reveal uniform contact over the whole faces of the teeth.
— Check that needle bearing races and cages for idle gears on the main and secondary shaft do not show signs of abnormal wear or pitting. The radial clearance should not exceed the maximum value specified in the table.
— Check sleeve and fork grooves for wear. It is important that both fork contact surfaces on the sleeves remain perpendicular to the control rod axis (maximum axial run-out 0.05 mm).
— Inspect the idle gear and spacer working surfaces for signs of wear or seizure.
— Check the drive teeth of sleeves and idle gears for burrs or wear that could make engagement difficult.
Use tool AV 2023 with support arm AM 106155 to hold gearbox housing during assembly.

---

---

Ferrari 550 Maranello 1996-2001 Workshop Repair & Service Manual [COMPLETE & INFORMATIVE for DIY REPAIR] ☆ ☆ ☆ ☆ ☆

---

---

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Ferrari 550 Maranello 1996-2001 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
OS: Windows/Mac/Linux
MAKE: Ferrari
YEAR: 1996 1997 1998 1999 2000 2001
MODEL: 550 Maranello
LANGUAGE: EN/DE/FR/IT

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Your Ferrari 550 Maranello 1996-2001 (ALL MODELS ARE COVERED). All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

EXCERPTS:
ADJUSTMENT OF THE IDLING SPEED
Start the engine, making sure not to accelerate during start-up, and bring the coolant to its operating temperature :
92±2°C (197.5 ± 4.2°F).
Switch the engine off, disconnect the oxygen sensor and the idling speed adjuster.
Start the engine, select the parameter page on the diagnosis system and make sure the rotation speed is 900 rpm.
If the rotation speed isn’t correct, balance and take the engine to the correct speed using the by-pass (Fig. 42, Re. 1) and checking if the TL value (SD 1) and the mercury columns are the same for both cylinder banks.
Considering that the throttle body flowing system has been made correctly in the factory, we deem it unsuitable acting on the throttle stroke adjuster to balance and settle the idle speed (Fig. 42, re. 2) .
Should the adjustment be difficult, act as follows with the by-passes:
1 – Tighten the by-pass adjusters (Fig. 42, re. 1 ).
2 – Bring the idle speed to 850 rpm by balancing both cylinder banks, through the throttle stroke adjusters (Fig. 42, re. 2) .
3 – Open the by-pass adjustment screws balancing both cylinder banks and set the engine at 900 rpm.
4 – If an adjustment is made on the throttle stroke adjuster, you must check and possibly modify the potentiometer adjustment, loosening and turning it (adjustment possibility of approximately 2%): it must be adjusted with absolute angles included between – 1% and 3% (corresponding to 400k600 mV). The maximum difference between these values must not exceed 2.1% (corresponding to 70 mV).
Note: if the idling adjustment is exceeded (i.e. the advance is 4.5″ at idling speed) while adjusting the potentiometers, the throttle stroke screws or the accelerator control cable, switch the engine off (so that the Motronic system doesn’t store wrong data) and repeat the previous procedure.
5 – Check, by means of mercury columns, if both banks are balanced even during progression, increasing speed progressively up to 2,500 rpm. If an adjustment is required, act on the throttle cable adjuster (Fig. 42, re. 7).

Gearbox disassembly from the car
– Place the car on a lifting bridge.
– Put the rear part on two small blocks and remove the rear wheels.
– Remove the complete underbody flatbed.
– Remove the gearbox axle shafts.
– Remove the oxygen sensors.
– Disassemble the central exhaust pipe assembly (catalytic converters, silencers and connecting pipes to rear silencers).
– Remove the gearbox control rod.
– Unscrew the fastening nuts of the engine-gearbox connecting pipe on the clutch housing.
– Unloosen both nuts fastening the gearbox supports.
– Using a column jack, position it under the gearbox assembly and lay the whole unit.
– Make the assembly retract as much as possible and remove it from the chassis with the engine-gearbox connecting pipe.
– Position the gearbox on the stand AS104995 and fasten it to the trolley AV 2023. Disassemble the parts after checking the contact of the bevel gear pair, the pinion pre-load and the inner
parts.
– After detecting the shim of the spacer 13 determining the pinion/crown contact and of the spacer 14 determining the pinion preload, start the gearbox assembly.

