13.20 – 3430 – Examination poly V-belt, damage patterns Engine 119 (ra13001193430x)
INSTANT DOWNLOAD
Complete workshop & service manual with electrical wiring diagrams for Mercedes-Benz SL-Class (R129) 300SL, 300SL-24, SL280, SL320, 500SL, SL500, 600SL, SL600 Roadster. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This Mercedes-Benz SL-Class (R129) 300SL, 300SL-24, SL280, SL320, 500SL, SL500, 600SL, SL600 Roadster service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
Mercedes-Benz SL-Class (R129)
300SL, 300SL-24, SL280, SL320, 500SL, SL500, 600SL, SL600
R129 Workshop Service & Repair Manual (250 MB)
R129_SL-Class_Technical_Information (517 MB)
bonus_materials (157 MB)
EXCERPT:
TABLE OF CONTENTS (Exploded View)
├── 00_Overall Vehicle
│ ├── 00.00 – 000 588 03 90 00 Extractor link arm (ws00.00-p-0037b)
│ ├── 00.00 – 000 588 04 90 00 Hose grommet (ws00.00-p-0035b)
│ ├── 00.00 – 000 588 05 80 00 Pit lift (ws00.00-p-0248b)
│ ├── 00.00 – 000 588 05 90 00 Clamping grommet (ws00.00-p-0036b)
│ ├── 00.00 – 000 589 00 21 00 Test box (ws00.00-p-0034b)
│ ├── 00.00 – 000 589 01 10 00 Torx bit set (ws00.00-n-0001z)
│ ├── 00.00 – 000 589 01 40 00 Bracket (ws00.00-p-0244z)
│ ├── 00.00 – 000 589 10 99 00 Tool kit (ws00.00-p-0030z)
│ ├── 00.00 – 000 589 25 33 00 Internal extractor (ws00.00-n-0050z)
│ ├── 00.00 – 000 589 28 33 00 Puller dia. 28-37 mm (ws00.00-n-3026z)
│ ├── 00.00 – 000 589 29 33 00 Internal extractor (ws00.00-n-3027z)
│ ├── 00.00 – 000 589 30 16 00 Hexagon ratchet, 10 mm (ws00.00-p-0002z)
│ ├── 00.00 – 000 589 31 16 00 Hexagon ratchet, 13 mm (ws00.00-p-0003z)
│ ├── 00.00 – 000 589 32 16 00 Hexagon ratchet, 17 mm (ws00.00-p-0004z)
│ ├── 00.00 – 000 589 33 33 00 Counter stay (ws00.00-n-0051z)
│ ├── 00.00 – 000 589 35 33 00 Countersupport (ws00.00-n-3033z)
│ ├── 00.00 – 000 589 40 37 00 Clamp (ws00.00-n-0005z)
│ ├── 00.00 – 000 589 40 37 00 Clamp (ws00.00-p-0005z)
│ ├── 00.00 – 000 589 49 98 00 Oil sample container (ws00.00-p-0263b)
│ ├── 00.00 – 000 589 54 37 00 Clamp (ws00.00-p-0006z)
│ ├── 00.00 – 000 589 65 33 00 Puller (ws00.00-p-0007z)
│ ├── 00.00 – 000 589 67 21 00 Torque wrench (ws00.00-p-0008z)
│ ├── 00.00 – 000 589 68 33 00 Internal extractor (ws00.00-n-3030z)
│ ├── 00.00 – 000 589 75 03 00 Box wrench bit (ws00.00-p-0009z)
│ ├── 00.00 – 000 589 76 03 00 Box wrench (ws00.00-p-0010z)
│ ├── 00.00 – 000 589 87 33 00 Gripper (ws00.00-n-3054z)
│ ├── 00.00 – 000 589 89 33 00 Puller (ws00.00-n-3022z)
│ ├── 00.00 – 001 589 00 16 00 Adapter coupling (ws00.00-p-0120z)
│ ├── 00.00 – 001 589 03 91 00 Set of protective covers (ws00.00-p-3069b)
│ ├── 00.00 – 001 589 51 21 00 Torque wrench (ws00.00-p-0012z)
│ ├── 00.00 – 001 589 53 21 00 Dial gage (ws00.00-n-0013z)
│ ├── 00.00 – 001 589 66 21 00 Torque wrench (ws00.00-n-0015z)
│ ├── 00.00 – 001 589 67 21 00 Torque wrench (ws00.00-n-0016z)
│ ├── 00.00 – 001 589 72 21 00 Torque wrench (ws00.00-p-0017z)
│ ├── 00.00 – 001 589 73 21 00 Hand vacuum pump (ws00.00-p-0018z)
│ ├── 00.00 – 001 589 74 21 00 Torque wrench (ws00.00-n-0019z)
│ ├── 00.00 – 001 589 75 21 00 Torque wrench (ws00.00-n-3049b)
│ ├── 00.00 – 001 589 76 09 00 External torx set (ws00.00-n-0020z)
│ ├── 00.00 – 001 589 81 09 00 Set of flexible head wrenches (ws00.00-p-0251b)
│ ├── 00.00 – 001 589 81 21 00 Torque screwdriver (ws00.00-n-0021z)
│ ├── 00.00 – 001 589 87 21 00 Torque wrench (ws00.00-p-0119z)
│ ├── 00.00 – 003 589 05 09 00 Torque tool set (ws00.00-n-0261a)
│ ├── 00.00 – 003 589 06 09 00 Plug-in wrench (ws00.00-p-0262a)
│ ├── 00.00 – 00 – Overview of test descriptions Diagnosis – Climate control Models 129, 140, 170, 202 ,210 (dh0000pk0up00x)
│ ├── 00.00 – 00 – Overview of test descriptions Diagnosis – Gasoline engine Engines 102, 103, 104, 111, 116, 117, 119, 120 (dh0000pm0up00x)
│ ├── 00.00 – 00 – Overview of test descriptions Diagnosis – Information_Communication Models 124, 129, 140, 170, 202, 210 (dh0000pi0up00x)
│ ├── 00.00 – 00 – Preface Diagnosis Manual Models 124, 129, 140, 170, 201, 202, 210 (dh0000p00vt00x)
│ ├── 00.00 – 00 – Summary of test descriptions Diagnosis – Body Models 124, 129, 140, 163, 168, 170, 202, 208, 210 (dh0000pa0up00x)
│ ├── 00.00 – 00 – Survey of test descriptions Diagnosis Chassis Models 124, 129, 140, 170, 202, 210 (dh0000pf0up00x)
│ ├── 00.00 – 00 – Use of Diagnosis Manual Diagnosis – Gasoline engine Engines 102, 103, 104, 111, 116, 117, 119, 120 (dh0000pm0an00x)
│ ├── 00.00 – 00 – Use of the diagnosis manual Diagnosis; Chassis – Body – Climate control – Information_Communication Models 124, 129, 140, 170, 201, 202, 210 (dh0000p00an00x)
│ ├── 00.00 – 100 589 02 59 00 Adapter (ws00.00-p-0022z)
│ ├── 00.00 – 110 589 03 59 00 Mounting wedge (ws00.00-p-0274k)
│ ├── 00.00 – 112 589 00 25 00 Squeeze gun (ws00.00-p-0052z)
│ ├── 00.00 – 116 589 02 07 00 Screwdriver, 5 mm (ws00.00-n-0023z)
│ ├── 00.00 – 116 589 03 07 00 T-handle Allen wrench (ws00.00-p-0024z)
│ ├── 00.00 – 117 589 02 07 00 Pin box wrench (ws00.00-p-0054z)
│ ├── 00.00 – 123 589 00 16 00 Extension (ws00.00-p-0025z)
│ ├── 00.00 – 123 589 02 09 00 Socket (ws00.00-p-0026z)
│ ├── 00.00 – 123 589 02 10 00 Allen wrench socket (ws00.00-p-0027z)
│ ├── 00.00 – 123 589 03 09 00 Socket (ws00.00-p-0028z)
│ ├── 00.00 – 163 589 03 43 00 Press (ws00.00-p-0057z)
│ ├── 00.00 – 198 589 00 09 00 Flexible head wrench socket (ws00.00-p-0032z)
│ ├── 00.00 – 210 589 00 71 00 Hand pump (ws00.00-p-0280z)
│ ├── 00.00 – 220 589 05 99 00 Electrical connection kit (ws00.00-p-0279z)
│ ├── 00.00 – 363 589 02 21 00 Dial indicator holder (ws00.00-p-0033z)
│ ├── 00.00 – Collection and disposal of components containing mercury (os00.00-p-1000zz)
│ ├── 00.00 – Connecting and using test equipment (ad00.00-p-1000az)
│ ├── 00.00 – Forms Passenger cars Overall vehicle – – of00.00-z-3999az)
│ ├── 00.00 – Scrapping gas-filled hydraulic components (os00.00-p-2000zz)
│ ├── 00.00 – Service Information Exclusion of liability for third-party retrofits (si00.00-p-0025a)
│ ├── 00.00 – Service Information Identification of fine dust badge for vehicles not registered in Germany (si00.00-p-0082a)
│ ├── 00.00 – Service information Important notes on the use of various vehicle systems and components (si00.00-p-0500a)
│ ├── 00.00 – Service information New damage code (si00.00-z-0038a)
│ ├── 00.00 – Service information New update concept for diagnosis applications (si00.00-z-0004a)
│ ├── 00.00 – Service Information Operation items for test drives (si00.00-p-0009a)
│ ├── 00.00 – Service Information Processing of warranty and goodwill claims (si00.00-p-0116a)
│ ├── 00.00 – Service Information QR code for rescue forces (si00.00-p-0089a)
│ ├── 00.00 – Sheet of drawings on paint damage Passenger cars, Model des. 129, 140, 202, 210 (wb6516lit7423z)
│ ├── 00.00 – Tightening torques Passenger cars Overall vehicle (ba00.00-z-9999az)
│ ├── 00.01 – Certificates (of00.01-z-1999zz)
│ ├── 00.01 – Forms (of00.01-z-3999zz)
│ ├── 00.01 – Function group overview, engine (ov00.01-z-1904a)
│ ├── 00.01 – Function group survey, body (ov00.01-z-1906a)
│ ├── 00.01 – Information for the user (ov00.01-z-0100zz)
│ ├── 00.01 – Introduction of WIS Service Media (sn00.01-z-0012a)
│ ├── 00.01 – Overall vehicle model and major assembly installation overview (ov00.01-z-0150az)
│ ├── 00.01 – Overview of function groups, chassis (ov00.01-z-1905a)
│ ├── 00.01 – Search aid for electrical components (ov00.01-z-1800a)
│ ├── 00.01 – Service Information Content and application of data mediums Telematics CD_DVD, Regio DVD and Digital Owner342200230s Manual DVD (si00.01-p-0014a)
│ ├── 00.01 – Service Information Damage or breakdown case in international traffic (si00.01-z-0031a)
│ ├── 00.01 – Service Information Invoicing of quick test (si00.01-p-0006a)
│ ├── 00.01 – Service Information Modification of battery maintenance (si00.01-p-0013a)
│ ├── 00.01 – Service Information SDconnect rechargeable battery (si00.01-p-0003a)
│ ├── 00.01 – Service Information Structure of the new operation numbers for SmallRepair in ASRA [operation texts, standard texts, flat rates and work units] (si00.01-z-0001a)
│ ├── 00.01 – Service Information Synonym search – New functionality in WIS (si00.01-z-0036a)
│ ├── 00.01 – Service Information Trouble diagnosis bulletins (AF) publication type not applicable (si00.01-z-0029a)
│ ├── 00.01 – Service Information WIS Service Media (si00.01-z-0012a)
│ ├── 00.01 – Service-Information Xentry Support & Feedback in WIS net (si00.01-z-0030a)
│ ├── 00.01 – Summaries (ov00.01-z-0102zz)
│ ├── 00.01 – Survey of function groups – overall vehicle (ov00.01-z-1903a)
│ ├── 00.01 – Terminology (ov00.01-z-0104zz)
│ ├── 00.10 – Check gear capacity (ar00.10-p-1010a)
│ ├── 00.10 – Complete vehicle, model_component installation survey, build condition (gf00.10-p-0801b)
│ ├── 00.10 – Contents retrofitting and converting special equipment (an00.10-p-1000dz)
│ ├── 00.10 – Service information on increase of engine performance (si00.10-p-0004a)
│ ├── 00.10 – Service Information Vehicle identification plate orders (si00.10-p-0003b)
│ ├── 00.10 – Table of contents for subsequent installation and conversion of accessories (az00.10-p-1000mz)
│ ├── 00.19 – 000 589 13 99 00 Wiring harness repair kit, basic (ws00.19-p-0007b)
│ ├── 00.19 – 220 589 01 99 00 Wiring harness repair kit (ws00.19-p-0009b)
│ ├── 00.19 – 220 589 02 99 00 Wiring harness repair kit (ws00.19-p-0002b)
│ ├── 00.19 – 220 589 03 99 00 Positioning mount with quick-release fitting (ws00.19-p-0003b)
│ ├── 00.19 – 220 589 04 99 00 Wiring harness repair kit, supplement (ws00.19-p-0006b)
│ ├── 00.19 – 930 589 00 99 00 Wiring harness repair kit, supplement (ws00.19-n-0004b)
│ ├── 00.19 – General repair methods for wiring harness (ar00.19-p-0100a)
│ ├── 00.19 – Performing basic programming (ar00.19-p-0200a)
│ ├── 00.19 – Removing contacts from plugs and connectors (ar00.19-p-0120a)
│ ├── 00.19 – Repair wiring harness as per specified repair method (ar00.19-p-0001a)
│ ├── 00.20 – 0006 – Overview, model, work sheet, order no. Models 107 from 8_85, 124_129_140 to 6_93, 126 from 9_85, 201 from 1_85, 123 (wh0000pkwvt06x)
│ ├── 00.20 – 0053 – Visual inspection for missing components, leakage assemblies, chafing points, line position Models; 107 from 08_85, 124, 126 from 09_85, 129, 140, 201 from 01_85 (wh0053pkw0000x)
│ ├── 00.20 – 0090 – Checking chassis and supporting body components for damage and corrosion Models 107 from 8_85, 124, 129, 140 to 6_93, 126 from 9_85, 201 from 1_85, 123 (wh0090pkw0000x)
│ ├── 00.20 – 1st care service 10000 – 12500 km, additional between the maintenance services every 10000 km_annually (ap00.20-p-1220a)
│ ├── 00.20 – Active service system (ASSYST) function description contents (gf00.20-p-0997az)
│ ├── 00.20 – Check all visible parts for leaks and damage (ap00.20-p-0053ba)
│ ├── 00.20 – Inspect chassis and load-bearing body parts for damage and corrosion (ap00.20-p-0090ba)
│ ├── 00.20 – Inspection 1,000 – 5,000km_600 – 3,000 miles Models 124 up to 06_93; 129 up to 06_93; 140 up to 06_93; 201 (by Model 201.03 inspection at 1,000 – 1,500km_600 – 900 miles) (wb981cpkw0069z)
│ ├── 00.20 – Inspection service every 15000 km_annually (ap00.20-p-0013a)
│ ├── 00.20 – Maintenance (ap00.20-p-0000a)
│ ├── 00.20 – Maintenance (ap00.20-p-0000c)
│ ├── 00.20 – Maintenance (ap00.20-p-0000d)
│ ├── 00.20 – Maintenance service Every 20,000 km _12,000 miles _ 2 years Models 107 from 08_85, 124, 129, 140 to 06_93, 126 from 09_85, 201 from 01_85 (wb980epkw0070z)
│ ├── 00.20 – Maintenance service every 20 000 km_2 years (ap00.20-p-0005b)
│ ├── 00.20 – Maintenance service every 30 000 km_2 years (ap00.20-p-0014a)
│ ├── 00.20 – Service Information Filling of AdBlue during service (si00.20-p-0004a)
│ ├── 00.20 – Service Information Forms for delivery and hand-over inspections, inspections and checks in information type AP (si00.20-p-0044a)
│ ├── 00.20 – SERVICE SHEET for Active Service System (ASSYST) (ap00.20-p-0001d)
│ ├── 00.40 – Directory of additional operating fluids (bb00.40-p-0300zz)
│ ├── 00.40 – General list (bb00.40-p-0000zz)
│ ├── 00.40 – List of fuels (bb00.40-p-0100zz)
│ ├── 00.40 – List of lubricants (bb00.40-p-0200zz)
│ ├── 00.40 – Search aid for Specifications for Operating Fluids (bb00.40-p-0900a)
│ ├── 00.40 – Service Information bulletin Specifications for Operating Fluids for automatic transmission (si00.40-p-0014a)
│ ├── 00.40 – Service information Dying of windshield washer fluid concentrate (si00.40-z-0006a)
│ ├── 00.40 – Service Information Exclusive use of Mercedes-Benz lubricants in warranty and goodwill cases (si00.40-p-0009a)
│ ├── 00.40 – Service information on specifications for service products (si00.40-p-0004b)
│ ├── 00.40 – Service information on specifications for service products (si00.40-p-0004c)
│ ├── 00.45 – Auxiliary repair materials (br00.45-z-0999zz)
│ ├── 00.45 – Service Information Multipurpose metal grease (si00.45-p-0004a)
│ └── 00.45 – Service Information Service kit for rectifying squeaking, creaking and tearing noises (si00.45-p-0002a)
├── 01_Complete Engine, Crankcase Ventilation, Cylinder Head, Crankcase
│ ├── 01.00 – 000 588 00 31 00 Assembly stand (ws01.00-n-3028b)
│ ├── 01.00 – 000 588 00 62 00 Load tilter (ws01.00-p-0102b)
│ ├── 01.00 – 000 588 01 21 00 Endoscope (ws01.00-p-0097b)
│ ├── 01.00 – 000 588 03 62 00 Lifting platform (ws01.00-p-0091a)
│ ├── 01.00 – 000 588 04 62 00 Removal fixture (ws01.00-n-3014b)
│ ├── 01.00 – 000 588 09 62 00 Engine support fixture (ws01.00-p-0094b)
│ ├── 01.00 – 000 588 11 62 00 Major assembly mount (ws01.00-p-0092b)
│ ├── 01.00 – 000 589 01 25 00 Hand pressure gun (ws01.00-n-3060b)
│ ├── 01.00 – 0010 – Engine and model survey Engine 119.96 KE, 119.97 LH 119.98 ME (ra01001190010x)
│ ├── 01.00 – 001 589 00 91 00 Set of protective covers (ws01.00-n-0110b)
│ ├── 01.00 – 001 589 01 91 00 Set of protective covers (ws01.00-p-0111b)
│ ├── 01.00 – 001 589 02 91 00 Set of protective covers (ws01.00-n-0112b)
│ ├── 01.00 – 001 589 76 21 00 Compression tester (ws01.00-p-0004a)
│ ├── 01.00 – 001 589 77 21 00 Compression recorder (ws01.00-p-0005a)
│ ├── 01.00 – 003 589 03 37 00 Hose clamp pliers (ws01.00-p-0113b)
│ ├── 01.00 – 0080 – Hazard warnings when the hood is opened Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190080x)
│ ├── 01.00 – 102 589 00 99 00 HELI-COIL repair set (ws01.00-n-0009c)
│ ├── 01.00 – 111 589 00 91 00 Connector (ws01.00-n-0018b)
│ ├── 01.00 – 111 589 12 31 00 Support (ws01.00-p-0021c)
│ ├── 01.00 – 117 589 00 98 00 Cover sleeves (ws01.00-p-0023c)
│ ├── 01.00 – 119 589 00 10 00 Socket (ws01.00-p-0026b)
│ ├── 01.00 – 119 589 00 14 00 Sleeves (ws01.00-p-0027c)
│ ├── 01.00 – 119 589 01 40 00 Retaining bracket (ws01.00-p-0029c)
│ ├── 01.00 – 119 589 04 15 00 Drift punch (ws01.00-p-0051c)
│ ├── 01.00 – 452 589 01 99 00 Repair tools for valves (ws01.00-p-0108c)
│ ├── 01.00 – 601 589 00 10 00 Screwdriver bit (ws01.00-p-0033b)
│ ├── 01.00 – 617 589 00 10 00 Screwdriver bit (ws01.00-n-0046b)
│ ├── 01.00 – Cleaning and preserving engine and engine compartment (ap01.00-p-1000zz)
│ ├── 01.00 – Forms Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase – – of01.00-z-3999az)
│ ├── 01.00 – Technical modifications Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase (bt01.00-z-9999az)
│ ├── 01.00 – Test and adjustment values Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase – – be01.00-z-9999az)
│ ├── 01.00 – Tightening torques Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase – – ba01.00-z-9999az)
│ ├── 01.10 – 0100 – Testing the compression pressure Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190100x)
│ ├── 01.10 – 0101 – Engine oil and filter change Models; 107 from 8_85, 124, 129, 140 to 6_93, 126 from 9_85, 201 from 1_85, 123 All engines (wh0101pkw0000x)
│ ├── 01.10 – 0150 – Testing cylinders for leaks Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190150x)
│ ├── 01.10 – 0200 – Inspecting cylinders with light probe, assessing cylinders Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190200x)
│ ├── 01.10 – 0300 – A. Removing and installing engine Models 124, 129, 140 Engines 119.96 119.97, and 119.98 (ra0100119a300x)
│ ├── 01.10 – 0400 – Function description of the crankcase ventilation Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190400x)
│ ├── 01.10 – 2130 – Removal and installation of the driver on camshaft Engine 119 (ra01001192130x)
│ ├── 01.10 – 2240 – Checking rear of engine for leaks, with engine running Engine 119 Transmission 722.3 (ra01001192240x)
│ ├── 01.10 – 4070 – Repair of the spark plug threads Engine 119 (ra01001194070x)
│ ├── 01.10 – Service Information Cleaning sealing surfaces (si01.10-p-0004a)
│ ├── 01.10 – Technical modifications Engine Removal_installation of engine, crankcase, cylinder head, crankcase ventilation Engine 119 (ra0100119ta00x)
│ ├── 01.20 – 0500 – Removal and installation of the cylinder head covers Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190500x)
│ ├── 01.20 – 1000 – Notes on crankcase Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191000x)
│ ├── 01.30 – 4000 – Notes on cylinder heads Engines 119.970_971_972_974_975 (ra01001194000x)
│ ├── 01.30 – 4150 – Removal and installation of the cylinder head A. Models 124, 140, 210, B. Model 129 Engine 119.960 (ra01001194150x)
│ ├── 01.30 – 4180 – Checking the cylinder head mating surface, facing Engine 119 (ra01001194180x)
│ ├── 01.40 – 1100 – Installing cylinder liners Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191100x)
│ ├── 01.40 – 1120 – Measuring, honing, and silicon lapping cylinder bores Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191120x)
