Day: April 29, 2019

INSTANT DOWNLOAD (add to cart)

NOTES: Manual for Micra K13 series is in Spanish only
Complete workshop & service manual with electrical wiring diagrams for Nissan Micra (K10/K12K/13). It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

Nissan Micra (K10/K12K/13) service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

10,000+ pages, bookmarked, Searchable, Printable, high quality PDF
’02-’04 Micra (K12) (EN)
’02-’06 Micra (K12) (EN)
’02-’07 Micra (K12) (EN)
’11 Micra (K13) (ES)
’83-’93 Micra (K10) (EN).pdf
’87 Micra (K10) (EN).pdf

EXCERPT:
DRIVE BELTS
Checking Drive Belts
WARNING:
Be sure to perform when the engine is stopped.
1. Inspect belts for cracks, fraying, wear and oil. If necessary, replace.
2. Tighten auto-tensioner lock nut (models with A/C compressor) or idler pulley lock nut (models without A/C compressor) by hand and measure deflection or tension without looseness.
3. When measuring deflection, apply 98 N (10 kg, 22 lb) at the marked point as shown (models without A/C compressor).
Tension Adjustment
MODELS WITH A/C COMPRESSOR
Belt tensioning is not necessary, as it is automatically adjusted by auto-tensioner.
MODELS WITHOUT A/C COMPRESSOR
Tighten the accessories belt using tool (Mot. 1638) by tightening the nut (both tension wheel mounting bolts are loosened).
Check the belt tension using tools (Mot. 1715) and (Mot. 1505)
…

INSTANT DOWNLOAD (add to cart)

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1994-2016 Nissan Maxima (A32/A33/A34/A35/J30 Series). Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 1994-2016 Nissan Maxima (A32/A33/A34/A35/J30 Series) is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
COMPONENT PARTS – < SYSTEM DESCRIPTION >
Main Power Window and Door Lock/Unlock Switch
• Main power window and door lock/unlock switch controls all power windows.
• Main power window and door lock/unlock switch integrates UP/DOWN switch, power window lock switch, and door lock/unlock switch.
• Main power window and door lock/unlock switch controls power window lock function and AUTO UP/DOWN function.
• Receives encoder pulse signal and then controls anti-pinch system.

Power Window and Door Lock/Unlock Switch RH
• Power window and door lock/unlock switch RH transmits AUTO UP/DOWN signal to front power window motor RH.
• Receives AUTO UP/DOWN signal from BCM and then transmits to front power window motor RH.
• Receives encoder pulse signal and then controls anti-pinch system. Rear Power Window

Switch
• Each power window switch transmits UP/DOWN signal to each motor.
• Each power window switch transmits UP/DOWN signal from main power window and door lock/unlock switch to each motor.

Power Window Motor
• Integrates the encoder for front power windows.
• Starts operation according to signals from each power window switch.
• Transmits each power window motor rotation as a pulse signal to each power window switch.

POWER WINDOW OPERATION
• Power window system is activated by the power window switches when the ignition switch is in the ON position or during the retained power operation after ignition switch turns OFF.
• Main power window and door lock/unlock switch can open/close door glass.
• Front and rear power window switches can open/close the corresponding door glass.
• Power window lock switch can lock all power windows other than driver front.
• Front power windows open when pressing Intelligent Key unlock button for 3 seconds.
• If door glass receives resistance that is more than the specified value and the power window is in the AUTOUP operation, power window will move in the reverse direction (anti-pinch function).
POWER WINDOW AUTO-OPERATION
• AUTO-UP/DOWN operation can be performed when each power window motor turns to AUTO.
• Encoder continues detecting the movement of power window motor and outputs the encoder pulse signal to power window switch while power window motor is operating.
• Power window switch reads the changes of encoder signal and stops AUTO operation when door glass is at fully open/closed position.
• Power window motor is operable in case encoder is malfunctioning.
• AUTO function does not operate if encoder is malfunctioning.
…

INSTANT DOWNLOAD (add to cart)