---

---

---

INSTANT DOWNLOAD

---

Ferrari 458 Italia 2009-2015 Workshop Repair & Service Manual (COMPLETE & INFORMATIVE for DIY REPAIR) ☆ ☆ ☆ ☆ ☆

* COMPLETE, Absolutely No Missing Pages!
* Official Service INFORMATION You Can Count On!
* Customer Satisfaction GUARANTEED!

This high QUALITY official manual for Ferrari 458 Italia 2009-2015 is 100 percents COMPLETE and INTACT, no MISSING, CORRUPT pages, sections to freak you out! This manual is exactly as described. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices.

FORMAT: PDF
LANGUAGE: English
SIZE/PAGE: 2,012 Pages
OS: Windows/Mac OS X/Linux/Android/iOS

2009 2010 2011 2012 2013 2014 2015 Ferrari 458 Italia

INSTANT DELIVERY: A download link will be sent to you instantly after payment. Simply click on the link and save it to your computer. You can use this Manual as long as you wish with no restrictions.

CUSTOMER SATISFACTION: If there is ANY kind of problem with the item you purchased, just drop a quick email. Within HOURS the issue shall be taken care of.

PRINTABLE MANUAL WITH DIAGRAMS: Just print the manual out and start to work. You can also use the manual with your Tablet/Laptop in your garage.

REFUND/EXCHANGE POLICY: We sell high QUALITY products only. However if you encounter any problems with the item you purchased, another replacement link will be sent to you. If we’re at fault, you will get 100 percents refund.

Buy ☆THE BEST MANUAL ON THE INTERNET☆ from responsible seller and get instant download now without uncertainty or surprise.

This highly detailed workshop service repair manual for download contains virtually everything you will ever need to repair, maintain, rebuild, refurbish or restore Ferrari 458 Italia 2009-2015. All diagnostic and repair procedures and gives you access to the same information that professional technicians and mechanics have. You can view and print out the complete repair procedures with this workshop service repair manual Download – you do not need to be skilled with a computer.

EXCERPTS:
A3.14 Checking Blow-by system pipes and connections
Checking Blow-by system pipes and connections
Check the state of the pipes (1), (2), (3) and the tightness of the relative clamps, around the oil tank and intake ducts.
Check the connections. Replace the relative pipe and/or clamp if any leakage or sweating is noted.
Check the state of the pipes (4) and the tightness of the relative unions on both cylinder heads.
Replace the relative pipe and/or clamp if any leaks are noted.
B3.02 Fuel tank
Removing left hand fuel tank
Disconnect the battery ( F2.01).
Drain the fuel system ( B3.06).
Remove the rear subframe ( E2.02).
Remove the secondary air pump ( F3.12).
Remove the passenger compartment trim panels ( E4.04).
Remove the lower left hand lateral passenger compartment trim panel.
In the passenger compartment, push inwards the cable grommet (1).
Remove from the housing and take out the cap (2).
Disconnect the connector (3).
Disconnect the connector (4).
Undo the screw indicated by the red arrow on the ground cable (5).
Disconnect the pipe (6).
A “double-lock” safety clip is fitted on the union.
To disconnect the “double-lock” quick connector, using due caution and by pressing on both sides,
push the safety clip out of its seat until you hear the “unclick”.
The difference between the safety clip “clicked” and “unclicked” position is only a few millimetres.
Then press on both sides of the quick coupling and remove the pipe (6).
Undo the indicated fasteners. Remove the lower heat shield (7).

E3.12 Flat undertray sections and vehicle lifting
Lifting the vehicle
CAUTION
Before performing any maintenance on vehicles with the Stop&Start system, turn the ignition key to 0.
Before performing any maintenance procedures requiring the ignition key to be in position II on vehicles with the Stop&Start system, deactivate the Stop&Start system with the relative button, ensuring that the specific icon and the message “Stop&Start OFF” are shown on the TFT display, and that the LED on the on/off button itself is off.
Failure to do so may result in serious injury to persons working on the vehicle and in the vicinity of the vehicle in the event of the engine unexpectedly starting.
CAUTION
Failure to observe the operations below may pose a serious risk to the persons working or standing in the vicinity of the vehicle.
Two post vehicle lift
Fit the two front bushings (A) in the position indicated.

---

INSTANT DOWNLOAD

---