│ ├── 01.40 – 1200 – Facing crankcase mating surface Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191200x)
│ ├── 01.40 – 2100 – Removal and installation of the timing case cover A. Engine 119.960 KE, B. Engine 119.97_98 LH_ME (ra01001192100x)
│ ├── 01.40 – 2120 – Removal and installation of the front covers at the top A. Eng. 119.960 in Model 129, B. Eng. 119.97, C. Eng. 119.98 in Model 210 (ra01001192120x)
│ ├── 01.40 – 2140 – Replacement of radial shaft seals in front covers at the top Engine 119.96_97 with front cover installed and removed (ra01001192140x)
│ ├── 01.40 – 2220 – Removal and installation of the end cover Engine 119 (ra01001192220x)
│ └── 01.40 – Service Information on assessing cylinder contact surfaces (si01.40-p-0001a)
├── 03_Crank Assembly
│ ├── 03.00 – 000 589 04 14 00 Tensioning strap (ws03.00-p-0001c)
│ ├── 03.00 – 000 589 20 21 00 Hardness tester (ws03.00-p-0002c)
│ ├── 03.00 – 000 589 51 37 00 Pliers (ws03.00-p-0005c)
│ ├── 03.00 – 001 589 65 09 00 Socket wrench bit (ws03.00-p-0006b)
│ ├── 03.00 – 103 589 00 33 00 Puller (ws03.00-p-0013b)
│ ├── 03.00 – 116 589 01 40 00 Retaining lock (ws03.00-p-0017c)
│ ├── 03.00 – 116 589 17 21 00 Gauge pin (ws03.00-p-0019c)
│ ├── 03.00 – 117 589 00 43 00 Installation tool (ws03.00-p-0020b)
│ ├── 03.00 – 119 589 00 21 00 Locating tool (ws03.00-p-0021c)
│ ├── 03.00 – 119 589 01 14 00 Sleeve (ws03.00-p-0022b)
│ ├── 03.00 – 3450 – Checking and correcting the setting of the TDC sensor Engine 119 (ra03001193450x)
│ ├── 03.00 – 5000 – Removal and installation of the crankshaft_ring gear retaining lock A. Transmission installed, B. Transmission removed Engine 119 (ra03001195000x)
│ ├── 03.00 – 615 589 01 33 00 Puller (ws03.00-p-0030c)
│ ├── 03.00 – 617 589 00 16 00 Square drive (ws03.00-p-0032b)
│ ├── 03.00 – Technical modifications Crank assembly Engine 119 (ra0300119ta00x)
│ ├── 03.00 – Technical modifications Passenger cars Crank assembly (bt03.00-z-9999az)
│ ├── 03.00 – Test and adjustment values Passenger cars Crank assembly (be03.00-z-9999az)
│ ├── 03.00 – Tightening torques Passenger cars Crank assembly – – ba03.00-z-9999az)
│ ├── 03.10 – 3100 – Checking, replacing and tightening conrad bolts Engine 119 (ra03001193100x)
│ ├── 03.10 – 3130 – Repair and alignment of the conrod Engine 119 (ra03001193130x)
│ ├── 03.10 – 3160 – Removal and installation of pistons Engine 119 (ra03001193160x)
│ ├── 03.10 – 3165 – Pistons, matching and dimensions Engine 119 (ra03001193165x)
│ ├── 03.10 – 3170 – Replacement of piston rings Engine 119 (ra03001193170x)
│ ├── 03.20 – 3200 – Mounting crankshaft in bearings A. Engine 119.96_97 with fit bearing Engines 119.96, 119.97, 119.98 (ra030a1193200x)
│ ├── 03.20 – 3200 – Mounting crankshaft in bearings B. Engine 119.97_98 with thrust washers Engines 119.96, 119.97, 119.98 (ra030b1193200x)
│ ├── 03.20 – 3240 – Replacement of the crankshaft front radial seal Engine 119 (ra03001193240x)
│ ├── 03.20 – 3270 – Replacement of the crankshaft rear radial seal Engine 119 (ra03001193270x)
│ ├── 03.30 – 3420 – Removal and installation of vibration damper_hub belt pulley A. Engine 119.960 (119.97 up to 08_94) B. Engine 119.97_98 from 08_94 (ra03001193420x)
│ ├── 03.30 – 4100 – Removal and installation of the driven plates A. Engine 119.960_97, B. Engine 119.98 (ra03001194100x)
│ ├── 03.30 – 4300 – Replacement of the ring gear Engine 119 (ra03001194300x)
│ └── 03.30 – 4350 – Adjusting clearance of ring gear to starter Engine 119 (ra03001194350x)
├── 05_Engine Timing
│ ├── 05.00 – 000 589 10 53 00 Reamer (ws05.00-n-0001c)
│ ├── 05.00 – 000 589 10 68 00 Cylinder brush (ws05.00-p-0002c)
│ ├── 05.00 – 000 589 21 53 00 Reamer (ws05.00-n-0005c)
│ ├── 05.00 – 000 589 58 43 00 Installation tool (ws05.00-n-0006c)
│ ├── 05.00 – 102 589 00 23 00 Drift (ws05.00-n-0008c)
│ ├── 05.00 – 102 589 00 34 00 Threaded bolt (ws05.00-p-0009b)
│ ├── 05.00 – 102 589 01 23 00 Feeler gauge (ws05.00-p-0012c)
│ ├── 05.00 – 102 589 01 53 00 Reamer (ws05.00-p-0013c)
│ ├── 05.00 – 102 589 03 40 00 Magnet (ws05.00-n-0023a)
│ ├── 05.00 – 103 589 02 15 00 Staged drift (ws05.00-n-0042c)
│ ├── 05.00 – 103 589 03 15 00 Staged drift (ws05.00-n-0043c)
│ ├── 05.00 – 104 589 00 15 00 Drift punch (ws05.00-p-0044c)
│ ├── 05.00 – 104 589 00 23 00 Plug gauge (ws05.00-p-0045c)
│ ├── 05.00 – 104 589 00 53 00 Reamer (ws05.00-p-0046c)
│ ├── 05.00 – 104 589 01 15 00 Drift punch (ws05.00-p-0048c)
│ ├── 05.00 – 104 589 01 43 00 Drift (ws05.00-n-0049b)
│ ├── 05.00 – 104 589 01 53 00 Broach (ws05.00-p-0050c)
│ ├── 05.00 – 104 589 01 63 00 Guide sleeve (ws05.00-p-0051c)
│ ├── 05.00 – 111 589 01 40 00 Thrust nut (ws05.00-p-0068c)
│ ├── 05.00 – 111 589 02 15 00 Drift (ws05.00-p-0070c)
│ ├── 05.00 – 111 589 02 59 00 Assembly board (ws05.00-n-0071c)
│ ├── 05.00 – 111 589 03 15 00 Retaining pins (ws05.00-n-0072b)
│ ├── 05.00 – 111 589 18 61 00 Lever pusher (ws05.00-n-0073b)
│ ├── 05.00 – 111 589 25 61 00 Valve assembly tools kit (ws05.00-p-3137ba)
│ ├── 05.00 – 112 589 09 63 00 Assembly inserts (ws05.00-p-0165c)
│ ├── 05.00 – 116 589 01 34 00 Threaded bolt (ws05.00-n-0083b)
│ ├── 05.00 – 116 589 02 34 00 Threaded bolt (ws05.00-n-0086b)
│ ├── 05.00 – 116 589 06 63 00 Magnetic rod (ws05.00-p-0088b)
│ ├── 05.00 – 116 589 20 33 00 Impact extractor (ws05.00-n-0089b)
│ ├── 05.00 – 117 589 03 23 00 Drift (ws05.00-n-0093c)
│ ├── 05.00 – 119 589 00 01 00 Double open end wrench (ws05.00-p-0097b)
│ ├── 05.00 – 119 589 00 43 00 Drift (ws05.00-n-0098b)
│ ├── 05.00 – 119 589 00 53 00 Reamer (ws05.00-p-0151c)
│ ├── 05.00 – 119 589 01 53 00 Broaching tool (ws05.00-p-0152c)
│ ├── 05.00 – 119 589 01 63 00 Clip remover (ws05.00-p-0099b)
│ ├── 05.00 – 119 589 02 15 00 Drift punch (ws05.00-p-0100c)
│ ├── 05.00 – 119 589 05 63 00 Guide sleeve (ws05.00-p-0153c)
│ ├── 05.00 – 119 589 06 63 00 Thrust piece (ws05.00-p-0101b)
│ ├── 05.00 – 210 589 00 40 00 Magnetic pin (ws05.00-n-0155b)
│ ├── 05.00 – 2110 – Examining and replacing hydraulic valve clearance compensating elements (bucket tappets) Engine 119 (ra05001192110x)
│ ├── 05.00 – 271 589 00 59 00 Assembly tool (ws05.00-p-0202c)
│ ├── 05.00 – 602 589 00 39 00 Riveting tool (ws05.00-p-0162c)
│ ├── 05.00 – 602 589 00 98 00 Case (ws05.00-p-0158c)
│ ├── 05.00 – 602 589 02 33 00 Chain separating tool (ws05.00-p-0159c)
│ ├── 05.00 – 602 589 02 40 00 Assembly links (ws05.00-p-0171c)
│ ├── 05.00 – 602 589 05 63 00 Pressure screw (ws05.00-p-0161c)
│ ├── 05.00 – 605 589 00 33 00 Puller (ws05.00-p-0154b)
│ ├── 05.00 – 606 589 00 37 00 Pliers (ws05.00-p-0116b)
│ ├── 05.00 – 606 589 02 15 00 Drift punch (ws05.00-p-0167c)
│ ├── 05.00 – 642 589 00 33 00 Riveting tool (ws05.00-p-0260c)
│ ├── 05.00 – Technical modifications Passenger cars Engine timing (bt05.00-z-9999az)
│ ├── 05.00 – Test and adjustment values Passenger cars Engine timing (be05.00-z-9999az)
│ ├── 05.00 – Tightening torques Passenger cars Engine timing – – ba05.00-z-9999az)
│ ├── 05.10 – 3100 – Removal and installation of the chain tensioner Engine 119 (ra05001193100x)
│ ├── 05.10 – 3200 – Replacement of and riveting the timing chain Engine 119 (ra05001193200x)
│ ├── 05.10 – 3300 – Removal and installation of the tensioning rail Engine 119 (ra05001193300x)
│ ├── 05.10 – 3330 – Removing and Installing slide rails (arrangement) A. Engine 119.96, B. Engine 119.97 (ra05001193330x)
│ ├── 05.10 – 3350 – Removal and installation of guide rails at top of cylinder head Engine 119 (ra05001193350x)
│ ├── 05.10 – 3400 – Removal and installation of guide rail in crankcase Engine 119.97 (ra05001193400x)
│ ├── 05.20 – 2150 – Checking the camshaft timing Engine 119 (ra05001192150x)
│ ├── 05.20 – 2170 – Removal and installation of the camshaft adjuster Engine 119 (ra05001192170x)
│ ├── 05.20 – 2175 – Armature and solenoid at camshaft adjuster Engine 119 (ra05001192175x)
│ ├── 05.20 – 2190 – Matching the parts of the camshaft adjusters Engine 119 (ra05001192190x)
│ ├── 05.20 – 2200 – Removal and installation of the camshafts Engine 119 (ra05001192200x)
│ ├── 05.20 – 2230 – Checking and adjustment of the camshaft basic setting Engine 119 (ra05001192230x)
│ ├── 05.30 – 2500 – Removal and installation of the valve springs A. Models 124, 129, 140 B. Model 210A. Models 124, 129, 140 B. Model 210 Engine 119 (ra05001192500x)
│ ├── 05.30 – 2550 – Removing and installing valves Engine 119 (ra05001192550x)
│ ├── 05.30 – 2600 – Inspecting valve springs Engine 119 (ra05001192600x)
│ ├── 05.30 – 2700 – Replacement of the valve stem seals Engine 119 (ra05001192700x)
│ ├── 05.30 – 2800 – Inspecting and machining valves Engine 119 (ra05001192800x)
│ ├── 05.30 – 2845 – Checking the valve guides Engine 119 (ra05001192845x)
│ ├── 05.30 – 2850 – Replacement of the valve guides Engine 119 (ra05001192850x)
│ ├── 05.30 – 2900 – Replacing valve seat rings Engine 119 (ra05001192900x)
│ ├── 05.30 – 2910 – Machining valve seat rings Engine 119 (ra05001192910x)
│ └── 05.30 – Technical modifications Engine timing, valves Engine 119 (ra0500119ta00x)
├── 07_Mixture Formation
│ ├── 07.00 – 000 589 00 68 00 Cleaning kit (ws07.00-p-0001c)
│ ├── 07.00 – 000 589 68 03 00 Box wrench bit (ws07.00-n-0004a)
│ ├── 07.00 – 000 589 68 03 00 Box wrench bit (ws07.00-p-0004b)
│ ├── 07.00 – 000 589 69 03 00 Ring wrench bit (ws07.00-p-0088b)
│ ├── 07.00 – 103 589 00 21 00 Testing unit (ws07.00-n-0014b)
│ ├── 07.00 – 103 589 02 63 00 Adapter (ws07.00-p-0017b)
│ ├── 07.00 – 104 589 00 63 00 Test cable (ws07.00-p-0018b)
│ ├── 07.00 – 117 589 04 07 00 Slotted nut wrench (ws07.00-p-0023c)
│ ├── 07.00 – 119 589 04 63 00 Pressure hose (ws07.00-p-0024b)
│ ├── 07.00 – 123 589 00 15 00 Drift punch (ws07.00-p-0026b)
│ ├── 07.00 – 123 589 05 33 00 Puller (ws07.00-p-0027b)
│ ├── 07.00 – 124 589 01 37 00 Lead-sealing pliers (ws07.00-p-0028b)
│ ├── 07.00 – 124 589 19 21 00 Pulse counter (ws07.00-p-0029b)
│ ├── 07.00 – 124 589 24 63 00 Stamping set (ws07.00-p-0030b)
│ ├── 07.00 – 124 589 43 63 00 22-pin test cable (ws07.00-p-0033b)
│ ├── 07.00 – 126 589 11 63 00 Emission probe (ws07.00-p-0036b)
│ ├── 07.00 – 140 589 01 33 00 Mounting lever (ws07.00-p-0037a)
│ ├── 07.00 – 140 589 09 21 00 Simulator (ws07.00-p-0040b)
│ ├── 07.00 – 140 589 10 21 00 Simulator (ws07.00-p-0041b)
│ ├── 07.00 – A – Test and adjustment Data 00 – Test values with ignition ON and starting speed All Engines (dh0a00pm00000x)
│ ├── 07.00 – B3 – Test and Adjustment Operations 51 – Testing engine output and exhaust emissions All Engines (dh0b03pm00051x)
│ ├── 07.00 – C – Diagnosis test equipment 60 – Diagnosis test All engines (dh0c00pm00060x)
│ ├── 07.00 – C – Diagnostic Testers 11 – General All Engines (dh0c00pm10011x)
│ ├── 07.00 – C – Diagnostic Testers 12 – Fault Analysis All Engines (dh0c00pm10012z)
│ ├── 07.00 – C – Diagnostic Testers 13 – Test procedure engine not running All Engines (dh0c00pm10013z)
│ ├── 07.00 – C – Diagnostic Testers 14 – Test procedure engine running All Engines (dh0c00pm10014z)
│ ├── 07.00 – C – Diagnostic Testers 21 – Fault code with diagnostic testers All Engines (dh0c00pm10021x)
│ ├── 07.00 – C – Diagnostic Testers 31 – Connection diagram All Engines (dh0c00pm10031x)
│ ├── 07.00 – C – Diagnostic Testers 33 – Connection diagram two-circuit ignition system Engines 119 KE_LH (dh0c00pm10033x)
│ ├── 07.00 – C – Diagnostic testers 41 – Diagnostic test – Overview All Engines (dh0c00pm10041x)
│ ├── 07.00 – C – Diagnostic Testers 42 – Diagnostic Test – Start Test All Engines (dh0c00pm10042x)
│ ├── 07.00 – C – Diagnostic Testers 45 – Diagnostic Test – Engine setting All Engines (dh0c00pm10045x)
│ ├── 07.00 – C – Diagnostic Testers 48 – Diagnostic test All Engines (dh0c00pm00048x)
│ ├── 07.00 – C – Diagnostic Testers 49 – Diagnostic test – Engine output test All Engines (dh0c00pm10049x)
│ ├── 07.00 – C – Diagnostic Testers 50 – Diagnostic test – Special signals All Engines (dh0c00pm10050x)
│ ├── 07.00 – C – Diagnostic testing devices 35 – Connection diagram, zero signal high voltage distribution All Engines (dh0c00pm00035x)
│ ├── 07.00 – Certificates Passenger cars Mixture formation (of07.00-z-1999az)
│ ├── 07.00 – D – Diagnosis Paths 11_1 – Complaint – Starting behavior_Starting time All Engines (dh0d00pm11101x)
│ ├── 07.00 – D – Diagnosis Paths 11_2 – Complaint – Idling not smooth, surging_misfiring All Engines (dh0d00pm11102x)
│ ├── 07.00 – D – Diagnosis Paths 11_3 – Complaint – Poor throttle response_Transition fault All Engines (dh0d00pm11103x)
│ ├── 07.00 – D – Diagnosis Paths 11_4 – Complaint – Poor output_Fuel consumption All Engines (dh0d00pm11104x)
│ ├── 07.00 – Exhaust emission test I (ar07.00-p-1000a)
│ ├── 07.00 – Forms Passenger cars Mixture formation (of07.00-z-3999az)
│ ├── 07.00 – Service Information on fuel consumption measurement (si07.00-p-0004a)
│ ├── 07.00 – Technical modifications Passenger cars Mixture formation (bt07.00-z-9999az)
│ ├── 07.00 – Test and adjustment values Passenger cars Mixture formation (be07.00-z-9999az)
│ ├── 07.00 – Tightening torques Passenger cars Mixture formation – – ba07.00-z-9999az)
│ ├── 07.03 – Removing and installing fuel rail with injection valves (LH-SFI) (ar07.03-p-1452e)
│ ├── 07.03 – Removing and installing injection valves (LH-SFI) (ar07.03-p-6521e)
│ ├── 07.03 – Removing and installing insulation sleeves or rubber rings (for injection valves) (LH-SFI) (ar07.03-p-6570e)
│ ├── 07.17 – Removing and installing diaphragm pressure regulator (LH-SFI) (ar07.17-p-1451e)
│ ├── 07.32 – 0750 – Checking and adjustment of the idle speed, emission value_lambda control Engines 104, 119, 120 LH-injection (except USA) Models 124, 129, 140 to 6_93 (wh0750pkw0040z)
│ ├── 07.32 – B1 – Test and Adjustment Operations 11 – Testing, adjusting engine Engine 104, 119 KE (dh0b01pm10011x)
│ ├── 07.32 – B2 – Test and Adjustment Operations 31 – Testing, adjusting idle speed Engine 104, 119 KE (dh0b02pm10031x)
│ ├── 07.41 – 0004 – Function desciption Vehicle features LH – Injection System (ra0704flh0004x)
│ ├── 07.41 – 0010 – Function desciption Function diagram A. Engine 104, B. Engine 119, C. Engine 120 LH – Injection System (ra0704flh0010x)
│ ├── 07.41 – 0015 – Function desciption Location of components A. Engine 104, B. Engine 119, C. Engine 120 LH – Injection System (ra0704flh0015x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 11 – Diagnosis – Fault memory Engines 104, 119 (dh0301pm20011x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 12 – Diagnosis – Troubleshooting table Engines 104, 119 (dh0301pm20012x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 21 – Test program – Electrics, Location of components Engines 104, 119 (dh0301pm20021x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 22 – Test program – Electrics, Preconditions for test Engines 104, 119 (dh0301pm20022x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 23 – Test program – Electrics, Test Engines 104, 119 (dh0301pm20023x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 31 – Test program – Hydraulics, Testing fuel pressures and for internal leaks Engines 104, 119 (dh0301pm20031x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 32 – Test program – Hydraulics, Testing fuel pressures and for internal leaks Engines 104, 119 (dh0301pm20032x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 33 – Test program – Hydraulics, Testing fuel pumps Engines 104, 119 (dh0301pm20033x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 34 – Test program – Hydraulics, Testing the fuel pumps Engines 104, 119 (dh0301pm20034x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 35 – Test program – Hydraulics, Testing the fuel injection valves Engines 104, 119 (dh0301pm20035x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 36 – Test program – Hydraulics, Testing the fuel injection valves Engines 104, 119 (dh0301pm20036x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 41 – Test program – Hydraulics, Performing cold start Engines 104, 119 (dh0301pm20041x)
│ ├── 07.41 – 3.1 – Gasoline Injection System (LH) 42 – Test program – Hydraulics, Performing a cold start Engines 104, 119 (dh0301pm20042x)
│ ├── 07.41 – 5.2 – Electronic Ignition System (EZL) 11 – Diagnosis – Fault memory Engines 104, 119 LH (dh0502pm20011x)
│ ├── 07.41 – 5.2 – Electronic Ignition System (EZL) 12 – Diagnosis – Troubleshooting table Engines 104, 119 LH (dh0502pm20012x)
│ ├── 07.41 – 5.2 – Electronic Ignition System (EZL) 21 – Test program – Electrics, Location of components Engines 104, 119 LH (dh0502pm20021x)
│ ├── 07.41 – 5.2 – Electronic Ignition System (EZL) 22 – Test program – Electrics, Preconditions for test Engines 104, 119 LH (dh0502pm20022x)
│ ├── 07.41 – 5.2 – Electronic Ignition System (EZL) 23 – Test program – Electrics, Test (engine not running) Engines 104, 119 LH (dh0502pm20023x)
│ ├── 07.41 – 5.2 – Electronic Ignition System (EZL) 24 – Test program – Electrics, Test (engine running) Engines 104, 119 LH (dh0502pm20024x)
│ ├── 07.41 – 5.2 – Electronic Ignition System (EZL) 25 – Test program – Electrics, Figures Engines 104, 119 LH (dh0502pm20025x)
│ ├── 07.41 – A – Test and adjustment Data 32 – Engines 119.970_971 from 01_91, 119.972 from 09_92, 119.974 from 01_92 and 119.975 from 10_92 (dh0a00pm00032x)
│ ├── 07.41 – B1 – Test and Adjustment Operations 21 – Testing, adjusting engine Engine 104, 119, 120 LH (dh0b01pm10021x)
│ ├── 07.41 – B2 – Test and Adjustment Operations 41 – Testing, adjusting idle speed Engine 104, 119, 120 LH (dh0b02pm10041x)
│ ├── 07.41 – Checking and readjusting idle, emission value_lambda control (LH-SFI) (ap07.41-p-0750a)
│ ├── 07.41 – Removing and installing hot wire mass air flow sensor (ar07.41-p-1453e)
