Month: February 2019

INSTANT DOWNLOAD (add to cart)

Complete Parts Catalog for John Deere 160LC Excavator. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This John Deere 160LC Excavator Parts Catalog Manual is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

John Deere 160LC Excavator Parts Catalog.pdf
689 pages, Searchable, Bookmarked

INSTANT DOWNLOAD (add to cart)

Complete Technical Repair Manual with electrical wiring diagrams for John Deere 135G Excavator. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This John Deere 135G Excavator Technical Repair Manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MANUAL LIST:
TM12669 – John Deere 135G Excavator Technical Repair Manual.pdf

EXCERPT:
11. Repair or replace parts as necessary.
12. IMPORTANT:
Prevent possible muffler filter damage. Gasket (20) is not reusable and must be replaced.
Install new gasket (20) and DPF (19).
13. Install mounting brackets (18), cap screws (17), and nuts (16).
14. Install bracket (15), cap screws (13), and nuts (14).
15. Tighten nuts (14 and 16) to specification.
16. IMPORTANT:
Prevent possible exhaust filter damage. Gasket (11) is not reusable and must be replaced.
Install new gasket (11) and muffler (10).
17. Install cap screws (8) and nuts (9).
18. Install mounting brackets (7), cap screws (6), and nuts (5).
19. Install bracket (4), cap screws (3), and nuts (2).
20. Tighten nuts (2, 5, and 9) to specification.
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for John Deere 135G Excavator. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This John Deere 135G Excavator service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

TM12666 – John Deere 135G Excavator Operation & Test Technical Manual.pdf
CONTENTS
Foreword
9000 – General Safety
9001 – Diagnostics
9005 – Operational Checkout
9010 – Engine
9015 – Electrical System
9020 – Power Train
9025 – Hydraulic System
9031 – Heating and Air Conditioning
9900 – Dealer Fabricated Tools

EXCERPT:
Track Adjuster and Recoil Spring Operation
TX1031305-UN: Track Adjuster and Recoil Spring
LEGEND:
1 – Grease Fitting
2 – Valve
3 – Grease Relief Passage
4 – Cylinder
5 – Yoke
6 – Front Idler
7 – Piston
8 – Recoil Spring
9 – Grease
The track adjuster and recoil spring is supported by the track frame. Shock loads on the track and front idler (6) are absorbed by the recoil spring (8).
To decrease track sag, grease (9) is pumped into the cylinder (4) through the grease fitting (1). The grease pushes the piston (7) against the yoke (5) moving the front idler (6) out, reducing track sag. The grease fitting (1) is protected from excess pressure by a check ball.
CAUTION:
…

INSTANT DOWNLOAD (add to cart)

Complete Repair Technical Manual for John Deere 85G Excavator. It’s the same manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This John Deere 85G Excavator Repair Technical Manual is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MANUAL LIST:
TM12870 – 85G Excavator Repair Manual.pdf
(bookmarked, Searchable, Printable, high quality PDF)

TABLE OF CONTENTS
00 – General Information
01 – Tracks
02 – Axles and Suspension Systems
04 – Engine
05 – Engine Auxiliary Systems
07 – Dampener Drive
17 – Frames, Chassis, or Supporting Structure
18 – Operator’s Station
32 – Blader (Backfill)
33 – Excavator
43 – Swing or Pivoting System
99 – Dealer Fabricated Tools

EXCERPTS:
10. Install cap screws (6) and nuts (7).
11. Connect electrical sensors (B48—B50). See Engine Harness (W4) Component Location . (Group 9015-10.)
12. Install exhaust pipe and nut (5).
13. Install heat shield and cap screws (3).
…

INSTANT DOWNLOAD (add to cart)

Complete Operator’s Manual for John Deere 75G Excavator Excavator. It’s the same manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This John Deere 75G Excavator Operator’s Manual is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MANUAL LIST:
OMT337609 – 75G Excavator Operator’s Manual.pdf (403 pages, bookmarked, Searchable, Printable, high quality PDF)

CONTENTS
1-1 – Safety-Safety and Operator Convenience
1-2 – Safety-General Precautions
1-3 – Safety-Operating Precautions
1-4 – Safety-Maintenance Precautions
1-5 – Safety-Safety Signs
2-1 – Operation-Operator’s Station
2-2 – Operation-Operating the Machine
2-3 – Operation-Monitor Operation
3-1 – Maintenance-Machine
3-2 – Maintenance-Periodic Maintenance
3-3 – Maintenance-As Required
3-4 – Maintenance-Every 10 Hours or Daily
3-5 – Maintenance-Initial Service – 50 Hours
3-6 – Maintenance-Every 100 Hours
3-7 – Maintenance-Every 250 Hours
3-8 – Maintenance-Every 500 Hours
3-9 – Maintenance-Every 1000 Hours
3-10 – Maintenance-Every 2000 Hours
3-11 – Maintenance-Every 3000 Hours
3-12 – Maintenance-Every 4000 Hours
3-13 – Maintenance-Every 5000 Hours
4-1 – Miscellaneous-Machine
4-2 – Miscellaneous-Operational Checkout
4-3 – Miscellaneous-Troubleshooting
4-4 – Miscellaneous-Storage
4-5 – Miscellaneous-Machine Numbers
4-6 – Miscellaneous-Specifications
…