Day: April 30, 2019

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Mazda Millenia 1993-2002. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

Mazda Millenia 1993-2002 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

1,252 + 134 pages, bookmarked, Searchable, Printable, high quality PDF

MAKE: Mazda
MODEL: Millenia (aka Xedos 9)
YEAR: 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002

EXCERPT:
ENGINES 2.5L (KL) V6 – Mechanical – Millenia
10. Check the fuel line residual pressure.
If the pressure is lower than specification, go to the next step.
11. Turn the ignition key to ON for approx. 10s.
12. Check whether the fuel line pressure holds when the ignition switch is turned to OFF after clipping the fuel return hose as shown in the figure.
If the fuel line pressure holds, replace the pressure regulator.
If the fuel line pressure does not hold, inspect the fuel pump hold pressure. (See FUEL PUMP HOLD PRESSURE INSPECTION .)
If the fuel pump hold pressure is normal, inspect for fuel leakage from the fuel line and the fuel injector.
Specification More than 150 kPa {1.5 kgf/cm 2 , 21 psi}
…

INSTANT DOWNLOAD (add to cart)

TM10130 – John Deere 310J Backhoe Loader Operation & Test Manual (p261-p261)

965 pages, bookmarked, Searchable, Printable, high quality PDF

Complete Technical manual for John Deere 310J Backhoe Loader. It’s the same manual used by dealers that guaranteed to be fully functional and intact without any missing page. This service manual divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

TM10130 – John Deere 310J Backhoe Loader Operation & Test Manual
TABLE OF CONTENTS
Foreword
9000 – General Information
9001 – Diagnostic Trouble Codes (DTC)
9005 – Operational Checkout Procedure
9010 – Engine
9015 – Electrical System
9020 – Power Train
9025 – Hydraulic System
9031 – Heating and Air Conditioning

EXCERPT:
This procedure is recommended for obtaining oil samples using the John Deere sampling valve. A cap probe, plastic bag, and oil sampling kit for the appropriate system are needed for this
procedure. Part numbers for the required items can be found at the end of this procedure.
Sample fluid systems at the following intervals:
Each system at every oil change before changing oil
Engine oil: 250 hours
Engine coolant: 500 hours
Hydraulic oil: 500 hours
Transmission oil: 500 hours
Power train oil (axles, gear cases): 500 hours
Machine Preparation
1. Start the machine and warm system to normal operating temperature. Operate machine functions so that the fluid is agitated throughout the system.
2. Once the system has reached operating temperature, operate engine at slow idle.
…

INSTANT DOWNLOAD (add to cart)

1.3 GB, 4,900+ pages, bookmarked, Searchable, Printable, high quality PDF
MAKE: MAZDA
MODEL: BT-50, CX-5, CX-7, CX-9, Mazda2, Mazda3, Mazda6, MX-5, RX-8, Tribute
FORMAT: PDF
CONTENT: Official Electrical Wiring Diagrams in PDF format

Complete workshop electrical wiring diagrams for Mazda BT-50, CX-5, CX-7, CX-9, Mazda2, Mazda3, Mazda6, MX-5, RX-8, Tribute. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

The EWD are divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

INSTANT DOWNLOAD (add to cart)

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 2007-2015 Mazda CX-9, CX-9 Grand Touring, CX-9 Sport, CX-9 Touring. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 2007-2015 Mazda CX-9, CX-9 Grand Touring, CX-9 Sport, CX-9 Touring is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2014 ENGINE Cooling System [MZI-3.7] – CX-9
Engine coolant capacity (approx. quantity) Single fan control module: 12.9 L {13.6 US qt, 11.4 Imp qt}
Dual fan control module: 13.3 L {14.1 US qt, 11.7 Imp qt}
1. Remove the cooling system cap.
2. Remove the radiator drain plug and drain the engine coolant into a container.
3. Flush the cooling system with water until all traces of color are gone.
4. Let the system drain completely.
5. Tighten the radiator drain plug.
Tightening torque 1.5-2.4 N.m {15-25 kgf.cm, 13-21 in.lbf}
6. Referring to the following chart, select the correct volume percentage of the water and engine coolant.
7. Refill the engine coolant into the coolant reserve tank up to the F mark on the tank.
8. Install the cooling system cap.
9. Start the engine and warm up the engine by idling.
10. After the engine warms up, perform the following steps. At this time, be careful of the engine coolant temperature to prevent overheating.
1. Run the engine at approx. 4,000 RPM for 1 min.
2. Run the engine at idle for 1 min.
3. Repeat steps (1), (2) approx. 2 times.
4. Operate the heater at the maximum temperature and airflow, and verify that hot air blows from vent.
11. Stop the engine, and inspect the engine coolant level after the engine coolant temperature decreases. If it is low, repeat steps 7-10.
12. Inspect for engine coolant leakage. (See ENGINE COOLANT LEAKAGE INSPECTION [MZI-3.7].)
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Mazda CX-7 2006-2012. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

Mazda CX-7 2006-2012 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

1,500+ pages, bookmarked, Searchable, Printable, high quality PDF

“CX-7”
CX-7 ER103100100001- Technical Information
Wiring Diagram | Workshop Manual | Engine | Transmission | Body Shop Manual | Troubleshooting | Technical Data
Applicable models : CX-7 ER103100100001-
Australian specs.
JM0 ER103100 100001—
European (L.H.D. U.K.) specs.
JMZ ER89360# 100001—
JMZ ER89380# 100001—

“2007 Mazda CX-7 Workshop Manual.pdf”
TABLE OF CONTENTS
GENERAL INFORMATION 00
ENGINE 01
SUSPENSION 02
DRIVELINE/AXLE 03
BRAKES 04
TRANSMISSION/TRANSAXLE 05
STEERING 06
HEATER, VENTILATION & AIR CONDITIONING (HVAC) 07
RESTRAINTS 08
BODY & ACCESSORIES 09
ALPHABETICAL INDEX AI
FEBRUARY 2006 Form No. 1871–1U–06B
Part No. 9999–95–034B–07
1,772 pages
VEHICLE IDENTIFICATION NUMBERS (VIN) JM3 ER29L✻7# 100001—
JM3 ER293✻7# 100001—

Please download with your computer instead of mobile devices ASAP (link valid for 48 hours).

For more quality manuals, please visit,
qualityservicemanual.com