│ ├── 07.41 – Removing and installing LH-SFI variable reference resistor (ar07.41-p-1459e)
│ └── 07.61 – Test_adjust idle speed, emission value_lambda control (ME-SFI) (ap07.61-p-0750a)
├── 08_Electric Drive, Hybrid Drive
│ ├── 08.00 – Capacities Passenger cars Electrical drive system (bf08.00-z-9999az)
│ ├── 08.00 – Forms Passenger cars Electrical drive system (of08.00-z-3999az)
│ ├── 08.00 – Test and adjustment values Passenger cars Electrical drive system (be08.00-z-9999az)
│ └── 08.00 – Tightening torques Passenger cars Electrical drive system (ba08.00-z-9999az)
├── 09_Air Intake, Turbocharging
│ ├── 09.00 – Forms Passenger cars Air intake, supercharging (of09.00-z-3999az)
│ ├── 09.00 – Technical modifications Passenger cars Air intake, supercharging (bt09.00-z-9999az)
│ ├── 09.00 – Test and adjustment values Passenger cars Air intake, supercharging (be09.00-z-9999az)
│ ├── 09.00 – Tightening torques Passenger cars Air intake, supercharging – – ba09.00-z-9999az)
│ ├── 09.10 – 0980 – Replacement of the air cleaner element All engines except 116, 117 with air pump Models 107 from 8_85, 123, 124, 126 from 9_85, 129, 140 to 6_93, 201 from 1_85 (wh0980pkw0000x)
│ ├── 09.10 – Luftfilter aus-, einbauen (ar09.10-p-1050e)
│ ├── 09.10 – Removing and installing intake scoop (ar09.10-p-8221eb)
│ ├── 09.20 – 0010 – Intake manifold A. Engine 104, B. Engine 119, C. Engine 120, D. National versions (J) and (USA) Function desciption LH – Injection System (ra1400flh0010x)
│ ├── 09.20 – Removing and installing intake manifold (ar09.20-p-1310ea)
│ └── 09.20 – Removing and installing intake manifold (ar09.20-p-1310e)
├── 13_Air Compressor, Belt Drives
│ ├── 13.00 – Technical modifications Passenger cars Air compressor, belt drives (bt13.00-z-9999az)
│ ├── 13.00 – Test and adjustment values Passenger cars Air compressor, belt drives (be13.00-z-9999az)
│ ├── 13.00 – Tightening torques Passenger cars Air compressor, belt drives – – ba13.00-z-9999az)
│ ├── 13.20 – 1351 – Poly V-belts – Check condition All engines (single-belt drive) Models 107 from 8_85, 124, 126 from 9_85, 129, 140 to 6_93, 201 from 1_85 (wh1351pkw0000x)
│ ├── 13.20 – 3420 – Removal and installation of the poly V-belt 1st version, 2_3 version Engine 119 (ra13001193420x)
│ ├── 13.20 – 3430 – Examination poly V-belt, damage patterns Engine 119 (ra13001193430x)
│ ├── 13.20 – 3440 – Poly V-belts, running diagrams, dimensions Engine 119 (ra13001193440x)
│ ├── 13.22 – Check visible area of poly-V belt for wear (ap13.22-p-1352z)
│ ├── 13.25 – 3450 – Removal and installation of the tensioning device 1st version, 2nd and 3rd version Engine 119 (ra13001193450x)
│ └── 13.25 – 3452 – Inspecting tensioning device (1st version) Engine 119 (ra13001193452x)
├── 14_Exhaust Manifold, Engine Brake, Emission Control System
│ ├── 14.00 – 000 588 01 71 00 Extraction pump (ws14.00-p-0013b)
│ ├── 14.00 – 000 588 08 21 00 Test and measuring kit (ws14.00-p-0012b)
│ ├── 14.00 – 103 589 01 39 00 Caulking bolt (ws14.00-n-0001b)
│ ├── 14.00 – Capacities Passenger cars Exhaust manifold, engine brake, emission control system – – bf14.00-z-9999az)
│ ├── 14.00 – Certificates Passenger cars Exhaust manifold, engine brake, emission control system (of14.00-z-1999az)
│ ├── 14.00 – Remove_install the oxygen sensor (ar14.00-p-5303e)
│ ├── 14.00 – Technical modifications Passenger cars Exhaust manifold, engine brake, emission control system (bt14.00-z-9999az)
│ ├── 14.00 – Test and adjustment values Passenger cars Exhaust manifold, engine brake, emission control system (be14.00-z-9999az)
│ ├── 14.00 – Tightening torques Passenger cars Exhaust manifold, engine brake, emission control system – – ba14.00-z-9999az)
│ ├── 14.10 – 0020 – Exhaust manifold A. Engine 104, B. Engine 119, C. Engine 120 Function desciption LH – Injection System (ra1400flh0020x)
│ ├── 14.10 – Remove_install exhaust manifold on right (ar14.10-p-4005e)
│ ├── 14.10 – Remove_install left exhaust manifold (ar14.10-p-3930e)
│ ├── 14.20 – Removing and installing exhaust gas recirculation valve (ar14.20-p-7662e)
│ ├── 14.30 – Remove_install air pump (ar14.30-p-7251ea)
│ ├── 14.30 – Remove_install air pump (ar14.30-p-7251e)
│ ├── 14.30 – Remove_install air pump belt pulley (ar14.30-p-7252f)
│ ├── 14.30 – Removing and installing electromagnetic coupling (ar14.30-p-7264d)
│ ├── 14.40 – Service Information Fill AdBlue container (si14.40-p-0014a)
│ └── 14.40 – Service Information Return delivery of AdBlue tank (si14.40-p-0023a)
├── 15_Electrical System – Engine
│ ├── 15.00 – 000 588 03 19 00 Load tester (ws15.00-p-0027b)
│ ├── 15.00 – 000 589 55 37 00 Cable pliers (ws15.00-p-0001b)
│ ├── 15.00 – 0010 – Function description Notes regarding working on breakerless ignition system LH Injection System (ra1500flh0010x)
│ ├── 15.00 – 0020 – Function desciption Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) LH Injection System (ra1500flh0020x)
│ ├── 15.00 – 119 589 02 09 00 Spark plug wrench (ws15.00-p-0007a)
│ ├── 15.00 – 120 589 02 09 00 Spark plug wrench (ws15.00-p-0008a)
│ ├── 15.00 – 124 589 09 63 00 Ohm decade (ws15.00-n-0009c)
│ ├── 15.00 – 124 589 09 63 00 Ohm decade (ws15.00-p-0009c)
│ ├── 15.00 – 129 589 05 63 00 22-pin test cable (ws15.00-p-0012b)
│ ├── 15.00 – 140 589 10 63 00 Test cable (ws15.00-p-0013b)
│ ├── 15.00 – 201 589 00 99 00 Electrical connection kit (ws15.00-n-0014c)
│ ├── 15.00 – 602 589 00 10 00 Socket wrench (ws15.00-p-0015b)
│ ├── 15.00 – Check spark plugs and replace if necessary (ap15.00-p-1550z)
│ ├── 15.00 – Forms Passenger cars Electrical system – engine (of15.00-z-3999az)
│ ├── 15.00 – Technical modifications Passenger cars Electrical system – engine (bt15.00-z-9999az)
│ ├── 15.00 – Test and adjustment values Passenger cars Electrical system – engine (be15.00-z-9999az)
│ ├── 15.00 – Tightening torques Passenger cars Electrical system – engine – – ba15.00-z-9999az)
│ ├── 15.10 – 1580 – Replacement of the spark plugs Gasoline engines Models 107 from 8_85, 123, 124, 126 from 9_85, 129, 140 to 6_93, 201 from 1_85 (wh1580pkw0000x)
│ ├── 15.10 – C – Diagnostic Testers 46 – Diagnostic test – Smoth engine running, general All Engines (dh0c00pm10046x)
│ ├── 15.10 – C – Diagnostic Testers 47 – Diagnostic test – Single cylinder analysis All Engines (dh0c00pm10047x)
│ ├── 15.10 – Replace spark plugs (ap15.10-p-1580ea)
│ ├── 15.10 – Service Information Spark plug connector grease (si15.10-p-0004a)
│ ├── 15.12 – C – Diagnostic Testers 43 – Diagnostic Test – Ignition Coil Test (only Bear tester) All Engines (dh0c00pm10043x)
│ ├── 15.12 – Remove_install knock sensors (ar15.12-p-2184e)
│ ├── 15.12 – Removing and installing, adjusting camshaft position sensor (ar15.12-p-2143e)
│ ├── 15.12 – Removing and installing crankshaft position sensor (ar15.12-p-2133e)
│ ├── 15.12 – Removing and installing high voltage distributor cap, high voltage distributor rotor (ar15.12-p-1928e)
│ ├── 15.12 – Removing and installing ignition coils (ar15.12-p-2003e)
│ ├── 15.12 – Replacing ignition cables with M3 cable screw (ar15.12-p-0512g)
│ ├── 15.18 – Servicing wiring harness (ar15.18-p-0500a)
│ ├── 15.30 – Removing and installing starter (ar15.30-p-7100ec)
│ ├── 15.30 – Service Information Return delivery of starter diagnostic data (si15.30-p-0002a)
│ ├── 15.40 – C – Diagnostic Testers 44 – Diagnostic test – Alternater test All Engines (dh0c00pm10044x)
│ ├── 15.40 – Check charging current of alternator (ar15.40-p-5011c)
│ ├── 15.40 – Checking regulation voltage of alternator (ar15.40-p-5010c)
│ ├── 15.40 – Prerequisites for testing alternator (ar15.40-p-5009c)
│ ├── 15.40 – Remove_install alternator (ar15.40-p-5032cs)
│ ├── 15.40 – Remove_install alternator belt pulley (ar15.40-p-5710cs)
│ ├── 15.40 – Removing and installing regulator of generator (ar15.40-p-5760cs)
│ └── 15.40 – Retrofit smaller poly-V belt pulley and aluminum fan wheel (an15.40-p-5700cs)
├── 18_Engine Lubrication, Engine Oil Cooling
│ ├── 18.00 – 000 588 05 82 00 Oil extraction sensor (ws18.00-p-0027b)
│ ├── 18.00 – 000 588 06 82 00 Oil dispenser (ws18.00-p-0026b)
│ ├── 18.00 – 103 589 02 09 00 Wrench socket (ws18.00-p-0004a)
│ ├── 18.00 – 115 589 15 21 00 Dipstick (ws18.00-p-0008b)
│ ├── 18.00 – 117 589 02 07 00 Pin box wrench (ws18.00-p-0009a)
│ ├── 18.00 – 120 589 06 21 00 Dipstick (ws18.00-p-0010b)
│ ├── 18.00 – 124 589 07 21 00 Remote thermometer (ws18.00-p-0011b)
│ ├── 18.00 – Capacities Passenger cars Engine lubrication, engine oil cooling – – bf18.00-z-9999az)
│ ├── 18.00 – Engine oil and filter change (ap18.00-p-0101aa)
│ ├── 18.00 – Engine oil and filter change (ap18.00-p-0101ag)
│ ├── 18.00 – Forms Passenger cars Engine lubrication, engine oil cooling (of18.00-z-3999az)
│ ├── 18.00 – Service Information Engine oil change (si18.00-p-0011b)
│ ├── 18.00 – Technical modifications Engine lubrication, engine oil cooling Engine 119 (ra1800119ta00x)
│ ├── 18.00 – Technical modifications Passenger cars Engine lubrication, engine oil cooling (bt18.00-z-9999az)
│ ├── 18.00 – Test and adjustment values Passenger cars Engine lubrication, engine oil cooling (be18.00-z-9999az)
│ ├── 18.00 – Test Sheet for Oil Consumption Test Passenger vehicles Models 124 (engine 119.974_975), 129 (engine 119.960_972) (wb6516lit7470z)
│ ├── 18.00 – Test sheet for oil consumption test (Weight method) Passenger cars and cross country vehicles (wb6516lit7401z)
│ ├── 18.00 – Tightening torques Passenger cars Engine lubrication, engine oil cooling – – ba18.00-z-9999az)
│ ├── 18.10 – 2100 – Removal and installation of the oil pump Engine 119 Models 124, 129 (ra18001192100x)
│ ├── 18.10 – 2150 – Removal and installation of the oil pressure relief valve (oil pump) Engine 119 Models 124, 129 (ra18001192150x)
│ ├── 18.20 – 1100 – B. Removing and installing oil filter housing Model 129 Engines 119.96, 119.97, and 119.98 (ra180b1191100x)
│ ├── 18.20 – 1110 – Function of the oil filter Engine 119 (ra18001191110x)
│ ├── 18.20 – 1120 – Removing and installing oil return check valve in oil filter Engine 119 (ra18001191120x)
│ ├── 18.30 – 1300 – Removal and installation of the air-to-oil cooler A. Model 124.036, B. Model 129 Engine 119 (ra18001191300x)
│ ├── 18.40 – 0070 – Testing the oil pressure and sensor Engine 119 in Model 129 (ra18001190070x)
│ ├── 18.40 – 0090 – Function of the oil pressure indicator Engine 119 in Model 129 (ra18001190090x)
│ ├── 18.40 – 3100 – Function of the electrical oil level indicator Engine 119 Models 129, 210 (ra18001193100x)
│ └── 18.40 – 3300 – Removal and installation of the oil level sensor Engine 119 (ra18001193300x)
├── 20_Engine Cooling System
│ ├── 20.00 – 000 589 77 63 00 Adapter (ws20.00-p-0002b)
│ ├── 20.00 – 0020 – Switching points in cooling system Engine 119 in Models 124, 129, 140, and 210 (ra20001190020x)
│ ├── 20.00 – 0100 – Draining and filling coolant, anti-freeze protection table Engine 119 in Models 124, 129, 140, and 210 (ra20001190100x)
│ ├── 20.00 – 0160 – Removing oil in cooling and heating system Engine 119 in Models 124, 129, 140, and 210 (ra20001190160x)
│ ├── 20.00 – 0170 – Leak test of the cooling system Engine 119 in Models 124, 129, 140, and 210 (ra20001190170x)
│ ├── 20.00 – 103 589 01 09 00 Screwdriver bit (ws20.00-n-0005b)
│ ├── 20.00 – 117 589 00 90 00 Flushing pipe (ws20.00-p-0009c)
│ ├── 20.00 – 119 589 00 03 00 Box wrench bit (ws20.00-p-0010c)
│ ├── 20.00 – 119 589 00 09 00 Socket (ws20.00-p-0011c)
│ ├── 20.00 – 120 589 02 01 00 Open-end wrench (ws20.00-p-0012b)
│ ├── 20.00 – 120 589 14 07 00 Screwdriver (ws20.00-p-0013b)
│ ├── 20.00 – 124 589 00 91 00 Test cap (ws20.00-p-0018b)
│ ├── 20.00 – 124 589 24 21 00 Pressure pump (ws20.00-p-0016b)
│ ├── 20.00 – 210 589 00 91 00 Test cap (ws20.00-p-0017b)
│ ├── 20.00 – 285 589 00 21 00 Cooler vacuum filling device (ws20.00-p-0030b)
│ ├── 20.00 – 4300 – Testing the cooling system cap Models 124, 129, 140, and 210 Engine 119 (ra20001194300x)
│ ├── 20.00 – 4400 – Function of the electrical coolant level indicator A. Model 124, B. Models 129_140 Engine 119 (ra20001194400x)
│ ├── 20.00 – Capacities Passenger cars Engine cooling system – – bf20.00-z-9999az)
│ ├── 20.00 – Engine cooling system – check fluid level, adjust to correct level. Inspect anticorrosion_antifreeze protection, adjust to correct concentration (ap20.00-p-2010z)
│ ├── 20.00 – Replace coolant (ap20.00-p-2080a)
│ ├── 20.00 – Technical modifications Engine cooling, coolant, radiator Engine 119 (ra2000119ta00x)
│ ├── 20.00 – Technical modifications Passenger cars Engine cooling system (bt20.00-z-9999az)
│ ├── 20.00 – Test and adjustment values Passenger cars Engine cooling system – – be20.00-z-9999az)
│ ├── 20.00 – Tightening torques Passenger cars Engine cooling system – – ba20.00-z-9999az)
│ ├── 20.10 – 1100 – Removal and installation of the coolant thermostat Engine 119 in Models 124, 129, 140, and 210 (ra20001191100x)
│ ├── 20.10 – 2100 – Removal and installation of the coolant pump Engine 119 in Models 124, 129, 140, and 210 (ra20001192100x)
│ ├── 20.20 – 0150 – Notes on coolant hoses Engine 119 in Models 124, 129, 140, and 210 (ra20001190150x)
│ ├── 20.20 – 4200 – Removal and installation of the radiator A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001194200x)
│ ├── 20.30 – 4500 – Removal and installation of the expansion reservoir A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001194500x)
│ ├── 20.30 – 4540 – Removal and installation of the overflow reservoir A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001194540x)
│ ├── 20.40 – 3120 – Removal and installation of the viscous fan clutch A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001193120x)
│ └── 20.40 – 3140 – Removal and installation of the viscous fan clutch bearing bracket A. Model 124, B. Model 129 Engine 119 (ra20001193140x)
├── 22_Engine Suspension
│ ├── 22.00 – Tightening torques Passenger cars Engine suspension – – ba22.00-z-9999az)
│ ├── 22.10 – 2110 – B. Removing and installing front engine mounts Model 129 Engine 119 (ra220b1192110x)
│ └── 22.10 – 2120 – Removal and installation of the rear engine mount A. Model 124, 140, B. Model 129, C. Model 210 Engine 119 (ra22001192120x)
├── 25_Clutch
│ ├── 25.00 – 000 588 01 82 00 Filling unit (ws25.00-p-0016b)
│ ├── 25.00 – 000 589 47 31 00 Alignment tool (ws25.00-p-0003b)
│ ├── 25.00 – 115 589 07 23 00 Inspection gauge (ws25.00-n-0001a)
│ ├── 25.00 – 201 589 08 15 00 Alignment punch (ws25.00-n-0002b)
│ ├── 25.00 – Technical modifications Passenger cars Clutch (bt25.00-z-9999az)
│ ├── 25.00 – Test and adjustment values Passenger cars Clutch (be25.00-z-9999az)
│ ├── 25.00 – Tightening torques Passenger cars Clutch (ba25.00-z-9999az)
│ ├── 25.10 – 2551 – Checking the clutch plate wear Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh2551pkw0000x)
│ ├── 25.10 – Checking clutch disk for wear when installed (ar25.10-p-0020a)
│ ├── 25.10 – Remove_install clutch (ar25.10-p-0050a)
│ ├── 25.20 – Bleeding the clutch actuation (ar25.20-p-0070a)
│ ├── 25.20 – Removing and installing master cylinder (ar25.20-p-0100a)
│ └── 25.20 – Removing and installing slave cylinder (ar25.20-p-0150a)
├── 26_Manual Transmission
│ ├── 26.00 – 000 588 04 19 00 Inclinometer (ws26.00-p-0140b)
│ ├── 26.00 – 000 588 10 62 00 Support plate (ws26.00-p-3309b)
│ ├── 26.00 – 711 589 03 15 00 Drift (ws26.00-n-3263b)
│ ├── 26.00 – 711 589 07 15 00 Drift (ws26.00-n-3400c)
│ ├── 26.00 – Capacities Passenger cars Manual transmission (bf26.00-z-9999az)
│ ├── 26.00 – Forms Passenger cars Manual transmission (of26.00-z-3999az)
│ ├── 26.00 – Technical modifications Passenger cars Manual transmission (bt26.00-z-9999az)
│ ├── 26.00 – Test and adjustment values Passenger cars Manual transmission (be26.00-z-9999az)
│ └── 26.00 – Tightening torques Passenger cars Manual transmission – – ba26.00-z-9999az)
├── 27_Automatic Transmission
│ ├── 27.00 – 0001 – Installation survey, test and pressure data, basic and national versions Automatic transmission 722.3 from 09_88 (ra27037220001x)
│ ├── 27.00 – 0002 – Transmission ratios Automatic transmission 722.3 from 09_88 (ra27037220002x)
│ ├── 27.00 – 000 588 08 82 00 Transmission flushing unit (ws27.00-p-0137b)
│ ├── 27.00 – 000 589 52 37 00 Pliers (ws27.00-p-0001c)
│ ├── 27.00 – 001 589 50 33 00 Puller (ws27.00-p-3116c)
│ ├── 27.00 – 0320 – Testing during the road test Automatic transmission 722.3 from 09_88 (ra27037220320x)
│ ├── 27.00 – 112 589 00 72 00 Hand pump (ws27.00-n-0003a)
│ ├── 27.00 – 115 589 01 07 00 Pin wrench socket (ws27.00-p-0005b)
│ ├── 27.00 – 115 589 08 07 00 Pin wrench socket (ws27.00-p-0006b)
│ ├── 27.00 – 116 589 00 15 00 Drive shaft (ws27.00-p-0010c)
│ ├── 27.00 – 116 589 06 59 00 Assembly stand (ws27.00-p-0014c)
│ ├── 27.00 – 123 589 04 21 00 Tester (ws27.00-p-0018b)
│ ├── 27.00 – 124 589 19 21 00 Pulse counter (ws27.00-p-0019b)
│ ├── 27.00 – 126 589 00 35 00 Assembly device (ws27.00-n-0020c)
│ ├── 27.00 – 126 589 02 09 00 Socket wrench bit (ws27.00-p-0022b)
│ ├── 27.00 – 126 589 03 14 00 Sleeve (ws27.00-p-0023c)
│ ├── 27.00 – 126 589 04 14 00 Sleeve (ws27.00-p-0024c)
│ ├── 27.00 – 126 589 04 31 00 Parallel rest (ws27.00-p-0025c)
│ ├── 27.00 – 126 589 06 21 00 Measuring screw (ws27.00-p-0026c)
│ ├── 27.00 – 126 589 10 14 00 Sleeve (ws27.00-p-0027c)
│ ├── 27.00 – 126 589 10 63 00 Mounting plate (ws27.00-p-0028c)
│ ├── 27.00 – 126 589 12 63 00 Funnel (ws27.00-p-0029a)
│ ├── 27.00 – 129 589 05 63 00 22-pin test cable (ws27.00-p-0032b)
│ ├── 27.00 – 129 589 06 23 00 Gauging disk (ws27.00-p-0033c)
│ ├── 27.00 – 129 589 13 63 00 41-pin test cable (ws27.00-p-0034b)
│ ├── 27.00 – 140 589 00 14 00 Sleeve (ws27.00-p-0035c)
│ ├── 27.00 – 140 589 06 34 00 Collet chuck (ws27.00-p-0053c)