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Nissan Leaf (ZE0) 2011-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Nissan Leaf (ZE0) 2011-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
BODY INTERIOR
INSTRUMENT PANEL ASSEMBLY
< REMOVAL AND INSTALLATION >
REMOVAL
I. Remove instrument lower center cover.
1. Apply protective tape (A) to console finisher assembly to protect from the damage.
2. Apply protective tape (A) around the part to protect from
damage.
3. Insert suitable tool (A) between instrument lower center cover and center console assembly to disengage the metal clips as shown.
4. Lift up instrument lower center cover, then disconnect harness connectors.
CAUTION: Be careful not to scratch console finisher assembly with pawl or metal clip of instrument lower center cover.
II. Remove instrument lower cover LH.
1. Remove clip (A).
2. Pull the instrument lower cover LH crosswise, and disengage the pawls.
CAUTION: Release pawls slowly so that they are not damaged.
III. Remove instrument lower cover RH.
1. Remove clip (A).
2. Pull the instrument lower cover RH crosswise, and disengage the pawls.
CAUTION: Release pawls slowly so that they are not damaged.
IV. Release front pillar portion of front body side welt LH. Refer to INT-29, “BODY SIDE WELT : Removal and Installation”.
V. Remove front pillar garnish LH. Refer to INT-26, “FRONT PILLAR GARNISH : Removal and Installation”.
VI. Remove instrument mask LH.
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Nissan Juke (F15 Series) 2011-2016. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

Nissan Juke (F15 Series) 2011-2016 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

10,000+ pages, bookmarked, Searchable, Printable, high quality PDF

EXCERPT:
AWD : Removal and Installation
REMOVAL
Left Side
Remove tires with power tool. Refer to WT-39, “Removal and Installation”.
Remove wheel sensor and sensor harness. Refer to BRC-147, “FRONT WHEEL SENSOR : Exploded View”.
Remove lock plate from strut assembly. Refer to BR-25, “FRONT : Removal and Installation”.
Remove caliper assembly. Hang caliper assembly not to interfere with work. Refer to BR-55, “BRAKE CALIPER ASSEMBLY : Removal and Installation”.
CAUTION:
Never depress brake pedal while brake caliper is removed.
Remove disc rotor.
CAUTION:
• Put matching marks (A) on the wheel hub assembly and the disc rotor before removing the disc rotor.
• Never drop disc rotor.
Remove cotter pin, and adjusting cap, and then loosen wheel hub lock nut with power tool.
Patch wheel hub lock nut with a piece of wood. Hammer the wood to disengage wheel hub assembly from drive shaft.
NOTE:
Use suitable puller, if wheel hub assembly and drive shaft cannot be separated even after performing the above procedure.
8. Remove wheel hub lock nut.
9. Remove strut assembly from steering knuckle. Refer to FSU-9, “Removal and Installation”.
10. Remove draive shaft from wheel hub assembly.
CAUTION:
• Never place drive shaft joint at an extreme angle. Also be careful not to overextend slide joint.
• Never allow drive shaft to hang down without support for joint sub-assembly, shaft and the other parts.
11. Use the drive shaft attachment (A) [SST:KV40107500 ( — )] and a sliding hammer (B) (commercial service tool) while inserting tip of the drive shaft attachment between shaft and transaxle assembly, and then remove drive shaft from transaxle assembly.
CAUTION:
• Never place drive shaft joint at an extreme angle when removing drive shaft. Also be careful not to overextend slide joint.
• Confirm that the circular clip is attached to the drive shaft.

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Mitsubishi Space Star 1999-2003.2013-2016. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Mitsubishi Space Star 1999-2003.2013-2016 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
REMOVAL SERVICE POINTS
A POWER STEERING OIL PUMP REMOVAL
Remove the power steering oil pump from the engine with the hose attached.
NOTE
Place the removed power steering oil pump where it will not be a hindrance when removing and installing the engine assembly, and tie it with a cord.
A/C COMPRESSOR REMOVAL
Disconnect the A/C compressor connector and remove the compressor from the compressor bracket with the hose still attached.
NOTE
Place the removed A/C compressor where it will not be a hindrance when removing and installing the engine assembly, and tie it with a cord.
…