Day: March 4, 2019

INSTANT DOWNLOAD (add to cart)

Complete Repair Technical Manual for John Deere 329E and 333E Backhoe Loader. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

John Deere 329E and 333E Backhoe Loader Repair Technical Manual (TM12808)(including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

TM12808 – 329E and 333E Compact Track Loaders Technical Manual (Repair).pdf
402 pages, bookmarked, Searchable, Printable, high quality PDF

EXCERPT:
Foreword.pdf
Manual Identification
00 – General Information
01 – Wheels or Tracks
02 – Axles and Suspension Systems
03 – Transmission
04 – Engine
05 – Engine Auxiliary System
17 – Frame or Supporting Structure
18 – Operator’s Station
19 – Sheet Metal and Styling
20 – Safety and Convenience
21 – Main Hydraulic System
31 – Loader
99 – Dealer Fabricated Tools
…
1. Remove front attachment and park machine on flat, level surface. See Park and Prepare for Service Safely . (Group 0001.)
2. Raise operator’s station. See Raising Operator’s Station . (Group 1810.)
3. Remove footwell. See Footwell Remove and Install . (Group 1910.)
4. Remove hydrostatic pumps. See Hydrostatic Pump Remove and Install . (Group 0360.)
5. Mark position of hub coupler (2) on hydrostatic pump input shaft (3) to aid in assembly.
6. Remove set screws (1) and hub coupler.
TX1131585A-UN: Hub Coupler
LEGEND:
1 – Set Screw (2 used)
2 – Hub Coupler
3 – Hydrostatic Pump Input Shaft
27 – Left Hydrostatic Pump
7. Clean and inspect parts. Repair or replace as necessary.
…

INSTANT DOWNLOAD (add to cart)

Complete workshop & service manual with electrical wiring diagrams for Nissan Primastar (X83) 2001-2014. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Nissan Primastar (X83) 2001-2014 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MAKE: Nissan
MODEL: Primastar (Model X83 Series)(a.k.a. Renault Trafic, Opel/Vauxhall Vivaro)
YEAR: 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014
LANGUAGE: English
FORMAT: PDF
PAGES: 1,621+

EXCERPT:
MANUAL GEARBOX Repairing the gearbox
Check that the unit setting washer (A) is correctly fitted.
Apply a line of silicone around the gasket face (B).
Offer up the mechanism housing while moving the gear shift finger towards the front and engage it.
Adjust the controls to engage the finger in the unit fork.
Position the bolts around the unit.
Pretighten bolts (2) and (14) to 1 daNm.
Turn the primary shaft while shifting the gears.
Tighten all the bolts to 2.4 daNm in the order shown in the diagram below.
Refit the selector finger (1), the control cable mounting (2) and the reversing light switch (3).
…

INSTANT DOWNLOAD (add to cart)

John Deere 326E Backhoe Loader Repair Technical Manual (TM13091X19)
Complete Repair Technical Manual for John Deere 326E Backhoe Loader. It’s the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

John Deere 326E Backhoe Loader Repair Technical Manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

TM13091X19 – 326E Skid Steer Loader (Manual Controls).pdf
451 pages, bookmarked, Searchable, Printable, high quality PDF

EXCERPT:
TM13091X1900 – General Information
TM13091X1901 – Wheel or Tracks
TM13091X1902 – Axles and Suspesion Systems
TM13091X1903 – Transission
TM13091X1904 – Engine
TM13091X1905 – Engine Auxiliary System
TM13091X1917 – Frame or Supporting Structure
TM13091X1918 – Operator’s Station
TM13091X1919 – Sheet Metal and Styling
TM13091X1920 – Safety and Convenience
TM13091X1921 – Main Hydraulic System
TM13091X1931 – Loader
TM13091X1999 – Deal Fabricated Tools
…
If necessary, remove hydraulic oil filter manifold. See Hydraulic Oil Filter Manifold Remove and Install . (Group 3160.)
9. TX1151196A-UN: Hydraulic Oil Cooler (326E with heavy duty cooler shown)
LEGEND:
1 – Cap Screw (4 used SD cooler, 2 used HD cooler)
2 – Filler Neck
3 – Bracket
69 – Hydraulic Oil Cooler
198 – Hydraulic Oil Cooler-to-Hydraulic Oil Reservoir Line
241 – Hydraulic Control Valve-to-Hydraulic Oil Cooler Bypass Valve Line
Install identification tags and disconnect hydraulic hoses (198 and 237 or 241) from hydraulic oil cooler. Close all openings using caps and plugs.
10. Remove cap screws (1) and move bracket (3) to provide clearance for hydraulic oil cooler.
11. Remove hydraulic oil cooler.
12. Clean and inspect parts. Repair or replace as necessary.
13. Install hydraulic oil cooler.
14. Move bracket to original position and install cap screws.
15. Connect hydraulic hoses to hydraulic oil cooler.
16. If removed, install hydraulic oil filter manifold. See Hydraulic Oil Filter Manifold Remove and Install . (Group 3160.)
17. If removed, install final fuel filter assembly. See Final Fuel Filter Assembly Remove and Install . (Group 0560.)
18. Remove vacuum or fill hydraulic reservoir.
…