│ ├── 27.00 – 140 589 12 15 00 Drift (ws27.00-p-0048b)
│ ├── 27.00 – 140 589 13 43 00 Assembly device (ws27.00-p-0049c)
│ ├── 27.00 – 140 589 14 63 00 Adapter (ws27.00-p-0037b)
│ ├── 27.00 – 140 589 15 21 00 Dipstick (ws27.00-p-0047b)
│ ├── 27.00 – 140 589 34 63 00 Mounting plate (ws27.00-p-0051c)
│ ├── 27.00 – 140 589 43 63 00 Test cable, 30-pin (ws27.00-p-0050b)
│ ├── 27.00 – 140 589 49 63 00 Filling pipe (ws27.00-p-0055a)
│ ├── 27.00 – 168 589 00 62 00 Handle (ws27.00-p-0062b)
│ ├── 27.00 – 168 589 03 21 00 Parallel support (ws27.00-p-0076c)
│ ├── 27.00 – 168 589 10 15 00 Drift (ws27.00-p-0061b)
│ ├── 27.00 – 201 589 03 59 00 Assembly device (ws27.00-n-0043c)
│ ├── 27.00 – 201 589 12 43 00 Assembly tool (ws27.00-p-0046c)
│ ├── 27.00 – 208 589 00 21 00 Pressing tool (ws27.00-p-0064c)
│ ├── 27.00 – 210 589 00 37 00 Pliers (ws27.00-p-0054b)
│ ├── 27.00 – 606 589 00 37 00 Pliers (ws27.00-p-3117b)
│ ├── 27.00 – 722 589 00 15 00 Drift punch (ws27.00-n-3121b)
│ ├── 27.00 – 722 589 01 90 00 Set of adapters (ws27.00-p-0165b)
│ ├── 27.00 – 722 589 02 15 00 Drift (ws27.00-n-3123c)
│ ├── 27.00 – 722 589 03 09 00 Assembly tool (ws27.00-p-0143b)
│ ├── 27.00 – 722 589 16 15 00 Drift (ws27.00-p-0100b)
│ ├── 27.00 – 9000 – Design of the transmissions Automatic transmission 722.3_4_5 (ra27007229000x)
│ ├── 27.00 – 9020 – Driving tips Automatic transmission 722.3_4_5 (ra27007229020x)
│ ├── 27.00 – 9070 – Power flow in the gears A. 4-speed, B. 5-speed Automatic transmission 722.3_4_5 (ra27007229070x)
│ ├── 27.00 – 9080 – Gear reduction ratios Automatic transmission 722.3_4_5 (ra27007229080x)
│ ├── 27.00 – 9130 – Lubricating pressure Automatic transmission 722.3_4_5 (ra27007229130x)
│ ├── 27.00 – 9320 – Transmission overload protection Automatic transmission 722.3_4_5 (ra27057229320x)
│ ├── 27.00 – Capacities Passenger cars Automatic transmission (bf27.00-z-9999az)
│ ├── 27.00 – Checking oil level in automatic transmission and correcting, if necessary (ar27.00-p-0100a)
│ ├── 27.00 – Check oil level in automatic transmission and correct if necessary. (ar27.00-p-0100ac)
│ ├── 27.00 – Forms Passenger cars Automatic transmission (of27.00-z-3999az)
│ ├── 27.00 – Service Information Heating up automatic transmission fluid for testing and repair work (si27.00-p-0005a)
│ ├── 27.00 – Service information Operation items (si27.00-p-0008a)
│ ├── 27.00 – Service Information Replacing the pilot bushing when repairing automatic transmissions (si27.00-p-0003a)
│ ├── 27.00 – Technical modifications Automatic transmissions Automatic transmission 722.3 as of 09_88 (ra2703722ta00x)
│ ├── 27.00 – Technical modifications Passenger cars Automatic transmission (bt27.00-z-9999az)
│ ├── 27.00 – Test and adjustment values Passenger cars Automatic transmission (be27.00-z-9999az)
│ ├── 27.00 – Tightening torques Passenger cars Automatic transmission – – ba27.00-z-9999az)
│ ├── 27.10 – 0350 – Measurement and adjustment of the pressures Automatic transmission 722.3 from 09_88 (ra27037220350x)
│ ├── 27.10 – 0430 – Removal, installation, disassembly and assembly of lower cover with intermediate plate Automatic transmission 722.3 from 09_88 (ra27037220430x)
│ ├── 27.10 – 0520 – Removal and installation of the centrifugal governor Automatic transmission 722.3 from 09_88 (ra27037220520x)
│ ├── 27.10 – 0530 – Removal, installation, disassembly and assembly of secondary pump (transmission in situ) Automatic transmission 722.3 from 09_88 (ra27037220530x)
│ ├── 27.10 – 0600 – A. Removing and installing transmission with torque converter Vehicles without 4MATIC Automatic transmission 722.3 as of 09_88 (ra2703722a600x)
│ ├── 27.10 – 0630 – Removal and installation of front transmission cover and primary pump Automatic transmission 722.3 from 09_88 (ra27037220630x)
│ ├── 27.10 – 0640 – A. Dismantling and assembling transmission Automatic transmission 722.3 from 09_88 (ra2703722a640x)
│ ├── 27.10 – 0640 – B. Dismantling and assembling transmission Automatic transmission 722.3 from 09_88 (ra2703722b640x)
│ ├── 27.10 – 0640 – C. Dismantling and assembling transmission Automatic transmission 722.3 from 09_88 (ra2703722c640x)
│ ├── 27.10 – 2702 – Automatic transmission Oil and filter change Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh2702pkw0000z)
│ ├── 27.10 – 2710 – Automatic transmission Checking and correcting the oil level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh2710pkw0000x)
│ ├── 27.10 – 9060 – Mechanical design of the transmissions A. 4-speed, B. 5-speed Automatic transmission 722.3_4_5 (ra27007229060x)
│ ├── 27.10 – 9100 – Primary and secondary pumps A. General, B. Primary pump, C. Secondary pump Automatic transmission 722.3_4_5 (ra27007229100x)
│ ├── 27.10 – ATF change in automatic transmission with filter change (ap27.10-p-2702aa)
│ ├── 27.10 – Automatic transmission (AT), contents, function description (gf27.10-p-0999zz)
│ ├── 27.10 – Automatic transmission model and component installation survey as-built configuration (gf27.10-p-0801aa)
│ ├── 27.10 – Remove_install oil pump (ar27.10-p-0400a)
│ ├── 27.10 – Remove_install transmission with torque converter (ar27.10-p-0500b)
│ ├── 27.10 – Survey of system components, automatic transmission (AT), location _ task _ design _ function (gf27.10-p-9990zz)
│ ├── 27.18 – 0425 – Removal and installation of the vacuum box Automatic transmission 722.3 from 09_88 (ra27037220425x)
│ ├── 27.19 – 0130 – Removal, installation and adjustment of the starter lockout switch Automatic transmission 722.3 from 09_88 (ra27037220130x)
│ ├── 27.19 – Disassemble and assemble electrohydraulic controller unit (ar27.19-p-0220a)
│ ├── 27.19 – Electronic transmission control (ETC) diagnosis contents (ad27.19-p-1000az)
│ ├── 27.19 – Remove_install electrohydraulic controller unit (transmission installed) (ar27.19-p-0200a)
│ ├── 27.19 – Replace pilot bushing in electrohydraulic controller unit (ar27.19-p-0230a)
│ ├── 27.19 – Service Information Damage code for transmission software release (si27.19-p-0011a)
│ ├── 27.19 – Service information on electro-hydraulic control unit (si27.19-p-0001a)
│ ├── 27.20 – 9030 – Torque convertor Automatic transmission 722.3_4_5 (ra27007229030x)
│ ├── 27.30 – 0440 – Removal, installation, disassembly and assembly of rear cover (transmission in situ) Automatic transmission 722.3 from 09_88 (ra27037220440x)
│ ├── 27.35 – 0400 – Removal, installation, disassembly and assembly of shift valve body Automatic transmission 722.3 from 09_88 (ra27037220400x)
│ ├── 27.35 – Dismantle and assemble shift plate (ar27.35-p-0350a)
│ ├── 27.40 – Remove_install oil pump radial shaft sealing ring (ar27.40-p-0300a)
│ ├── 27.50 – 0660 – Disassembly, assembly and measuring the gear set Automatic transmission 722.3 from 09_88 (ra27037220660x)
│ ├── 27.50 – 9040 – Design and operating principle of a single planet gear set A. General, B. Design, C. Operating principle (ra27007229040x)
│ ├── 27.50 – 9050 – Design and operating principle of a Ravigneaux planet gear set Automatic transmission 722.3_4_5 (ra27007229050x)
│ ├── 27.50 – Detach_attach transmission housing on torque converter housing. (ar27.50-p-0601a)
│ ├── 27.50 – Disassemble_assemble multi-disk brake B2 (ar27.50-p-0880a)
│ ├── 27.50 – Disassemble_assemble output shaft with center and rear gear set (ar27.50-p-0810a)
│ ├── 27.50 – Disassembling and assembling rear hollow shaft with rear freewheel (ar27.50-p-0850a)
│ ├── 27.50 – Dismantling and assembling multi-disk brake B1 (ar27.50-p-0870a)
│ ├── 27.50 – Remove_install multi-disk brake B1 and oil pump (ar27.50-p-0721a)
│ ├── 27.50 – Remove_install multi-disk brake B2, disk pack B3 and park pawl gear (ar27.50-p-0781a)
│ ├── 27.50 – Removing and installing multiple-disc clutches K1, K2 and K3 (ar27.50-p-0621a)
│ ├── 27.51 – 0680 – Disassembly, assembly and measuring the clutch, K1 Automatic transmission 722.3 from 09_88 (ra27037220680x)
│ ├── 27.51 – 0690 – Disassembly, assembly and measuring of clutch, K2 Automatic transmission 722.3 from 09_88 (ra27037220690x)
│ ├── 27.51 – 9220 – Damper systems, A. General, B. Engaging damper system, C. Damper systems clutch K1, K2 and brake band B1 Automatic transmission 722.3_4_5 (ra27057229220x)
│ ├── 27.51 – Disassemble and assemble clutch K3. (ar27.51-p-0830a)
│ ├── 27.51 – Disassemble_assemble clutch K1 (ar27.51-p-0800b)
│ ├── 27.51 – Dismantling and assembling drive shaft with clutch K2 and front gear set (ar27.51-p-0825a)
│ ├── 27.55 – Flushing out oil cooler lines and oil cooler (ar27.55-p-0001a)
│ ├── 27.55 – Flush out automatic transmission and torque converter (ar27.55-p-0100a)
│ ├── 27.55 – Flush out automatic transmission and torque converter (ar27.55-p-0100b)
│ ├── 27.60 – 0110 – Adjustment of the cable for the control pressure Automatic transmission 722.3 from 09_88 (ra27037220110x)
│ ├── 27.60 – 0120 – A. Adjusting shift rod Models 124 without 4MATIC, 126, 129, 140 Automatic transmission 722.3 as of 09_88 (ra2703722a120x)
│ ├── 27.60 – 0140 – Testing and adjustment of the vacuum control valve Automatic transmission 722.3 from 09_88 Engine 603.96 (ra27037220140x)
│ ├── 27.60 – 0330 – Shift points in selector lever position D Automatic transmission 722.3 from 09_88 (ra27037220330z)
│ ├── 27.60 – 0740 – B. Adjusting and checking parking lock Model 129 as of 09_89 Automatic transmission 722.3 from 09_88 (ra2703722b740x)
│ ├── 27.60 – 0740 – C. Adjusting and checking parking lock Models 124,126,129 as of 09_89 Automatic transmission 722.3 from 09_88 (ra2703722c740x)
│ ├── 27.60 – 0745 – B. Removing, installing, dismantling and assembling floor shift Model 129 Automatic transmission 722.3 from 09_88 (ra2703722b745x)
│ ├── 27.60 – 9010 – Function ranges A. Selector-lever positions, B. Shift operations Automatic transmission 722.3_4_5 (ra27007229010x)
│ ├── 27.60 – 9110 – Operating pressure A. General, B. Control in basic pressure range (deceleration), C. Control under engine load, Automatic transmission 722.3_4_5 (ra27007229110x)
│ ├── 27.60 – 9120 – Modulating pressure Automatic transmission 722.3_4_5 (ra27007229120x)
│ ├── 27.60 – 9140 – Control pressure A. Pressures S1 and S2, B. Kickdown pressure S3 Automatic transmission 722.3_4_5 (ra27007229140x)
│ ├── 27.60 – 9150 – Governor pressure Automatic transmission 722.3_4_5 (ra27007229150x)
│ ├── 27.60 – 9160 – Boosted governor pressure Automatic transmission 722.3_4_5 (ra27007229160x)
│ ├── 27.60 – 9170 – Shift pressure Getriebe 722.3_4_5 (ra27007229170x)
│ ├── 27.60 – 9180 – Function of the command valves and sequence of gearshifts Automatic transmission 722.3_4_5 (ra27007229180x)
│ ├── 27.60 – 9200 – Downshifts when accelerating (function of the reaction valves) A. General, B. 3-2 downshift, C. 4-3 downshift Automatic transmission 722.3_4_5 (ra27057229200x)
│ ├── 27.60 – 9210 – Selector lever downshifts Automatic transmission 722.3_4_5 (ra27057229210x)
│ ├── 27.60 – 9270 – Drive position B Automatic transmission 722.3_4_5 (ra27057229270x)
│ ├── 27.60 – 9280 – Kickdown cut-off Automatic transmission 722.3_4_5 (ra27057229280x)
│ ├── 27.60 – 9290 – Mode selector switch Automatic transmission 722.3_4_5 (ra27057229290x)
│ ├── 27.60 – 9300 – Transmission shift point retard Automatic transmission 722.3_4_5 (ra27057229300x)
│ ├── 27.60 – 9340 – Parking-shift lock Automatic Transmissions 722.3_4_5 (ra27057229340x)
│ ├── 27.60 – 9350 – Selected speed indicator of floor mounted shift Automatic transmission 722.3_4_5 (ra27057229350x)
│ ├── 27.60 – Adjusting shift rod (ar27.60-p-0980b)
│ ├── 27.60 – Adjusting wire cables for parking lock interlock (ar27.60-p-0965a)
│ ├── 27.60 – Adjusting wire cables for parking lock interlock (ar27.60-p-0965b)
│ ├── 27.60 – Adjust shift lock (ar27.60-p-0910a)
│ ├── 27.60 – Disassembling and assembling floor shift (ar27.60-p-0920b)
│ ├── 27.60 – Remove_install floor selector (ar27.60-p-0900b)
│ ├── 27.60 – Remove_install park pawl mechanism (ar27.60-p-0950a)
│ ├── 27.60 – Remove_install selector lever (ar27.60-p-0930a)
│ ├── 27.60 – Removing and installing wire cable for parking lock interlock (ar27.60-p-1000a)
│ └── 27.60 – Removing and installing wire cable for parking lock interlock (ar27.60-p-1000b)
├── 28_Transfer Case
│ ├── 28.00 – Capacities Passenger cars Transfer case (bf28.00-z-9999az)
│ ├── 28.00 – Forms Passenger cars Transfer case (of28.00-z-3999az)
│ ├── 28.00 – Technical modifications Passenger cars Transfer case (bt28.00-z-9999az)
│ ├── 28.00 – Test and adjustment values Passenger cars Transfer case (be28.00-z-9999az)
│ └── 28.00 – Tightening torques Passenger cars Transfer case – – ba28.00-z-9999az)
├── 29_Pedal Assembly
│ ├── 29.00 – Tightening torques Passenger cars Pedal assembly (ba29.00-z-9999az)
│ ├── 29.10 – Disassembling and assembling pedal assembly (ar29.10-p-0350a)
│ └── 29.10 – Removal and installation of foot controls (ar29.10-p-0300a)
├── 30_Throttle Control, Speed Control Systems
│ ├── 30.00 – Certificates Passenger cars Throttle control, cruise control system (of30.00-z-1999az)
│ ├── 30.00 – Programmed repair – Tempomat_cruise control – 30 Throttle control, Tempomat_cruise control (ra3000124pr00x)
│ ├── 30.00 – Technical modifications Passenger cars Throttle control, cruise control system (bt30.00-z-9999az)
│ ├── 30.00 – Test and adjustment values Passenger cars Throttle control, cruise control system (be30.00-z-9999az)
│ ├── 30.00 – Tightening torques Passenger cars Throttle control, cruise control system (ba30.00-z-9999az)
│ ├── 30.10 – Adjusting throttle control (ar30.10-p-1010ea)
│ ├── 30.10 – Adjusting throttle control (ar30.10-p-1010eb)
│ ├── 30.10 – Lubricate joint areas of throttle control, inspect for ease of operation and seating of joints (ap30.10-p-3022z)
│ ├── 30.10 – Lubricate joints of engine control system, check joints for freedom of movement and proper seating (ap30.10-p-3022za)
│ ├── 30.10 – Removing and installing throttle control cable (ar30.10-p-3400e)
│ ├── 30.12 – Remove_install accelerator pedal (ar30.12-p-1321d)
│ ├── 30.12 – Remove_install firewall pivot point with accelerator pedal lever (ar30.12-p-3022d)
│ ├── 30.12 – Technical modifications Cruise control, Tempomat Models 124, 129, 140, 201 (ra3000124ta00x)
│ ├── 30.16 – Cruise control system function description contents (gf30.16-p-0999a)
│ ├── 30.20 – 0000 – General, Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0000x)
│ ├── 30.20 – 0002 – Brief description of Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0002x)
│ ├── 30.20 – 0004 – Location of components, Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0004x)
│ ├── 30.20 – 0006 – Function description of Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0006x)
│ ├── 30.20 – 0008 – Individual functions of Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0008x)
│ ├── 30.20 – 0010 – Notes on towing as well as test and adjustment work (EA, CC, ISC) (ra3000tpm0010x)
│ ├── 30.20 – 6.2 – Electronic accelerator pedal (EFP) 11 – Diagnosis – Fault memory Engines 104, 119 LH (dh0602pm00011x)
│ ├── 30.20 – 6.2 – Electronic accelerator pedal (EFP) 12 – Diagnosis – Troubleshooting chart Engines 104, 119 LH (dh0602pm30012x)
│ ├── 30.20 – 6.2 – Electronic accelerator pedal (EFP) 21 – Test program – Electrics, Location of components Engines 104, 119 LH (dh0602pm30021x)
│ ├── 30.20 – 6.2 – Electronic accelerator pedal (EFP) 22 – Test program – Electrics, Prerequisites for testing Engines 104, 119 LH (dh0602pm30022x)
│ ├── 30.20 – 6.2 – Electronic accelerator pedal (EFP) 23 – Test program – Electrics, Test (EFP) Engines 104, 119 LH (dh0602pm00023x)
│ ├── 30.20 – 6.2 – Electronic accelerator pedal (EFP) 24 – Test program – Electrics, Test (TPM) Engines 104, 119 LH (dh0602pm30024x)
│ ├── 30.20 – Remove_install electronic accelerator actuator with valve fitting (ar30.20-p-1262a)
│ ├── 30.20 – Remove_install electronic accelerator actuator with valve fitting (ar30.20-p-1262e)
│ ├── 30.30 – 0500 – Functional description (Tempomat) (for manual transmission version valid to May 1993) Models 124, 129, 140, 201 (ra30001240500x)
│ ├── 30.30 – 0504 – Testing with an adapter (Tempomat) Models 124, 129, 140, 201 (ra30001240504x)
│ ├── 30.30 – 0506 – Testing the reference resistor (Tempomat) Models 124, 129, 140, 201 (ra30001240506x)
│ ├── 30.30 – 0545 – Removal and installation of the push button switch (Tempomat) A. Model 124, 129, 140, and 201 from approx. 04_84, B. Model 201 up to approx. 04_84 (ra30001240545x)
│ ├── 30.30 – 0565 – Removal and installation of the cruise control amplifier (Tempomat) A. Model 124, B. Model 129, C. Model 140, D. Model 201 (ra30001240565x)
│ ├── 30.30 – 0566 – Removal and installation of cruise control reference resistor (Tempomat) A. Model 124, B. Model 129, C. Model 140, D. Model 201 (ra30001240566x)
│ ├── 30.30 – 0575 – Removal and installation of switch on clutch pedal, to May 93 (Tempomat) Models 124, 129, 140, 201 (ra30001240575x)
│ ├── 30.30 – 0579 – Layout of the connectors (Tempomat) Models 124, 129, 201 (ra30001240579x)
│ ├── 30.30 – 0580.1 – Wiring diagrams (Tempomat) B. Model 124 with automatic transmission (ra30011240580x)
│ ├── 30.30 – 0580 – Wiring diagrams (Tempomat) Models 124, 129, 140, 201 (ra300a1240580x)
│ ├── 30.30 – 30.01 – Installation instructions Cruise control_Tempomat Model 129, LHD with automatic transmission (vehicles without ASR) (ea3001pb4es00x)
│ └── 30.30 – Service Information Warranty and goodwill policy for short-range radar sensors (si30.30-p-0003a)
├── 31_Frame, Trailer Operation
│ ├── 31.00 – Certificates Passenger cars Frame, trailer operation (of31.00-z-1999az)
│ ├── 31.00 – Forms Passenger cars Frame, trailer operation (of31.00-z-3999az)
│ ├── 31.00 – Test and adjustment values Passenger cars Frame, trailer operation (be31.00-z-9999az)
│ ├── 31.00 – Tightening torques Passenger cars Frame, trailer operation (ba31.00-z-9999az)
│ ├── 31.10 – 31.01 – Installation instructions, Trailer coupling A. Install trailer coupling, B. Install Electrical components (ea3101pb4es00x)
│ ├── 31.10 – Removing and installing trailer coupling (ar31.10-p-8000t)
│ ├── 31.11 – Lubricate and check operation of trailer hitch with detachable ball neck (ap31.11-p-3121ba)
│ └── 31.11 – Trailer hitch with detachable ball neck – clean after testing (ap31.11-p-3130z)
├── 32_Suspension
│ ├── 32.00 – 000 589 12 28 00 Knife (ws32.00-n-3046d)
│ ├── 32.00 – 116 589 00 17 00 Box wrench (ws32.00-p-0004b)
│ ├── 32.00 – 116 589 04 09 00 Retainer wrench (ws32.00-p-0007b)
│ ├── 32.00 – 124 589 00 09 00 Socket wrench (ws32.00-p-0014b)
│ ├── 32.00 – 124 589 19 21 00 Pulse counter (ws32.00-p-0015b)
│ ├── 32.00 – 126 589 12 63 00 Funnel (ws32.00-p-0016a)
│ ├── 32.00 – 126 589 14 21 00 Tester (ws32.00-p-0017b)
│ ├── 32.00 – 129 589 00 03 00 Box wrench (ws32.00-p-0018b)
│ ├── 32.00 – 129 589 00 63 00 35-pin test cable (ws32.00-p-0019b)
│ ├── 32.00 – 129 589 13 63 00 41-pin test cable (ws32.00-p-0020b)
│ ├── 32.00 – 140 589 04 63 00 Contacting module 4 (ws32.00-p-0021b)
│ ├── 32.00 – 140 589 14 63 00 Adapter (ws32.00-p-0022b)
│ ├── 32.00 – 202 589 01 31 00 Tensioning device (ws32.00-p-0040b)
│ ├── 32.00 – 202 589 02 31 00 Tensioning device (ws32.00-p-0041b)
│ ├── 32.00 – 202 589 13 63 00 Clamping plates (ws32.00-p-0042b)
│ ├── 32.00 – 32.10 – AMG Accessories Conversion to AMG sports suspension – Models 129.058_060_061_063_066_067 Vehicles without level control on rear axle (USA versions are excluded) (ea3210pez0000x)
│ ├── 32.00 – 32.10 – Appendix to Installation instructions Conversion to AMG sports suspension – Models 129.058_060_061_063_066_067 Vehicles without level control on rear axle (ea3210pez0a00x)
│ ├── 32.00 – 352 589 02 37 00 Pliers (ws32.00-n-3047c)
│ ├── 32.00 – Capacities Passenger cars Suspension (bf32.00-z-9999az)
│ ├── 32.00 – Locate noises from the suspension (ar32.00-p-2000a)
│ ├── 32.00 – Technical modifications Passenger cars Suspension (bt32.00-z-9999az)
│ ├── 32.00 – Test and adjustment values Passenger cars Suspension (be32.00-z-9999az)
│ ├── 32.00 – Tightening torques Passenger cars Suspension (ba32.00-z-9999az)
│ ├── 32.20 – Remove_install rear spring (ar32.20-p-0230a)
│ ├── 32.20 – Removing and installing front spring (ar32.20-p-0200a)
│ ├── 32.20 – Removing and installing torsion bar on front axle (ar32.20-p-0300a)
│ ├── 32.20 – Removing and installing torsion bar on rear axle (ar32.20-p-0315a)
│ ├── 32.25 – 0605 – Removing and installing front axle spring strut or shock absorber_ADS Level control with ADS A. Model 129 B. Model 140 (ra32001290605x)
│ ├── 32.25 – Checking shock absorber strut (ar32.25-p-0120a)
│ ├── 32.25 – Check shock absorber (ar32.25-p-0121a)
│ ├── 32.25 – Remove_install rear shock absorber (ar32.25-p-0110a)
│ ├── 32.25 – Removing and installing front shock absorber strut (ar32.25-p-0100a)
│ ├── 32.25 – Service Information Assembly of suspension struts and shock absorbers (si32.25-p-0004a)
│ ├── 32.25 – Service Information Replacement of shock absorbers (si32.25-p-0002a)
│ ├── 32.30 – Check and correct level control, 4MATIC, ASD, ADS fluid level (ap32.30-p-3211ba)
│ ├── 32.31 – Check pressure oil pump of level control (ar32.31-p-0510a)
│ ├── 32.31 – Empty_fill pressurized oil system on front and rear axle (ar32.31-p-0630a)
│ ├── 32.31 – Remove_install front axle damping valves (ar32.31-p-0685a)
│ ├── 32.31 – Remove_install rear axle suspension strut (ar32.31-p-0610a)
│ ├── 32.31 – Removing and installing front axle spring strut (ar32.31-p-0605a)
│ ├── 32.31 – Removing and installing level control valve unit (ar32.31-p-0650a)
│ ├── 32.31 – Removing and installing rear axle damper valve (ar32.31-p-0680a)
│ ├── 32.31 – Removing and installing rear axle spring actuator (ar32.31-p-0615a)
│ ├── 32.31 – Removing and installing rear axle spring actuator (ar32.31-p-0620a)
│ ├── 32.32 – 0610 – Rear strut assembly, Removal and installation Level control with ADS A. Model 129 B. Model 140 (ra32001290610x)
│ ├── 32.32 – 0615 – Front pressure accumulator, Removal and installation Level control with ADS Models 129, 140 (ra32001290615x)
│ ├── 32.32 – 0620 – Rear pressure accumulator, Removal and installation Level control with ADS A. Model 129, B. Model 140 (ra32001290620x)
│ ├── 32.32 – 0630 – Hydraulic system, Draining and refilling Level control with ADS A. Model 129 B. Model 140 (ra32001290630x)
│ ├── 32.32 – 0650 – Level control valve assembly, Removal and installation Level control with ADS Models 129, 140 (ra32001290650x)
│ ├── 32.32 – 0660 – Control_linkage rod on level controller, Removal and installation Level control with ADS A. thru D. Front and Rear axle Model 129, E. Rear axle Model 140 (ra32001290660x)
│ ├── 32.32 – 0665 – Front level controller, Removal and installation Level control with ADS Models 129, 140 (ra32001290665x)
│ ├── 32.32 – 0670 – Rear level controller, Removal and installation Level control with ADS A. Model 129 B. Model 140 (ra32001290670x)
│ ├── 32.32 – 0680 – Damper valves, Removal and installation Level control with ADS A. Front axle Model 129, B. Rear axle Model 129, C. Rear axle Model 140 (ra32001290680x)
│ ├── 32.32 – 3211 – Level control, 4MATIC, ASD, ADS Checking and correcting fluid level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3211pkw0000x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 11 – Diagnosis – function check Models 129.058_063_067_076, 140 (dh0302pf10011x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 12 – Diagnosis – fault memory Models 129.058_063_067_076, 140 (dh0302pf10012x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 13 – Diagnosis – troubleshooting chart Models 129.058_063_067_076, 140 (dh0302pf10013x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 21 – Test programme – electrical, Location of components Models 129.058_063_067_076, 140 (dh0302pf10021x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 22 – Test programme – electrical, Conditions for test Models 129.058_063_067_076, 140 (dh0302pf10022x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 23 – Test programme – electrical Testing Models 129.058_063_067_076, 140 (dh0302pf10023x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 31 – Test programme – hydraulical, Location of components Models 129.058_063_067_076, 140 (dh0302pf10031x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 32 – Test programme – hydraulical, Testing pressure oil pump Models 129.058_063_067_076, 140 (dh0302pf10032x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 33 – Test programme – hydraulical, Level control – function test Models 129.058_063_067_076, 140 (dh0302pf10033x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 34 – Test programme – hydraulical, Level control – pressure test Models 129.058_063_067_076, 140 (dh0302pf10034x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 35 – Test programme – hydraulical, Testing pressure reservoir Models 129.058_063_067_076, 140 (dh0302pf10035x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 36 – Test programme – hydraulical, Testing spring struts of front axle for leaks Models 129.058_063_067_076, 140 (dh0302pf10036x)
│ ├── 32.32 – 3.2 – Adaptive damping system (ADS) 37 – Test programme – hydraulical, Testing level adjustment (model 129) Models 129.058_063_067_076, 140 (dh0302pf10037x)
│ ├── 32.32 – Adaptive damping system (ADS II), function description, contents (gf32.32-p-0999a)
│ ├── 32.32 – Adaptive damping system (ADS II) with electronic level control diagnosis, contents (ad32.32-p-1000az)
│ ├── 32.32 – Remove_install comfort_sport switch (ar32.32-p-0517sl)
│ ├── 32.32 – Remove_install of wiring harness for adaptive damping system (ADS) (ar32.32-p-0505sl)
│ ├── 32.32 – Removing, installing ADS control unit (ar32.32-p-0500a)
│ ├── 32.32 – Replace (ADS) suspension control unit and adapt vehicle electrical system to control unit version (ar32.32-p-0501sl)
│ ├── 32.32 – Survey of system components, adaptive damping system (ADS II), location _ task _ design _ function (gf32.32-p-9999a)
│ └── 32.32 – Technical modifications Level control Models 129, 140 with ADS (ra3200129ta01x)
├── 33_Front Axle
│ ├── 33.00 – 000 589 00 34 00 Chuck (ws33.00-p-0001c)
│ ├── 33.00 – 0010 – Technical data Models 124, 129, 201 (ra33001240010x)
│ ├── 33.00 – 001 589 50 33 00 Puller (ws33.00-p-0003c)
│ ├── 33.00 – 116 589 22 33 00 Removal and installation tool (ws33.00-p-0016a)
│ ├── 33.00 – 124 589 00 43 00 Removal and installation tool (ws33.00-p-0019c)
│ ├── 33.00 – 129 589 03 43 00 Extraction and insertion tool (ws33.00-p-0059c)
│ ├── 33.00 – 129 589 06 21 00 Lever depresser (ws33.00-p-0029a)
│ ├── 33.00 – 140 589 00 01 00 Open-end wrench (ws33.00-p-0030c)
│ ├── 33.00 – 140 589 02 31 00 Spreader (ws33.00-p-0036c)
│ ├── 33.00 – 201 589 00 33 00 Puller (ws33.00-p-0044c)
│ ├── 33.00 – 201 589 01 43 00 Installation tool (ws33.00-p-0045c)
│ ├── 33.00 – 201 589 06 33 00 Installation tool (ws33.00-p-0051c)
│ ├── 33.00 – 201 589 10 23 00 Bracket (ws33.00-p-0060a)
│ ├── 33.00 – 201 589 10 33 00 Impact extractor (ws33.00-p-0052c)
│ ├── 33.00 – 202 589 00 15 00 Drift punch (ws33.00-p-0053c)
│ ├── 33.00 – 202 589 04 43 00 Extraction tool (ws33.00-p-0114b)
│ ├── 33.00 – 210 589 03 43 00 Extraction and insertion tool (ws33.00-p-0115b)
│ ├── 33.00 – 601 589 00 23 00 Measuring plate (ws33.00-p-0094c)
│ ├── 33.00 – Capacities Passenger cars Front axle (bf33.00-z-9999az)
│ ├── 33.00 – Forms Passenger cars Front axle (of33.00-z-3999az)
│ ├── 33.00 – Locate noises from the front axle (ar33.00-p-2000a)
│ ├── 33.00 – Service Information Threaded connections of rubber bushings and control arms (si33.00-p-0001a)
│ ├── 33.00 – Technical modifications Front axle Models 124, 129, 201 (ra3300124ta00x)
│ ├── 33.00 – Technical modifications Passenger cars Front axle (bt33.00-z-9999az)
│ ├── 33.00 – Test and adjustment values Passenger cars Front axle (be33.00-z-9999az)
│ ├── 33.00 – Tightening torques Passenger cars Front axle – – ba33.00-z-9999az)
│ ├── 33.10 – 0200 – Removal and installation of the front axle halves Models 124, 129, 201 (ra33001240200x)
│ ├── 33.10 – 0420 – Removal and installation of the steering knuckle arm Models 124, 129, 201 (ra33001240420x)
│ ├── 33.10 – 0440 – Replacement of the supporting joint Models 124, 129, 201 (ra33001240440x)
│ ├── 33.10 – 0526 – Replacement of the control arm mounting A. 2-piece mounting without clamping device, B. 2-piece mounting with clamping device, C. Single mounting with washer (ra33001240526x)
│ ├── 33.15 – 3353 – Checking condition of the front axle joints A. Supporting joint, B. Follower joint Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3353pkw0000x)
│ ├── 33.15 – 3355 – Checking the supporting joints with special tool Model 124 up to 6_93; 129 up to 6_93; 201 from 1_85 (wh3355pkw0000x)
│ ├── 33.20 – 0300 – Adjustment of the wheel bearing play Models 124, 129, 201 (ra33001240300x)
│ ├── 33.20 – 0310 – Removal and installation of the front wheel hub Models 124, 129, 201 (ra33001240310x)
│ ├── 33.20 – 0320 – Replacement of the front wheel hub Models 124, 129, 201 (ra33001240320x)
│ ├── 33.20 – Inspect front axle joint for play, inspect rubber boots (ap33.20-p-3353ba)
│ ├── 33.25 – 0400 – Removal and installation of the steering knuckle Models 124, 129, 201 (ra33001240400x)
│ └── 33.25 – 0430 – Replacement of boot for supporting joint of steering knuckle mounting Models 124, 129, 201 (ra33001240430x)
├── 35_Rear Axle
│ ├── 35.00 – 000 589 02 34 00 Collet chuck (ws35.00-p-0002c)
│ ├── 35.00 – 000 589 03 34 00 Thrust piece (ws35.00-p-0003c)
│ ├── 35.00 – 000 589 24 07 00 Box wrench for Allen socket (ws35.00-p-0004a)
│ ├── 35.00 – 000 589 33 34 00 Tensioning clamp (ws35.00-p-0005c)
│ ├── 35.00 – 000 589 34 34 00 Chuck (ws35.00-p-0006c)
│ ├── 35.00 – 000 589 38 19 00 Dial gage (ws35.00-p-0007c)
│ ├── 35.00 – 000 589 63 34 00 Extension (ws35.00-p-0008c)
│ ├── 35.00 – 001 589 49 21 00 Torque measuring instrument (ws35.00-p-0009b)
│ ├── 35.00 – 001 589 50 33 00 Puller (ws35.00-p-0010c)
│ ├── 35.00 – 111 589 08 23 00 Dial gauge holder (ws35.00-p-0012c)
│ ├── 35.00 – 115 589 04 61 00 Assembly drift (ws35.00-p-0018c)
│ ├── 35.00 – 115 589 05 21 00 Adjusting gauge (ws35.00-p-0019c)
│ ├── 35.00 – 116 589 00 35 00 Removal tool (ws35.00-p-0023c)
│ ├── 35.00 – 116 589 01 21 00 Measuring device (ws35.00-p-0025c)
│ ├── 35.00 – 116 589 07 21 00 Measuring device (ws35.00-p-0030c)
│ ├── 35.00 – 116 589 08 61 00 Assembly drift (ws35.00-p-0031c)
│ ├── 35.00 – 116 589 11 31 00 Clamping jaws (ws35.00-p-0035c)
│ ├── 35.00 – 116 589 11 61 00 Installer (ws35.00-p-0036c)
│ ├── 35.00 – 116 589 15 15 00 Drift (ws35.00-p-0038c)
│ ├── 35.00 – 116 589 18 61 00 Assembly drift (ws35.00-p-0040c)
│ ├── 35.00 – 117 589 02 07 00 Pin ring wrench (ws35.00-p-0041a)
│ ├── 35.00 – 123 589 06 15 00 Assembly drift (ws35.00-p-0043c)
│ ├── 35.00 – 123 589 08 33 00 Puller (ws35.00-p-0044c)
│ ├── 35.00 – 124 589 01 15 00 Drift punch (ws35.00-p-0045c)
│ ├── 35.00 – 124 589 01 35 00 Installation tool (ws35.00-p-0046c)
│ ├── 35.00 – 124 589 02 15 00 Drift (ws35.00-p-0048b)
│ ├── 35.00 – 124 589 02 34 00 Thrust piece (ws35.00-p-0229b)
│ ├── 35.00 – 124 589 02 43 00 Puller and installation tool (ws35.00-p-0049c)
│ ├── 35.00 – 124 589 05 43 00 Extraction and insertion tool (ws35.00-p-0050c)
│ ├── 35.00 – 124 589 07 21 00 Remote thermometer (ws35.00-p-0206c)
│ ├── 35.00 – 124 589 14 21 00 Measuring device (ws35.00-p-0051c)
│ ├── 35.00 – 124 589 19 21 00 Pulse counter (ws35.00-p-0053b)
│ ├── 35.00 – 124 589 21 21 00 Gage pins (ws35.00-p-0054c)
│ ├── 35.00 – 124 589 28 63 00 Test cable (ws35.00-p-0055b)
│ ├── 35.00 – 126 589 00 15 00 Drift (ws35.00-p-0057c)
│ ├── 35.00 – 126 589 00 21 00 Measuring device (ws35.00-p-0058c)
│ ├── 35.00 – 126 589 00 31 00 Spreader (ws35.00-p-0059c)
│ ├── 35.00 – 126 589 02 09 00 Socket wrench bit (ws35.00-p-0062b)
│ ├── 35.00 – 126 589 02 15 00 Assembly drift (ws35.00-p-0063c)
│ ├── 35.00 – 126 589 04 15 00 Drift punch (ws35.00-p-0064c)
│ ├── 35.00 – 126 589 08 21 00 Contact arm (ws35.00-p-0065c)
│ ├── 35.00 – 126 589 14 21 00 Tester (ws35.00-p-0066b)
│ ├── 35.00 – 129 589 00 31 00 Assembly bracket (ws35.00-p-0067c)
│ ├── 35.00 – 129 589 00 63 00 35-pin test cable (ws35.00-p-0069b)
│ ├── 35.00 – 129 589 01 03 00 Box wrench (ws35.00-p-0070b)
│ ├── 35.00 – 129 589 01 07 00 Pin wrench (ws35.00-p-0071b)
│ ├── 35.00 – 129 589 01 33 00 Puller (ws35.00-p-0072b)
│ ├── 35.00 – 129 589 01 43 00 Extraction and insertion tool (ws35.00-p-0073c)
│ ├── 35.00 – 129 589 02 33 00 Removal tool (ws35.00-p-0074c)
│ ├── 35.00 – 129 589 02 43 00 Removal and installation tool (ws35.00-p-0075c)
│ ├── 35.00 – 129 589 12 63 00 Test cable (ws35.00-p-0076b)
│ ├── 35.00 – 136 589 05 31 00 Retaining plate (ws35.00-p-0077c)
│ ├── 35.00 – 140 589 00 01 00 Open-end wrench (ws35.00-p-0078c)
│ ├── 35.00 – 140 589 00 08 00 Socket (ws35.00-p-0079c)
│ ├── 35.00 – 140 589 00 34 00 Collet chuck (ws35.00-p-0081c)
│ ├── 35.00 – 140 589 00 46 00 Drive flange (ws35.00-p-0082c)
│ ├── 35.00 – 140 589 01 09 00 Socket (ws35.00-p-0083c)
│ ├── 35.00 – 140 589 01 34 00 Collet chuck (ws35.00-p-0085c)
│ ├── 35.00 – 140 589 01 43 00 Installation tool (ws35.00-p-0086c)
│ ├── 35.00 – 140 589 01 62 00 Assembly support (ws35.00-p-0087b)
│ ├── 35.00 – 140 589 02 15 00 Drift punch (ws35.00-p-0088b)
│ ├── 35.00 – 140 589 02 34 00 Tensioning clamp (ws35.00-p-0089c)
│ ├── 35.00 – 140 589 03 15 00 Drift (ws35.00-p-0091c)
│ ├── 35.00 – 140 589 04 15 00 Sleeve (ws35.00-p-0094c)
│ ├── 35.00 – 140 589 04 63 00 Contacting module 4 (ws35.00-p-0096b)
│ ├── 35.00 – 140 589 05 31 00 Spreader (ws35.00-p-0155c)
│ ├── 35.00 – 140 589 06 15 00 Drift (ws35.00-p-0100c)
│ ├── 35.00 – 140 589 07 21 00 Measuring device (ws35.00-p-0102c)
│ ├── 35.00 – 140 589 08 15 00 Drift (ws35.00-p-0148b)
│ ├── 35.00 – 140 589 08 21 00 Backlash measuring instrument (ws35.00-p-0103c)
│ ├── 35.00 – 140 589 09 15 00 Drift punch (ws35.00-p-0105c)
│ ├── 35.00 – 140 589 10 15 00 Drift (ws35.00-p-0149c)
│ ├── 35.00 – 140 589 10 43 00 Removal and installation tool (ws35.00-p-0107c)
│ ├── 35.00 – 140 589 13 15 00 Drift (ws35.00-p-0192c)
│ ├── 35.00 – 140 589 14 15 00 Drift (ws35.00-p-0191c)
│ ├── 35.00 – 140 589 14 21 00 Measuring device (ws35.00-p-0156c)
│ ├── 35.00 – 140 589 14 63 00 Adapter (ws35.00-p-0112b)
│ ├── 35.00 – 140 589 16 15 00 Drift (ws35.00-p-0193c)
│ ├── 35.00 – 140 589 16 23 00 Measuring plate (ws35.00-p-0113c)
│ ├── 35.00 – 140 589 25 63 00 Magnet (ws35.00-p-0117c)
│ ├── 35.00 – 140 589 39 63 00 Test cable for module 6 (ws35.00-p-0151b)
│ ├── 35.00 – 140 589 40 63 00 Supports (2 ea.) (ws35.00-p-0157c)
│ ├── 35.00 – 140 589 41 63 00 Intermediate rings (x 2) (ws35.00-p-0158c)
│ ├── 35.00 – 201 589 00 34 00 Collet chuck (ws35.00-p-0121c)
│ ├── 35.00 – 201 589 01 33 00 Puller (ws35.00-p-0125b)
│ ├── 35.00 – 201 589 01 63 00 Stops (ws35.00-p-0128c)
│ ├── 35.00 – 201 589 02 31 00 Plate (ws35.00-p-0130c)
│ ├── 35.00 – 201 589 02 43 00 Removal and installation tool (ws35.00-p-0132c)
│ ├── 35.00 – 201 589 03 31 00 Assembly stand (ws35.00-p-0134c)
│ ├── 35.00 – 201 589 10 43 00 Puller and installation tool (ws35.00-p-0140c)
│ ├── 35.00 – 201 589 11 43 00 Puller and installation tool (ws35.00-p-0141c)
│ ├── 35.00 – 202 589 00 10 00 Retainer wrench (ws35.00-p-0178b)
│ ├── 35.00 – 202 589 00 23 00 Mounting fixture (ws35.00-p-0142c)
│ ├── 35.00 – 202 589 00 43 00 Removal and installation tool (ws35.00-p-0143c)
│ ├── 35.00 – 202 589 04 43 00 Extraction tool (ws35.00-p-0153c)
│ ├── 35.00 – 208 589 00 15 00 Drift (ws35.00-p-0179b)
│ ├── 35.00 – 210 589 01 40 00 Bracket (ws35.00-p-0160c)
│ ├── 35.00 – 210 589 02 43 00 Extraction and insertion tool (ws35.00-p-0147c)
│ ├── 35.00 – 210 589 03 43 00 Extraction and insertion tool (ws35.00-p-0154c)
│ ├── 35.00 – 210 589 04 43 00 Extractor tool (ws35.00-p-0159c)
│ ├── 35.00 – 211 589 00 61 00 Assembly tool (ws35.00-p-0026b)
│ ├── 35.00 – 220 589 01 63 00 Supports (ws35.00-p-0176b)
│ ├── 35.00 – 220 589 02 31 00 Clamping jaws (ws35.00-p-0175b)
│ ├── 35.00 – Capacities Passenger cars Rear axle (bf35.00-z-9999az)
│ ├── 35.00 – Data Sheet Adjustment of the rear axle gears Passenger vehicles Models 107, 126, 129, 140, 210 (wb6516lit7415z)
│ ├── 35.00 – Locate noises from rear axle (ar35.00-p-2000a)
│ ├── 35.00 – Service information Differential leaky (si35.00-p-0004a)
│ ├── 35.00 – Service Information Repair information on self-locking threaded connections at the axle mounts (si35.00-p-0005a)
│ ├── 35.00 – Service Information Threaded connections of rubber bushings and control arms (si35.00-p-0001a)
│ ├── 35.00 – Technical modifications Passenger cars Rear axle (bt35.00-z-9999az)
│ ├── 35.00 – Technical modifications Rear-axle center piece Rear-axle center piece with 210 mm dia. crown wheel (reinforced) Model 129, 140 (ra3500hmvta00x)
│ ├── 35.00 – Test and adjustment values Passenger cars Rear axle (be35.00-z-9999az)
│ ├── 35.00 – Tightening torques Passenger cars Rear axle – – ba35.00-z-9999az)
│ ├── 35.10 – 3501 – Oil change in the rear axle Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3501pkw0000x)
│ ├── 35.10 – 3510 – Rear axle, Checking and correction of oil level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3510pkw0000x)
│ ├── 35.10 – Remove_install complete rear axle (ar35.10-p-0010c)
│ ├── 35.10 – Remove_install front and rear rubber bushings in rear axle mount (ar35.10-p-0040c)
│ ├── 35.10 – Removing, installing rear rubber mount for center assembly mount in rear axle carrier (ar35.10-p-0050c)
│ ├── 35.20 – Remove_install camber strut (ar35.20-p-0110b)
│ ├── 35.20 – Remove_install radius rod (ar35.20-p-0111b)
│ ├── 35.20 – Remove_install rear axle shaft flange and angular ball bearing (ar35.20-p-0130b)
│ ├── 35.20 – Remove_install spring control arm, replace rubber bushing (ar35.20-p-0114b)
│ ├── 35.20 – Remove_install supporting joint at wheel carrier (wheel carrier installed) (ar35.20-p-0116b)
│ ├── 35.20 – Remove_install thrust arm (ar35.20-p-0113b)
│ ├── 35.20 – Remove_install track rod and replacement of rubber mount (ar35.20-p-0112b)
│ ├── 35.20 – Remove_install wheel carrier (ar35.20-p-0115b)
│ ├── 35.30 – Remove_install inside CV joint or rubber boots on rear axle shaft (ar35.30-p-0660a)
│ ├── 35.30 – Remove_install rear axle shaft (ar35.30-p-0620a)
│ ├── 35.31 – 0500 – Distinguishing features_installation survey for rear axle center piece Rear axle center piece with 210 mm dia. crown wheel (reinforced) Models 129, 140 (ra3500hmv0500x)
│ ├── 35.31 – 0550 – Rear axle center piece with 210 mm dia. crown wheel (reinforced) Models 129, 140 (ra3500hmv0550x)
│ ├── 35.31 – 0560 – Repair of the differential Standard differential with 210 mm dia. crown wheel (reinforced) Models 129, 140 (ra3500hmv0560x)
│ ├── 35.31 – Disassembling and assembling differential (ar35.31-p-0560a)
│ ├── 35.31 – Install new radial sealing ring at drive pinion gear (with differential installed) (ar35.31-p-0530c)
│ ├── 35.31 – Remove_install differential (ar35.31-p-0520c)
│ ├── 35.31 – Replace radial sealing ring on connecting flange of rear axle shaft (ar35.31-p-0540c)
│ ├── 35.31 – Service Information Change of oil filler screw and oil drain screw on rear axle center assembly (si35.31-p-0003a)
│ ├── 35.31 – Service Information Rear axle center assembly (si35.31-p-0001a)
│ ├── 35.31 – Service Information Rear axle gear (si35.31-p-0002a)
│ ├── 35.41 – Bleeding ASD hydraulic system (ar35.41-p-0519c)
│ └── 35.41 – Dismantling and assembling ASD differential (ar35.41-p-0560c)
├── 40_Wheels, Chassis Alignment Check
│ ├── 40.00 – 000 588 00 83 00 Tire mounting device (ws40.00-p-0006b)
│ ├── 40.00 – 000 588 01 19 00 Tester (ws40.00-p-0005b)
│ ├── 40.00 – 000 588 05 19 00 Inclinometer (ws40.00-p-0007b)
│ ├── 40.00 – 000 588 12 21 00 Balancing machine (ws40.00-p-0024b)
│ ├── 40.00 – 000 588 13 21 00 Wheel alignment system (ws40.00-p-0013b)
│ ├── 40.00 – 000 589 18 31 00 Brake pedal winch (ws40.00-p-0001b)
│ ├── 40.00 – 000 589 82 63 00 Mylon cord (ws40.00-p-0002b)
│ ├── 40.00 – 115 589 18 23 00 Locating device (ws40.00-p-0008b)
│ ├── 40.00 – 115 589 19 23 00 Securing fixture (ws40.00-p-0009b)
│ ├── 40.00 – 124 589 01 19 00 Telescopic measuring rod (ws40.00-p-0014c)
│ ├── 40.00 – 124 589 01 31 00 Quick clamping device (ws40.00-p-0015b)
│ ├── 40.00 – 124 589 02 19 00 Telescopic measuring rod (ws40.00-p-0016c)
│ ├── 40.00 – 124 589 04 21 00 Gage pins (ws40.00-p-0017c)
│ ├── 40.00 – 124 589 08 63 00 Connecting pieces (ws40.00-p-0018c)
│ ├── 40.00 – 124 589 17 63 00 Assembly tool (ws40.00-p-0021b)
│ ├── 40.00 – 124 589 20 63 00 Chain (ws40.00-p-0022b)
│ ├── 40.00 – 126 589 04 09 00 Socket wrench bit (ws40.00-p-0023a)
│ ├── 40.00 – 129 589 00 59 00 Removal tool (ws40.00-p-0101b)
│ ├── 40.00 – 129 589 01 21 00 Retainer device (ws40.00-p-0025b)
│ ├── 40.00 – 140 589 09 63 00 Measuring fixture set (ws40.00-p-0029c)
│ ├── 40.00 – 164 589 04 63 00 Retaining tube (ws40.00-p-0071c)
│ ├── 40.00 – 168 589 07 63 00 Measuring set (ws40.00-p-0046b)
│ ├── 40.00 – 170 589 00 63 00 Mount (ws40.00-p-0043c)
│ ├── 40.00 – 201 589 02 21 00 Measuring device (ws40.00-p-0033b)
│ ├── 40.00 – 201 589 11 31 00 Pulling device (ws40.00-p-0036b)
│ ├── 40.00 – 201 589 12 21 00 Level carrier (ws40.00-p-0037c)
│ ├── 40.00 – 211 589 00 31 00 Adapter for brake pedal winch (ws40.00-p-0047b)
│ ├── 40.00 – 211 589 06 23 00 Brake pad test gauge (ws40.00-p-0066a)
│ ├── 40.00 – 230 589 01 09 00 Socket wrench (ws40.00-p-0049b)
│ ├── 40.00 – Forms Passenger cars Wheels, chassis alignment check – – of40.00-z-3999az)
│ ├── 40.00 – General information on vehicle level measurement (ar40.00-p-0202a)
│ ├── 40.00 – Service Information Permissible valve caps for vehicles with tire pressure monitoring system (si40.00-p-0003a)
│ ├── 40.00 – Service Information Use of nitrogen as a tire-filling gas (si40.00-p-0004a)
│ ├── 40.00 – Technical modifications Passenger cars Wheels, chassis alignment check (bt40.00-z-9999az)
│ ├── 40.00 – Test and adjustment values Passenger cars Wheels, chassis alignment check – – be40.00-z-9999az)
│ ├── 40.00 – Tightening torques Passenger cars Wheels, chassis alignment check – – ba40.00-z-9999az)
│ ├── 40.10 – 40.00 – AMG Accessories Information for the Mercedes-Benz Organization specify wheel_tire combinations Model 124, 126, 129, 140, 170, 201, 202, 210 (ea4000pez0000x)
│ ├── 40.10 – 40.06 – AMG Accessories Conversion to 17-inch wheels (multi-piece disk wheels) Model 129 (ea4006pez0000x)
│ ├── 40.10 – 40.22 – AMG Accessories Conversion to 17-inch tyres (multi-piece disk wheel) Model 129 (ea4022pez0000x)
│ ├── 40.10 – 40.38 – AMG Accessories Conversion to one piece wheel, Model 129 Front axle 8 J x 18 H 2 ET 31, Rear axle 9 J x 18 H 2 ET 35 (ea4038pez0000x)
│ ├── 40.10 – 40.39 – AMG Accessories Conversion to 245_40 ZR 18 tyres and 8 J x 18 H 2 ET 31 disk wheel Model 129 (ea4039pez0000x)
│ ├── 40.10 – 4050 – Removal_Mounting of the wheels, Rotating if required Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4050pkw0000x)
│ ├── 40.10 – 4051 – Checking tire for condition and damage, Measurement of tread depth Model 107 from 8_85, 123, 124, 129, 140 up to 6_93, 126 from 9_85, 201 from 1_85 (wh4051pkw0000x)
│ ├── 40.10 – 4060 – Correction of the tire pressure Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4060pkw0000x)
│ ├── 40.10 – 4070 – Retightening the wheel bolts Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4070pkw0000x)
│ ├── 40.10 – Balancing wheels (ar40.10-p-1040a)
│ ├── 40.10 – Checking tires for lateral and radial runout (ar40.10-p-1025a)
│ ├── 40.10 – Check tires for damage and crack formations (ap40.10-p-4051z)
│ ├── 40.10 – General overview of approved wheel_tire combinations in as-built configuration (gf40.10-p-0804a)
│ ├── 40.10 – Overview of tire checks for damage and crack formation (ap40.10-p-4048u)
│ ├── 40.10 – Perform smooth operation optimization (ar40.10-p-3201a)
│ ├── 40.10 – Remove_install wheels, rotate if necessary (ap40.10-p-4050z)
│ ├── 40.10 – Replace tires (ar40.10-p-1030a)
│ ├── 40.10 – Retrofit AMG disk wheels (composite) (az40.10-p-0001a)
│ ├── 40.10 – Retrofit AMG disk wheels (single-part) (az40.10-p-0002e)
│ ├── 40.10 – Service Information bulletin TIREFIT tire sealant (si40.10-p-0020a)
│ ├── 40.10 – Service Information Clean light alloy disk wheel (si40.10-p-0022a)
│ ├── 40.10 – Service Information Cosmetic processing of light alloy wheels (si40.10-p-0026a)
│ ├── 40.10 – Service information It is not permissible to use lead balancing weights (si40.10-p-0015a)
│ ├── 40.10 – Service information Radial crack in light alloy disk wheel (si40.10-p-0023a)
│ ├── 40.10 – Service information Wheel bolts (si40.10-p-0005a)
│ ├── 40.20 – Adjusting ball point position (ar40.20-p-0321a)
│ ├── 40.20 – Attaching Mercedes-Benz quick-clamping devices (ar40.20-p-0230a)
│ ├── 40.20 – Chassis alignment test sheet Passenger cars (wb6516lit7434z)
│ ├── 40.20 – Check and adjust camber and caster at front axle (ar40.20-p-0322a)
│ ├── 40.20 – Check and adjust front axle toe-in (ar40.20-p-0323a)
│ ├── 40.20 – Check and adjust toe on rear axle (ar40.20-p-0332a)
│ ├── 40.20 – Check ball point position (ar40.20-p-0320a)
│ ├── 40.20 – Checking rear axle camber (ar40.20-p-0331a)
│ ├── 40.20 – Checking toe-out on turns (ar40.20-p-0325a)
│ ├── 40.20 – Checking vehicle level at front and rear axles (ar40.20-p-0300a)
│ ├── 40.20 – Checking vehicle level at front and rear axles (ar40.20-p-0300d)
│ ├── 40.20 – Checking vehicle level at front and rear axles (ar40.20-p-0300e)
│ ├── 40.20 – General information on wheel alignment (ar40.20-p-0201a)
│ ├── 40.20 – Perform chassis alignment check (ar40.20-p-0200a)
│ ├── 40.20 – Service Information for chassis alignment system (si40.20-p-0002a)
│ ├── 40.20 – Service Information Operation texts and work units for chassis alignment (si40.20-p-0005a)
│ ├── 40.30 – Carry out distance and comparison measurements on front and rear axles (ar40.30-p-0402a)
│ ├── 40.30 – Check accidents vehicles and vehicles in which accident damage is suspected (ar40.30-p-0400a)
│ ├── 40.30 – Checking alignment of spring control arm, camber strut, strut rod, thrust arm and tie rod on rear axle (ar40.30-p-0420a)
│ ├── 40.30 – Measuring lower wishbone (when removed) (ar40.30-p-0452a)
│ ├── 40.30 – Measuring rear axle carrier (when removed) (ar40.30-p-0410a)
│ ├── 40.30 – Measuring steering knuckle (ar40.30-p-0451a)
│ ├── 40.30 – Measuring wheel carrier (when removed) (ar40.30-p-0425a)
│ └── 40.30 – Preparations for dimensional and comparative measurement (ar40.30-p-0401a)
├── 41_Propeller Shaft
│ ├── 41.00 – 116 589 09 43 00 Removal and installation tool (ws41.00-p-0001c)
│ ├── 41.00 – 126 589 00 01 00 Open-end wrench (ws41.00-p-0002b)
│ ├── 41.00 – 126 589 03 15 00 Drift (ws41.00-p-0003c)
│ ├── 41.00 – 129 589 00 34 00 Puller arms (ws41.00-p-0004c)
│ ├── 41.00 – Capacities Passenger cars Propeller shaft (bf41.00-z-9999az)
│ ├── 41.00 – Forms Passenger cars Propeller shaft (of41.00-z-3999az)
│ ├── 41.00 – Technical modifications Passenger cars Propeller shaft (bt41.00-z-9999az)
│ ├── 41.00 – Test and adjustment values Passenger cars Propeller shaft – – be41.00-z-9999az)
│ ├── 41.00 – Tightening torques Passenger cars Propeller shaft – – ba41.00-z-9999az)
│ ├── 41.10 – 4152 – Checking the propeller shaft companion plates for wear Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4152pkw0000x)
│ ├── 41.10 – Check propeller shaft flexible couplings for signs of damage and deformation (ap41.10-p-4152z)
│ ├── 41.10 – Measure propeller shaft alignment using mechanical propeller shaft articulated angle measuring device (ar41.10-p-0085a)
│ ├── 41.10 – Removal and installation of propeller shaft intermediate bearing and replacement of grooved ball bearing (ar41.10-p-0100da)
│ ├── 41.10 – Remove_install propeller shaft (ar41.10-p-0050a)
│ └── 41.10 – Replacing centering sleeve (ar41.10-p-0200da)
├── 42_Brakes – Hydraulic & Mechanical Systems
│ ├── 42.00 – 000 588 05 21 00 Roller brake test stand (ws42.00-p-0006b)
│ ├── 42.00 – 000 588 07 21 00 Test equipment (ws42.00-p-0014b)
│ ├── 42.00 – 000 589 26 68 00 Brake caliper brush (ws42.00-p-0002a)
│ ├── 42.00 – 000 589 35 23 00 Inspection gauge (ws42.00-p-0004c)
│ ├── 42.00 – 000 589 49 37 00 Pliers (ws42.00-n-0005c)
│ ├── 42.00 – 000 589 50 37 00 Pliers (ws42.00-n-0007c)
│ ├── 42.00 – 000 589 52 43 00 Resetting device (ws42.00-p-0009a)
│ ├── 42.00 – 0009 – Notes on accident prevention on the brake roller dynamometers T2 model 668-670 with air-pressure power braking (ra4302dfk0009x)
│ ├── 42.00 – 0702 – Important information on repairs Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240702x)
│ ├── 42.00 – 0810 – Notes for towing, or test and repair work, and handling ASR components on vehicles following an accident Brakes ASR II Models 124, 126, 129, 201, ASR III Model 140 (ra42001400810x)
│ ├── 42.00 – 112 589 09 61 00 Installation tool (ws42.00-n-0012b)
│ ├── 42.00 – 116 589 01 62 00 Removal and installation tool (ws42.00-p-0017b)
│ ├── 42.00 – 123 589 13 33 00 Lever (ws42.00-p-0018a)
│ ├── 42.00 – 124 589 19 21 00 Pulse counter (ws42.00-p-0021b)
│ ├── 42.00 – 126 589 09 21 00 Test adapter for ABS (ws42.00-n-0023b)
│ ├── 42.00 – 126 589 15 63 00 Protective adapter (ws42.00-p-0024b)
│ ├── 42.00 – 129 589 11 63 00 Snap-release tool (ws42.00-n-0027b)
│ ├── 42.00 – 140 589 00 19 00 Caliper gauge (ws42.00-p-0028a)
│ ├── 42.00 – 140 589 03 09 00 Socket wrench (ws42.00-p-0032b)
│ ├── 42.00 – 140 589 04 63 00 Contacting module 4 (ws42.00-p-0033b)
│ ├── 42.00 – 140 589 14 63 00 Adapter (ws42.00-p-0034b)
│ ├── 42.00 – 140 589 45 63 00 -pin test cable (ws42.00-p-0038b)
│ ├── 42.00 – 140 589 50 63 00 Test cable 16-pin (ws42.00-p-0039b)
│ ├── 42.00 – 168 589 08 63 00 Test connection (ws42.00-p-0044b)
│ ├── 42.00 – 201 589 13 21 00 Vacuum tester (ws42.00-p-0036b)
│ ├── 42.00 – 220 589 01 31 00 Guard plate (ws42.00-p-0042b)
│ ├── 42.00 – 352 589 02 37 00 Pliers (ws42.00-n-3022c)
│ ├── 42.00 – 4210 – Brake system, Checking the fluid level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4210pkw0000x)
│ ├── 42.00 – 4290 – Brake test on the test bench or test drive Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4290pkw0000x)
│ ├── 42.00 – 601 589 07 63 00 Wedge (ws42.00-n-3005b)
│ ├── 42.00 – Brake test (ap42.00-p-4290ba)
│ ├── 42.00 – Capacities Passenger cars Brakes – hydraulic and mechanical systems (bf42.00-z-9999az)
│ ├── 42.00 – Forms Passenger cars Brakes – hydraulic and mechanical systems (of42.00-z-3999az)
│ ├── 42.00 – Locate noises from the brake (ar42.00-p-2000a)
│ ├── 42.00 – Replace brake fluid (ap42.00-p-4280a)
│ ├── 42.00 – Replace brake fluid (ap42.00-p-4280bb)
│ ├── 42.00 – Replace brake fluid (ap42.00-p-4280bc)
│ ├── 42.00 – Technical modifications Brakes ASR Models 124, 126, 129, 140, 201.02 with ABS (ra4200140ta00x)
│ ├── 42.00 – Technical modifications Brakes ASR Models 124, 126, 129, 140, 201, 202 (ra4200202ta00x)
│ ├── 42.00 – Technical modifications Passenger cars Brakes – hydraulic and mechanical systems (bt42.00-z-9999az)
│ ├── 42.00 – Test and adjustment values Passenger cars Brakes – hydraulic and mechanical systems – – be42.00-z-9999az)
│ ├── 42.00 – Tightening torques Passenger cars Brakes – hydraulic and mechanical systems – – ba42.00-z-9999az)
│ ├── 42.00 – Traction systems (ABS, ASR, ETS) and SPS diagnosis, contents (ad42.00-p-1000az)
│ ├── 42.10 – Bleed brake system (ar42.10-p-0010a)
│ ├── 42.10 – Brake system – inspect fluid level (ap42.10-p-4210z)
│ ├── 42.10 – Check brake lining thickness (ap42.10-p-4253am)
│ ├── 42.10 – Inspect condition of brake disks (ap42.10-p-4258am)
│ ├── 42.10 – Remove_check_install front axle brake pads (ar42.10-p-1600dm)
│ ├── 42.10 – Remove_install brake disc (ar42.10-p-0220a)
│ ├── 42.10 – Remove_install front axle brake caliper (ar42.10-p-0070am)
│ ├── 42.10 – Remove_install rear axle brake caliper (ar42.10-p-0080am)
│ ├── 42.10 – Remove_install stepped tandem master brake cylinder (ar42.10-p-0310a)
│ ├── 42.10 – Removing and installing mechanical stop lamp switch (ar42.10-p-0040a)
│ ├── 42.10 – Removing, checking and installing rear axle brake pads (ar42.10-p-1700am)
│ ├── 42.10 – Repair fixed brake caliper of rear axle (ar42.10-p-0151a)
│ ├── 42.10 – Repairing fixed caliper on front axle (ar42.10-p-0150a)
│ ├── 42.10 – Repairing stepped tandem brake master cylinder (ar42.10-p-0315a)
│ ├── 42.10 – Replace brake hoses (ar42.10-p-0013a)
│ ├── 42.10 – Service Information Brake caliper with Mercedes-Benz brand cover (si42.10-p-0025a)
│ ├── 42.10 – Service Information Brake hose (si42.10-p-0003b)
│ ├── 42.10 – Service Information Brake lining installation instructions (si42.10-p-0002a)
│ ├── 42.10 – Test brake system with pressure tester for leaks (ar42.10-p-0015a)
│ ├── 42.20 – 4256 – Checking the parking brake control cables for easy operation Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4256pkw0000x)
│ ├── 42.20 – 4261 – Readjustment of the parking brake (once at 20,000 km) Models 107 from 08_85; 124, 129 to 06_93; 126 from 09_85; 201 from 01_85 (wh4261pkw0002x)
│ ├── 42.20 – Adjust parking brake (ap42.20-p-4261ba)
│ ├── 42.20 – Adjust parking brake (ar42.20-p-0540a)
│ ├── 42.20 – Check operation of parking brake cables (ap42.20-p-4256z)
│ ├── 42.20 – Remove_install brake shoes of parking brake (ar42.20-p-0530a)
│ ├── 42.20 – Remove_install front brake cable (ar42.20-p-0520a)
│ ├── 42.20 – Remove_install parking brake pedal assembly (ar42.20-p-0510a)
│ ├── 42.20 – Removing and installing rear brake control cable (ar42.20-p-0525a)
│ ├── 42.30 – 0700 – A. Design and function of anti-lock braking system (A thru C) Models 124, 129, 140, 201, Model 202 up to 08_95 (ra4200124a700x)
│ ├── 42.30 – 0700 – B. Design and function of anti-lock braking system (D thru F) Models 124, 129, 140, 201, Model 202 up to 08_95 (ra4200124b700x)
│ ├── 42.30 – 0705 – Removal and installation of the hydraulic unit (A7), ABS Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240705x)
│ ├── 42.30 – 0708 – Removal and installation of ABS control unit A. Model 124 (except 124.034), 129.060_061_066, 201, Model 202 up to 08_95 B. Model 124.034, 129.058_063, 140 (ra42001240708x)
│ ├── 42.30 – 0710 – Removal and installation of relays for solenoid valve charge_return pump Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240710x)
│ ├── 42.30 – 0712 – Removal and installation of the front wheel speed sensors, ABS A. Model 124, 201, B. Model 129, 140, C. Model 202 up to 08_95 (ra42001240712x)
│ ├── 42.30 – 0714 – Removal and installation of the rear wheel speed sensor ABS A. Model 124, 201, B. Model 129, 140, C. Model 202 up to 08_95 (ra42001240714x)
│ ├── 42.30 – 0725 – Function and test of 5 – 7 and 9 pin relays Overvoltage protection from 09_85 Models 124, 129, 140, 201, 202 up to 08_95 (ra42001240725x)
│ ├── 42.30 – 0730 – Test instructions for the ABS tester with fault memory ABS Tester Part no.124 589 22 21 00 Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240730x)
│ ├── 42.30 – 6.1 – Anti-lock braking system (ABS) 11 – Diagnosis, Troubleshooting chart Model 129 without module box (dh0601pf20011x)
│ ├── 42.30 – 6.1 – Anti-lock braking system (ABS) 21 – Test programme – electrics, Location of components Model 129 without module box (dh0601pf20021x)
│ ├── 42.30 – 6.1 – Anti-lock braking system (ABS) 22 – Test programme – electrical, Conditions for test Model 129 without module box (dh0601pf20022x)
│ ├── 42.30 – 6.1 – Anti-lock braking system (ABS) 23 – Test programme – electrics, Testing Model 129 without module box (dh0601pf20023x)
│ ├── 42.30 – 6.2 – Anti-lock braking system (ABS) 11 – Diagnosis – fault memory Models 124.034 and 129 with module box, Model 140 (dh0602pf20011x)
│ ├── 42.30 – 6.2 – Anti-lock braking system (ABS) 12 – Diagnosis, Troubleshooting chart Models 124.034 and 129 with module box, Model 140 (dh0602pf20012x)
│ ├── 42.30 – 6.2 – Anti-lock braking system (ABS) 21 – Test programme – electrics, Location of components Models 124.034 and 129 with module box, Model 140 (dh0602pf20021x)
│ ├── 42.30 – 6.2 – Anti-lock braking system (ABS) 22 – Test programme – electrics, Conditions for test Models 124.034 and 129 with module box, Model 140 (dh0602pf20022x)
│ ├── 42.30 – 6.2 – Anti-lock braking system (ABS) 23 – Test programme – electrics, Testing Models 124.034 and 129 with module box, Model 140 (dh0602pf20023x)
│ ├── 42.30 – Remove_install left front or right rpm sensor (ar42.30-p-0712a)
│ ├── 42.30 – Remove_install pulse ring (ar42.30-p-0715a)
│ ├── 42.30 – Service Information Notes for handling multipole rings (si42.30-p-0004a)
│ ├── 42.31 – Brake Assist (BAS), contents, function description (gf42.31-p-0999a)
│ ├── 42.31 – Brake Assist (BAS) diagnosis, contents (ad42.31-p-1000az)
│ ├── 42.31 – Checking brake assist system (BAS) (sm42.31-p-0001b)
│ ├── 42.31 – Overview of Braking Assistant (BAS) system components – Location_Function_Design_function (gf42.31-p-9999a)
│ ├── 42.31 – Removing and installing BAS control module (ar42.31-p-6001a)
│ ├── 42.31 – Removing and installing BAS diaphragm travel sensor (ar42.31-p-6002a)
│ ├── 42.31 – Testing Brake Assist System (BAS) (sm42.31-p-0001a)
│ ├── 42.35 – Contents, function description, electronic traction system (ETS) (gf42.35-p-0999a)
│ ├── 42.35 – Electronic traction system (ETS) diagnosis contents (ad42.35-p-1001az)
│ ├── 42.40 – 0816 – Removal and installation of the ASR hydraulic unit (A7_3) Brakes ASR II Models 124, 126, 129, 201, ASR III Model 140 (ra42001400816x)
│ ├── 42.40 – 0818 – Removal and installation of the ASR pressurizing pump (M15) Brakes ASR II Models 124, 126, 129, 201, ASR III Model 140 (ra42001400818x)
│ ├── 42.40 – 0819 – Removal and installation of the accumulator – ASR II, III A. Models 124, 126, 201, B. Model 129, C. Model 140 (ra42001400819x)
│ ├── 42.40 – 0820 – Removal and installation of left or right rear axle speed sensors (L6_3, L6_4) – Brakes ASR II, III Models 124, 126, 129, 201, 140 (ra42001400820x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 11 – Diagnosis, Function check Model 129 without module box (dh0501pf20011x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 12 – Diagnosis, Troubleshooting chart Model 129 without module box (dh0501pf20012x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 21 – Test programme – electrics, Location of components Model 129 without module box (dh0501pf20021x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 22 – Test programme – electrics, Conditions for test Model 129 without module box (dh0501pf20022x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 23 – Test programme – electrics, Testing Model 129 without module box (dh0501pf20023x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 31 – Test programme – hydraulics, Location of components Model 129 without module box (dh0501pf20031x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 32 – Test programme – hydraulics, Conditions for test Model 129 without module box (dh0501pf20032x)
│ ├── 42.40 – 5.1 – Acceleration skid control (ASR) 33 – Test programme – hydraulics, Testing Model 129 without module box (dh0501pf20033x)
│ ├── 42.40 – 5.2 – Acceleration skid control (ASR) 11 – Diagnosis – function check, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20011x)
│ ├── 42.40 – 5.2 – Acceleration skid control (ASR) 12 – Diagnosis – fault memory, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20012x)
│ ├── 42.40 – 5.2 – Acceleration skid control (ASR) 13 – Diagnosis – troubleshooting chart, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20013x)
│ ├── 42.40 – 5.2 – Acceleration skid control (ASR) 23 – Test programme – electrical Testing, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20023x)
│ ├── 42.40 – 5.2 – Acceleration skid control (ASR) 33 – Test programme – hydraulical, Testing, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20033x)
│ ├── 42.40 – 9.1 – Traction systems (ASR,ETS) and SPS 11 – Diagnosis – Function check (ASR only) Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00011x)
│ ├── 42.40 – 9.1 – Traction systems (ASR,ETS) and SPS 12 – Diagnosis – Fault memory Model 129, 140 as of 06_94 (dh0901pf00012x)
│ ├── 42.40 – 9.1 – Traction systems (ASR,ETS) and SPS 13 – Diagnosis – Troubleshooting chart Model 129, 140 as of 06_94 (dh0901pf00013x)
│ ├── 42.40 – 9.1 – Traction systems (ASR,ETS) and SPS 21 – Test program – Electrical systems Arrangement of components Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00021x)
│ ├── 42.40 – 9.1 – Traction systems (ASR,ETS) and SPS 22 – Test program – Electrical systems Prerequisites for testing Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00022x)
│ ├── 42.40 – 9.1 – Traction systems (ASR,ETS) and SPS 23 – Test program – Electrics, Testing Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00023x)
│ ├── 42.40 – Acceleration slip regulation (ASR) diagnosis contents (ad42.40-p-1000az)
│ ├── 42.40 – Contents, function description, acceleration slip regulation (ASR V) (gf42.40-p-0999a)
│ ├── 42.40 – Remove_install ETS_ASR_ESP hydraulic unit (ar42.40-p-0816a)
│ ├── 42.40 – Remove_install left or right rear axle speed sensor (ar42.40-p-0820a)
│ ├── 42.45 – Electronic stability program (ESP) and SPS diagnosis contents (ad42.45-p-1001az)
│ ├── 42.45 – Removing and installing ESP charge plunger unit (ar42.45-p-0819a)
│ ├── 42.45 – Removing and installing ESP charging pump (ar42.45-p-0818a)
│ └── 42.45 – Table of contents Functional description, Electronic Stability Program (ESP) (gf42.45-p-0999a)
├── 43_Brakes – Pheumatic System & Auxiliary Brakes
│ ├── 43.00 – Test and adjustment values Passenger cars Brakes – pneumatic system and auxiliary brakes (be43.00-z-9999az)
│ ├── 43.00 – Tightening torques Passenger cars Brakes – pneumatic system and auxiliary brakes – – ba43.00-z-9999az)
│ ├── 43.10 – Checking brake booster (ar43.10-p-0325a)
│ ├── 43.10 – Checking check valve (ar43.10-p-0023a)
│ └── 43.10 – Removing and installing brake booster (ar43.10-p-0350a)
├── 46_Steering
│ ├── 46.00 – 0002 – Overview of the power steering pumps (LHP)_tandem pumps (TANP) Steering gear 765.9 (ra46097650002x)
│ ├── 46.00 – 000 589 69 03 00 Box wrench bit (ws46.00-p-0002b)
│ ├── 46.00 – 000 589 70 03 00 Box wrench bit (ws46.00-p-0003b)
│ ├── 46.00 – 0005 – General Function description Steering Models 124, 129, 140, 201, 202 (ra4600fbl0005x)
│ ├── 46.00 – 0006 – Functional survey Models 124, 129, 140, 201, 202 (ra4600fbl0006x)
│ ├── 46.00 – 0020 – Design and function of the electrical components in PARAMETER STEERING A.-F. Design and function, G. Instructions for test and repair work Steering 760.7_765.9 (ra4600fbl0020x)
│ ├── 46.00 – 0060 – Design and function of the tandem pump A. Tandem pump designation, B. Drive, C. Oil delivery, D. Pressure limits Models 124, 129, 140, 201, 202 (ra4600fbl0060x)
│ ├── 46.00 – 115 589 08 61 00 Installation tool (ws46.00-p-0006b)
│ ├── 46.00 – 123 589 02 21 00 Torque wrench (ws46.00-p-0021a)
│ ├── 46.00 – 124 589 06 21 00 Tester (ws46.00-n-0030b)
│ ├── 46.00 – 124 589 19 63 00 Connection fittings (ws46.00-p-0032b)
│ ├── 46.00 – 126 589 00 10 00 Screwdriver bit (ws46.00-p-0033b)
│ ├── 46.00 – 126 589 13 63 00 Mounting fixture (ws46.00-p-0035a)
│ ├── 46.00 – 129 589 00 33 00 Puller (ws46.00-p-0037b)
│ ├── 46.00 – 129 589 02 07 00 Pin wrench (ws46.00-p-0038c)
│ ├── 46.00 – 129 589 07 21 00 Friction torque meter (ws46.00-p-0086b)
│ ├── 46.00 – 129 589 10 63 00 Thrust piece (ws46.00-p-0039b)
│ ├── 46.00 – 140 589 01 15 00 Drift (ws46.00-p-0043c)
│ ├── 46.00 – 140 589 17 63 00 Connection fitting (ws46.00-p-0052b)
│ ├── 46.00 – 201 589 01 33 00 Puller (ws46.00-p-0053b)
│ ├── 46.00 – 202 589 00 14 00 Shell (ws46.00-p-0062b)
│ ├── 46.00 – 210 589 00 07 00 Claw-type wrench for rosette on ignition_starter switch (ws46.00-p-0065b)
│ ├── 46.00 – 210 589 09 63 00 Connection fitting (ws46.00-p-0067b)
│ ├── 46.00 – 215 589 01 63 00 Connection fitting (ws46.00-p-0079b)
│ ├── 46.00 – Capacities Passenger cars Steering (bf46.00-z-9999az)
│ ├── 46.00 – Checking and adjusting oil level in power steering (ap46.00-p-4611ba)
│ ├── 46.00 – Forms Passenger cars Steering (of46.00-z-3999az)
│ ├── 46.00 – Inspect play of track rod and drag link joints, inspect rubber boots (ap46.00-p-4653ba)
│ ├── 46.00 – Locate noises from the steering (ar46.00-p-2000a)
│ ├── 46.00 – Service Information Redocumentation of steering gear in VeDoc (si46.00-p-0001a)
│ ├── 46.00 – Technical modifications Passenger cars Steering (bt46.00-z-9999az)
│ ├── 46.00 – Technical modifications Power steering pumps Steering gear 765.9 with power steering pump in Models 124, 129, 140, 201, 202 (ra4609765ta00x)
│ ├── 46.00 – Test and adjustment values Passenger cars Steering (be46.00-z-9999az)
│ ├── 46.00 – Tightening torques Passenger cars Steering – – ba46.00-z-9999az)
│ ├── 46.10 – 0003 – Steering wheel survey Models 124, 129, 140, 201, 202 (ra4600fbl0003x)
│ ├── 46.10 – 0233 – Disassembly and assembly of the pitman arm shaft_bearing cover Steering gear 765.9 (ra46097650233x)
│ ├── 46.10 – 0615 – Function of the electrically adjustable jacket tube Function Description Steering (ra4600fbl0615x)
│ ├── 46.10 – 0616 – Function of the manually adjustable jacket tube Function Description Steering (ra4600fbl0616x)
│ ├── 46.10 – 0617 – Function of contact spiral between steering column tube_steering wheel (ra4600fbl0617x)
│ ├── 46.10 – Disassemble_assemble electrically adjustable steering column tube (ar46.10-p-0600a)
│ ├── 46.10 – Dismantling and assembling rigid jacket tube (ar46.10-p-0500a)
│ ├── 46.10 – Remove_install clock spring contact (ar46.10-p-0200a)
│ ├── 46.10 – Removing and installing jacket tube (ar46.10-p-0400a)
│ ├── 46.10 – Removing and installing lock cylinder (ar46.10-p-0800a)
│ ├── 46.10 – Removing and installing lock cylinder (ar46.10-p-0800c)
│ ├── 46.10 – Removing and installing steering angle sensor (ar46.10-p-0300a)
│ ├── 46.10 – Removing and installing steering angle sensor (ar46.10-p-0300b)
│ ├── 46.10 – Removing and installing steering lock (ar46.10-p-0900a)
│ ├── 46.10 – Removing and installing steering wheel (ar46.10-p-0100a)
│ ├── 46.10 – Removing and installing steering wheel (ar46.10-p-0100b)
│ ├── 46.10 – Service Information Warranty and goodwill policies for steering wheels (si46.10-p-0006a)
│ ├── 46.14 – 4650 – Checking the play in the steering Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4650pkw0000x)
│ ├── 46.14 – 4671 – Retightening mounting bolts for steering Model 107 from 8_85; 123; 124, 129 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4671pkw0000x)
│ ├── 46.20 – 0001 – Overview of the steering gears Steering gear 765.9 (ra46097650001x)
│ ├── 46.20 – 0001 – Steering gear survey Steering gear 760.700, 765.9 (ra4600fbl0001x)
│ ├── 46.20 – 0120 – Check and adjust the friction torque of the steering gear Steering gear 765.9 (ra46097650120x)
│ ├── 46.20 – 0140 – Replacement of the steering gear when performing repairs to a vehicle involved in an accident Steering gear 765.9 (ra46097650140x)
│ ├── 46.20 – 0238 – Removal, installation and checking of the control valve A. Conventional control valve, B. Control valve on parameter steering Steering gear 765.9 (ra46097650238x)
│ ├── 46.20 – Adjusting steering gear in vehicle (ar46.20-p-0100a)
│ ├── 46.20 – Remove_install steering gear (ar46.20-p-0500b)
│ ├── 46.20 – Replacing sealing ring in lower steering gear cover (ar46.20-p-0200a)
│ ├── 46.20 – Retightening steering mounting bolts (ap46.20-p-4671ba)
│ ├── 46.25 – Service Information Approved oils for hydraulic steering systems (si46.25-p-0004a)
│ ├── 46.25 – Service Information Processing of steering system complaints (si46.25-p-0003a)
│ ├── 46.30 – 0002 – Overview power steering_tandem pump (ra4600fbl0002x)
│ ├── 46.30 – 0715 – Filling and bleeding the power steering pump_tandem pump Steering gear 765.9 (ra46097650715x)
│ ├── 46.30 – 0730 – Disassembly and assembly of the power steering pump_tandem pump A. Power steering pump, B. Tandem pump (Models 62, 162) Steering gear 765.9 (ra46a97650730x)
│ ├── 46.30 – 0730 – Disassembly and assembly of the tandem pump C. Models 67, 167 Steering gear 765.9 (ra46c97650730x)
│ ├── 46.30 – 4611 – Checking and correcting the power steering fluid level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4611pkw0000x)
│ ├── 46.30 – Checking oil pressure of power steering pump (ar46.30-p-0100a)
│ ├── 46.30 – Fill power steering pump and bleed (ar46.30-p-0010a)
│ ├── 46.30 – Remove_install power steering pump (ar46.30-p-0500a)
│ ├── 46.40 – Remove_install drag link (ar46.40-p-0100a)
│ ├── 46.40 – Remove_install steering idler arm, replacing plain rubber mount (ar46.40-p-0300a)
│ ├── 46.40 – Remove_install track rod (ar46.40-p-0200a)
│ └── 46.50 – 0231 – Removal and installation of the parameter steering (PML) P-valve (Y10) Models 124, 129, 140, 201, 202 with Steering gear 765.9 (ra46097650231x)
├── 47_Fuel System
│ ├── 47.00 – 000 588 03 21 00 Gas detector (ws47.00-p-0019b)
│ ├── 47.00 – 0005 – Function description Fuel cooler LH-Injection System (ra4700flh0005x)
│ ├── 47.00 – 0020 – Function description Fuel gauge sensor A. Model 124, B. Models 129, 140 LH-Injection System (ra4700flh0020x)
│ ├── 47.00 – 210 589 01 37 00 Pliers (ws47.00-p-0010b)
│ ├── 47.00 – Capacities Passenger cars Fuel system – – bf47.00-z-9999az)
│ ├── 47.00 – Forms Passenger cars Fuel system (of47.00-z-3999az)
│ ├── 47.00 – Service information Return delivery of fuel-guiding parts (si47.00-p-0001a)
│ ├── 47.00 – Service Information Usability of E10 fuel (si47.00-p-0002a)
│ ├── 47.00 – Technical modifications Passenger cars Fuel system (bt47.00-z-9999az)
│ ├── 47.00 – Test and adjustment values Passenger cars Fuel system (be47.00-z-9999az)
│ ├── 47.00 – Tightening torques Passenger cars Fuel system – – ba47.00-z-9999az)
│ ├── 47.10 – 0010 – Function description Fuel tank with splash bowl LH-Injection System (ra4700flh0010x)
│ ├── 47.10 – Checking the nozzle gasket in the tank filler neck for damage and replacing it (ap47.10-p-4751a)
│ ├── 47.10 – Draining and filling fuel tank (ar47.10-p-4001f)
│ ├── 47.10 – Remove_install fuel level sensor (ar47.10-p-7000fa)
│ ├── 47.10 – Remove_install fuel tank (ar47.10-p-4100d)
│ ├── 47.10 – Remove_install fuel tank (ar47.10-p-4100fa)
│ ├── 47.10 – Removing and installing guide funnel (ar47.10-p-7571d)
│ ├── 47.10 – Service information on fuel sensor (si47.10-p-0001a)
│ ├── 47.10 – Service Information Procedure for fuel tank leaks (si47.10-p-0007a)
│ ├── 47.20 – 0780 – Replacement of the fuel filter Engine 104, 119, 120 LH-injection Models 124, 129, 140 to 6_93 (wh0780pkw0005x)
│ ├── 47.20 – Model and components installation survey fuel pumps as-built configuration (gf47.20-p-0801a)
│ ├── 47.20 – Removing and installing check valve for fuel pump (ar47.20-p-5820f)
│ ├── 47.20 – Removing and installing fuel pumps (ar47.20-p-5713f)
│ ├── 47.20 – Replacing fuel filter (ap47.20-p-0780da)
│ ├── 47.30 – 0200 – Function description Fuel evaporation control system A. Function diagram, B. Function LH-Injection System (ra4700flh0200x)
│ ├── 47.30 – Removing and installing activated charcoal canister (ar47.30-p-8212d)
│ ├── 47.30 – Removing and installing activated charcoal canister (ar47.30-p-8212fa)
│ └── 47.30 – Removing and installing activated charcoal filter (ar47.30-p-8212b)
├── 49_Exhaust System
│ ├── 49.00 – 0010 – Function description Exhaust system A. Engine 104, B. Engine 119, C. Engine 120 LH-Injection System (ra4900flh0010x)
│ ├── 49.00 – 0025 – Function description General notes regarding vehicles with CAT. LH-Injection System (ra4900flh0025x)
│ ├── 49.00 – 4971 – Retightening the exhaust system screw connections Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4971pkw0000x)
│ ├── 49.00 – Certificates Passenger cars Exhaust system (of49.00-z-1999az)
│ ├── 49.00 – Technical modifications Passenger cars Exhaust system (bt49.00-z-9999az)
│ ├── 49.00 – Tightening torques Passenger cars Exhaust system – – ba49.00-z-9999az)
│ ├── 49.10 – 0005 – Function description Catalytic converter LH-Injection System (ra4900flh0005x)
│ ├── 49.10 – 49.05 – AMG Accessories Replacement of rear muffler Model 129 (ea4905pez0000x)
│ ├── 49.10 – Instructions for treatment of exhaust pipes, catalytic converters, mufflers as toxic waste (os49.10-n-1000a)
│ ├── 49.10 – Remove_install catalytic converter and front exhaust system (ar49.10-p-5531e)
│ ├── 49.10 – Remove_install exhaust system complete (ar49.10-p-7000e)
│ ├── 49.10 – Remove _ install exhaust system from flange connection (ar49.10-p-7280fa)
│ ├── 49.10 – Replacing center and rear muffler (ar49.10-p-4940f)
│ ├── 49.10 – Service Information Care of tail pipe finishers (si49.10-p-0008a)
│ └── 49.10 – Service Information Recycling of diesel particulate filters (si49.10-p-0007a)
├── 54_Electrical System, Equipment & Instruments
│ ├── 54.00 – 000 586 00 99 00 Battery diagnostic unit (ws54.00-p-0033c)
│ ├── 54.00 – 000 588 00 19 00 Insulation measuring unit (ws54.00-p-0046b)
│ ├── 54.00 – 000 588 00 81 00 Charger (ws54.00-p-0037b)
│ ├── 54.00 – 000 588 00 84 00 Heat gun (ws54.00-p-0049b)
│ ├── 54.00 – 000 588 02 19 00 Battery tester (ws54.00-n-3006b)
│ ├── 54.00 – 000 588 02 81 00 Jump-starting device (ws54.00-p-0041b)
│ ├── 54.00 – 000 588 03 81 00 Jumper cables (ws54.00-p-0039b)
│ ├── 54.00 – 000 588 06 19 00 Measuring instrument (ws54.00-p-0043b)
│ ├── 54.00 – 000 588 16 98 00 Support (ws54.00-p-0047b)
│ ├── 54.00 – 000 589 30 37 00 Wire stripper (ws54.00-p-0025b)
│ ├── 54.00 – 000 589 88 63 00 Removal assembly (ws54.00-p-0067b)
│ ├── 54.00 – 124 589 00 21 00 35 Pin socket box (ws54.00-n-0002b)
│ ├── 54.00 – 124 589 19 21 00 Pulse counter (ws54.00-p-0004b)
│ ├── 54.00 – 129 589 00 09 00 Pin socket (ws54.00-n-0007b)
│ ├── 54.00 – 129 589 00 21 00 126-pin socket box (ws54.00-p-0008b)
│ ├── 54.00 – 129 589 01 09 00 Pin socket (ws54.00-p-0040b)
│ ├── 54.00 – 140 589 01 33 00 Mounting lever (ws54.00-p-0009a)
│ ├── 54.00 – 140 589 01 63 00 Contacting module 1 (ws54.00-p-0010b)
│ ├── 54.00 – 140 589 02 33 00 Pulling hook (ws54.00-p-0011b)
│ ├── 54.00 – 140 589 06 63 00 Contacting box (ws54.00-p-0013b)
│ ├── 54.00 – 140 589 10 33 00 Spacer (ws54.00-p-0014b)
│ ├── 54.00 – 140 589 12 21 00 Baseline current draw test adapter 1 (ws54.00-p-0015b)
│ ├── 54.00 – 140 589 13 21 00 Quiescent current test adapter 2 (ws54.00-p-0016b)
│ ├── 54.00 – 140 589 14 63 00 Adapter (ws54.00-p-0017b)
│ ├── 54.00 – 210 589 02 33 00 Unlocking tool for SPT _ JPT contacts (ws54.00-p-0042b)
│ ├── 54.00 – 220 589 00 99 00 Electrical connection kit (ws54.00-p-0050b)
│ ├── 54.00 – 5451 – Function check signal system, indicator lamps, symbol lights and interior lighting Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh5451pkw0000x)
│ ├── 54.00 – CAN data bus, contents, function description (gf54.00-p-0999zz)
│ ├── 54.00 – Forms Passenger cars Electrical system, equipment and instruments – – of54.00-z-3999az)
│ ├── 54.00 – Technical modifications Passenger cars Electrical system, equipment and instruments (bt54.00-z-9999az)
│ ├── 54.00 – Test and adjustment values Passenger cars Electrical system, equipment and instruments (be54.00-z-9999az)
│ ├── 54.00 – Tightening torques Passenger cars Electrical system, equipment and instruments – – ba54.00-z-9999az)
│ ├── 54.10 – 54.01 – Installation instructions Battery charge retention unit Model 129 (ea5401pez1000x)
│ ├── 54.10 – Batteries – checking and correcting fluid level (ap54.10-p-5410a)
│ ├── 54.10 – Charge battery (ar54.10-p-1130z)
│ ├── 54.10 – Check condition of battery (ar54.10-p-1129z)
│ ├── 54.10 – Check quiescent current consumption (ar54.10-p-1030ab)
│ ├── 54.10 – Disconnect_connect battery’s ground cable (ar54.10-p-0003a)
│ ├── 54.10 – Disposal of toxic waste, battery (os54.10-p-1000zz)
│ ├── 54.10 – Initial filling of battery (ar54.10-p-0001z)
│ ├── 54.10 – Removing and installing battery (ar54.10-p-0005ea)
│ ├── 54.10 – Service Information Battery tester (si54.10-z-0023a)
│ ├── 54.10 – Service Information Charge battery (si54.10-p-0018a)
│ ├── 54.10 – Service Information New test method for batteries (si54.10-p-0003a)
│ ├── 54.10 – Service Information Wet battery handling (si54.10-p-0006a)
│ ├── 54.10 – Treatment of battery if vehicle taken out of service (ar54.10-p-0006ea)
│ ├── 54.15 – Removing and installing daytime running lamp relay (ar54.15-p-9998cs)
│ ├── 54.15 – Removing and installing fuse and relay box (ar54.15-p-1255cs)
│ ├── 54.15 – Removing and installing fuse and relay box (ar54.15-p-1255ct)
│ ├── 54.15 – Removing and installing relays and control modules (ar54.15-p-1300cs)
│ ├── 54.18 – 54.03 – Installation instructions Terminal blocks Models 129, 140 (ea5403pb4es00x)
│ ├── 54.18 – Checking wiring harness for special equipment block (sm54.18-p-0003a)
│ ├── 54.18 – Repair squib wiring harness for Supplemental Restraint System (SRS) (ar54.18-p-0600a)
│ ├── 54.18 – Service Information bulletin Retrofit marten repeller on electrical lines (si54.18-p-0007a)
│ ├── 54.18 – Service Information Damage code for electrical components (si54.18-z-0012a)
│ ├── 54.18 – Service Information on wiring harness complaints (si54.18-p-0001a)
│ ├── 54.20 – Removing and installing blower motor for control module box (ar54.20-p-2351cs)
│ ├── 54.20 – Removing and installing blower motor for module box (ar54.20-p-2350cs)
│ ├── 54.20 – Removing and installing control module box (ar54.20-p-1257cs)
│ ├── 54.20 – Removing, installing module box (ar54.20-p-2360cs)
│ ├── 54.21 – 1.1 – Base module (BM) 11 – Diagnosis – Fault memory Model 124.034_036, 129.067_076, 140 – M 104,119,120 LB_ME (dh0101pf00011x)
│ ├── 54.21 – 1.1 – Base module (BM) 21 – Test program – Electrics, Location of components Model 124.034_036, 129.067_076, 140 – M 104,119,120 LB_ME (dh0101pf00021x)
│ ├── 54.21 – 1.1 – Base module (BM) 22 – Test program – Electrics Conditions for testing Model 124.034_036, 129.067_076, 140 – M 104,119,120 LB_ME (dh0101pf00022x)
│ ├── 54.21 – 1.1 – Base module (BM) 23 – Test program – Electrics, Testing Model 124.034_036, 129.067_076, 140 – M 104,119,120 LB_ME (dh0101pf00023x)
│ ├── 54.21 – Programming of control units (ar54.21-p-0014y)
│ ├── 54.21 – Programming of control units (ar54.21-p-0014z)
│ ├── 54.21 – SCAN coding of control units (ar54.21-p-0015x)
│ ├── 54.21 – Service Information Malfunctions due to other-make installations (si54.21-p-0007a)
│ ├── 54.21 – Service Information Programming of control units (si54.21-p-0008a)
│ ├── 54.21 – Service Information Reimbursement of additional work in event of programming abort (si54.21-p-0039a)
│ ├── 54.25 – Removing and installing combination switch (ar54.25-p-2800cs)
│ ├── 54.25 – Removing and installing switch in center console (ar54.25-p-3190cs)
│ ├── 54.25 – Service Information bulletin Clutch pedal start enable switch (S40_5) (si54.25-p-0006a)
│ ├── 54.30 – 1.1 – Instrument cluster (KI) 11 – Diagnosis – Function check Model 129 (dh0101pi10011x)
│ ├── 54.30 – 1.1 – Instrument cluster (KI) 12 – Diagnosis – Troubleshooting chart Model 129 (dh0101pi10012x)
│ ├── 54.30 – 1.1 – Instrument cluster (KI) 21 – Test program – Electrical system – Location of components Model 129 (dh0101pi10021x)
│ ├── 54.30 – 1.1 – Instrument cluster (KI) 22 – Test program – Electrical system – Pre-requisites for testing Model 129 (dh0101pi10022x)
│ ├── 54.30 – 1.1 – Instrument cluster (KI) 23 – Test program – Electrical system – Test Model 129 (dh0101pi10023x)
│ ├── 54.30 – 1.2 – Instrument cluster (KI) 11 – Diagnosis – Function check Model 129 (USA) (dh0102pi10011x)
│ ├── 54.30 – 1.2 – Instrument cluster (KI) 12 – Diagnosis – Troubleshooting chart Model 129 (USA) (dh0102pi10012x)
│ ├── 54.30 – 1.2 – Instrument cluster (KI) 21 – Test program – Electrical system – Location of components Model 129 (USA) (dh0102pi10021x)
│ ├── 54.30 – 1.2 – Instrument cluster (KI) 22 – Test program – Electrical system – Prerequisites for testing Model 129 (USA) (dh0102pi10022x)
│ ├── 54.30 – 1.2 – Instrument cluster (KI) 23 – Test program – Electrical system – Test Model 129 (USA) (dh0102pi10023x)
│ ├── 54.30 – 1.7 – Instrument cluster (IC) 10 – Diagnosis – Modification notes Model 129 (dh0107pi00010x)
│ ├── 54.30 – 1.7 – Instrument cluster (IC) with digital odometer 11 – Diagnosis – Function check Model 129 up to 05_96 (dh0107pi00011x)
│ ├── 54.30 – 1.7 – Instrument cluster (IC) with digital odometer 21 – Test program – Electrical system – Location of components Model 129 up to 05_96 (dh0107pi00021x)
│ ├── 54.30 – 1.7 – Instrument cluster (IC) with digital odometer 22 – Test program – Electrical system – Prerequisites for testing Model 129 up to 05_96 (dh0107pi00022x)
│ ├── 54.30 – 1.7 – Instrument cluster (IC) with digital odometer 23 – Test program – Electrical system – Testing Model 129 up to 08_95 (dh0107pi00023x)
│ ├── 54.30 – 1.7 – Instrument cluster (IC) with digital odometer display 12 – Diagnosis – Troubleshooting chart Model 129 up to 05_96 (dh0107pi00012x)
│ ├── 54.30 – 1.7 – Instrument cluster (IC) with digital odometer display 24 – Test program – Electrical system – Testing Model 129 from 09_95 up to 05_96 (dh0107pi00024x)
│ ├── 54.30 – 1.8 – Instrument cluster (IC) 10 – Diagnosis – Modification notes Model 129 USA (dh0108pi00010x)
│ ├── 54.30 – 1.8 – Instrument cluster (IC) with digital odometer 11 – Diagnosis – Function check Model 129 USA up to 05_96 (dh0108pi00011x)
│ ├── 54.30 – 1.8 – Instrument cluster (IC) with digital odometer 12 – Diagnosis – Troubleshooting chart Model 129 USA up to 05_96 (dh0108pi00012x)
│ ├── 54.30 – 1.8 – Instrument cluster (IC) with digital odometer 21 – Test program – Electrical system – Location of components Model 129 USA up to 05_96 (dh0108pi00021x)
│ ├── 54.30 – 1.8 – Instrument cluster (IC) with digital odometer 22 – Test program – Electrical system – Prerequisites for testing Model 129 USA up to 05_96 (dh0108pi00022x)
│ ├── 54.30 – 1.8 – Instrument cluster (IC) with digital odometer 23 – Test program – Electrical system – Testing Model 129 USA up to 08_95 (dh0108pi00023x)
│ ├── 54.30 – 1.8 – instrument cluster (IC) with digital odometer display 24 – Test program – Electrical system – Testing Model 129 USA from 09_95 up to 05_96 (dh0108pi00024x)
│ ├── 54.30 – 54.01 – Installation instructions Two tone horn_fanfare horn Model 129 with left-hand steering (ea5401pb4es00x)
│ ├── 54.30 – Checking exterior lamp failure indicator (ar54.30-p-6070cs)
│ ├── 54.30 – Contents, function description, instrument cluster (IC) (gf54.30-p-0997az)
│ ├── 54.30 – Instrument cluster (IC) diagnosis, contents (ad54.30-p-1000az)
│ ├── 54.30 – Instrument cluster (IC) diagnosis contents (ad54.30-p-1000ez)
│ ├── 54.30 – Removing and installing bulbs in instrument cluster (ar54.30-p-6049cs)
│ ├── 54.30 – Removing and installing display instruments in instrument cluster (ar54.30-p-6111cs)
│ ├── 54.30 – Removing and installing electronic plate (ar54.30-p-6040cs)
│ ├── 54.30 – Removing and installing instrument cluster (ar54.30-p-6015ea)
│ ├── 54.30 – Removing and installing instrument cluster housing (ar54.30-p-6031cs)
│ ├── 54.30 – Removing and installing outside temperature sensor (ar54.30-p-6341cs)
│ ├── 54.30 – Removing and installing outside temperature sensor (ar54.30-p-6341ct)
│ ├── 54.30 – Service information on reading and parameterizing instrument cluster (si54.30-p-0002a)
│ ├── 54.50 – 0415 – Function of the trip computer A. Models 107, 124, 126, B. Models 129, 140 (ra54001070415x)
│ ├── 54.50 – 0418 – Information for troubleshooting A. Models 107, 124, 126, B. Models 129, 140 (ra54001070418x)
│ ├── 54.50 – 0420 – Checking the function of the trip computer A. Models 107, 124, 126, B. Models 129, 140 (ra54001070420x)
│ ├── 54.50 – 0424 – Adapting the fuel consumption display A. Models 107, 124, 126, B. Models 129, 140 (ra54001070424x)
│ ├── 54.50 – 0430 – Removal and installation of the trip computer keyboard Models 124, 126, 129, 140 (ra54001070430x)
│ ├── 54.50 – 0433 – Removal and installation of the trip computer control unit with display A. Model 129, B. Model 140 (ra54001070433x)
│ ├── 54.50 – 2.1 – Trip information computer (RRE) 11 – Diagnosis – Function check Model 129 (dh0201pi10011x)
│ ├── 54.50 – 2.1 – Trip information computer (RRE) 12 – Diagnosis – Troubleshooting chart Model 129 (dh0201pi10012x)
│ ├── 54.50 – 2.1 – Trip information computer (RRE) 21 – Test program – Electrical system – Location of components Model 129 (dh0201pi10021x)
│ ├── 54.50 – 2.1 – Trip information computer (RRE) 22 – Test program – Electrical system – Pre-requisites for testing Model 129 (dh0201pi10022x)
│ ├── 54.50 – 2.1 – Trip information computer (RRE) 23 – Test program – Electrical system – Testing Model 129 (dh0201pi10023x)
│ ├── 54.50 – Service Information Reset trip computer following engine control unit software update (si54.50-p-0002a)
│ ├── 54.50 – Technical modifications Trip computer Models 124, 126, 129, 140, 201 (ra5400107ta00x)
│ └── 54.65 – Service Information Warranty and goodwill settlement for Parktronic sensors (si54.65-p-0002a)
├── 58_Tools
│ ├── 58.00 – Forms Passenger cars Tools (of58.00-z-3999az)
│ ├── 58.20 – Service information for special tools (si58.20-p-0002b)
│ ├── 58.20 – Service Information Modify chain separating tool and rivet press tool (si58.20-d-0001sf)
│ ├── 58.20 – Service information New special tool (si58.20-p-0005a)
│ ├── 58.20 – Special tools in EPC (si58.20-p-0019a)
│ ├── 58.30 – Service information New commercially available tool (si58.30-p-0002b)
│ ├── 58.40 – Fault report for HHT, MUX, PM, Case (wb0000algfm00z)
│ ├── 58.40 – Service Information bulletin Ease of access to the User Help Desk (si58.40-z-0030a)
│ ├── 58.40 – Service Information bulletin Procedure when processing imports of system and component returns of the Star Diagnosis system (si58.40-z-0035a)
│ ├── 58.40 – Service Information Diagnosis Assistance System (DAS) (si58.40-p-0005a)
│ ├── 58.40 – Service Information Identification of add-ons installed on XENTRY Connect (si58.40-z-0019a)
│ ├── 58.40 – Service information Introduction of electronic stethoscope for noise diagnosis (si58.40-p-0036a)
│ ├── 58.40 – Service Information Modified display when doing quick tests in STAR DIAGNOSIS (si58.40-p-0010a)
│ ├── 58.40 – Service Information Multiplexer (si58.40-z-0041a)
│ ├── 58.40 – Service Information No WLAN connection between XENTRY Connect and XENTRY Tab after Update 09_2014 (si58.40-z-0025a)
│ ├── 58.40 – Service information Procedure for messages on the screen for proxy entries as per Star Diagnosis update 10_2007 (si58.40-z-0028a)
│ ├── 58.40 – Service Information Procedure for returning Star Diagnosis compact (si58.40-z-0018a)
│ ├── 58.40 – Service information Repairs to STAR Diagnosis cable (si58.40-p-0006a)
│ ├── 58.40 – Service Information Run time limit for Star Diagnosis software (si58.40-z-0014a)
│ ├── 58.40 – Service Information Software update for tester MB3000 – – si58.40-p-0044a)
│ ├── 58.40 – Service Information STAR DIAGNOSIS (si58.40-p-0007b)
│ ├── 58.40 – Service information Test instrument for radio transmitter (si58.40-p-0004a)
│ ├── 58.40 – Service Information Test interval for Midtronics battery tester (si58.40-z-0002a)
│ ├── 58.40 – Service Information Upgrade campaign for MIDTRONICS Micro717 battery tester (si58.40-z-0024a)
│ ├── 58.40 – Service Information Workshop equipment in EPC_WIS_ASRA (si58.40-z-0045a)
│ └── 58.50 – Shop-made tools Passenger cars (wf58.50-z-0998az)
├── 60_Body – General
│ ├── 60.00 – 000 588 01 23 00 Body straightening system (ws60.00-p-0023k)
│ ├── 60.00 – 000 588 01 84 00 Welder (ws60.00-p-0021k)
│ ├── 60.00 – 000 588 02 39 00 Rivet press tool (ws60.00-p-0010b)
│ ├── 60.00 – 000 588 02 84 00 Welder (ws60.00-p-0022k)
│ ├── 60.00 – 000 589 86 63 00 Adapter (ws60.00-p-0085k)
│ ├── 60.00 – 0070 – Clearances on the hood, doors and lid Model 129 (ra60001290070x)
│ ├── 60.00 – 0200 – Safety measures prior to arc welding Model 129 (ra60001290200x)
│ ├── 60.00 – 108 589 00 76 00 Set of planishing tools (ws60.00-p-0002k)
│ ├── 60.00 – 110 589 11 63 00 Angular scraper (ws60.00-p-0003k)
│ ├── 60.00 – 115 589 28 63 00 Smoothing block (ws60.00-p-0
…
INSTANT DOWNLOAD
